Alexander Y. Hwang,Hubert S. Stokowski,Taewon Park,Marc Jankowski,Timothy P. McKenna,Carsten Langrock,Jatadhari Mishra,Vahid Ansari,Martin M. Fejer,Amir H. Safavi-Naeini
Abstract:Mid-infrared spectroscopy, an important and widespread technique for sensing molecules, has encountered barriers stemming from sources either limited in tuning range or excessively bulky for practical field use. We present a compact, efficient, and broadly tunable optical parametric oscillator (OPO) device surmounting these challenges. Leveraging a dispersion-engineered singly-resonant OPO implemented in thin-film lithium niobate-on-sapphire, we achieve broad and controlled tuning over an octave, from 1.5 to 3.3 microns by combining laser and temperature tuning. The device generates > 25 mW of mid-infrared light at 3.2 microns, offering a power conversion efficiency of 15% (45% quantum efficiency). We demonstrate the tuning and performance of the device by successfully measuring the spectra of methane and ammonia, verifying our approach's relevance for gas sensing. Our device signifies an important advance in nonlinear photonics miniaturization and brings practical field applications of high-speed and broadband mid-infrared spectroscopy closer to reality.
What problem does this paper attempt to address?
This paper attempts to address the challenges faced by mid - infrared (MIR) spectroscopic techniques in practical applications. Specifically, current MIR light sources have problems such as a limited tuning range or being too bulky for on - site use. The authors propose a compact, efficient, and widely tunable optical parametric oscillator (OPO) device to overcome these challenges.
### Main problems and solutions
1. **Limited tuning range**:
- **Problem**: Existing MIR light sources such as quantum - cascade lasers and inter - band - cascade lasers, although their output power and efficiency have been improved, the gain bandwidth defined by the material limits their tuning range, and they can usually be tuned only within a few hundred wavenumbers.
- **Solution**: By designing a single - resonant OPO based on thin - film lithium niobate (LN) and combining pump laser and temperature tuning, a wide tuning range from 1.5 to 3.3 micrometers has been achieved.
2. **Bulky size**:
- **Problem**: Traditional OPO systems, due to the use of bulk optical elements, result in large - sized devices, high threshold power, high cost, and difficulty in stabilization.
- **Solution**: By using nanophotonic circuits on a thin - film lithium niobate - sapphire platform, a highly integrated miniaturized OPO has been realized, significantly reducing the device size and improving stability.
3. **Limitations in practical applications**:
- **Problem**: Despite the progress in laboratory research, the promotion of OPO in practical applications has been hindered due to the above - mentioned limitations.
- **Solution**: By optimizing the cavity design and material selection, the OPO can perform efficient and stable MIR spectroscopic measurements on a compact chip platform, which is suitable for practical applications such as gas sensing.
### Experimental verification
To verify the effectiveness of this device, the authors successfully measured the spectra of methane and ammonia, demonstrating its potential in gas sensing. This device not only inherits the advantages of traditional OPO as an MIR light source (such as a wide tuning range and high resolution) but also brings additional advantages through nanophotonic integration, such as smaller size, better stability, and lower threshold power.
### Future prospects
The authors point out that the key to further improving this device lies in increasing the coupling efficiency from the input fiber to the chip and from the output chip to the detector, and reducing the threshold power by optimizing the waveguide manufacturing process. In addition, adding an electro - optically tunable wavelength - selective intracavity etalon will further enhance the performance of the device, making it more suitable for practical applications.
In conclusion, this paper presents a new type of MIR spectroscopic technique, providing an important progress for the development of portable, real - time MIR biosensors and gas monitoring systems.