Abstract:Recent experimental investigations have widened the understanding of metal dusting significantly. Microscopic observations have been used to dissect dusting mechanisms. Iron dusts by growing a cementite surface scale, which catalyses graphite nucleation and growth. The resulting volume expansion leads to cementite disintegration. Cementite formation on iron can be suppressed by alloying with germanium. Nonetheless, dusting occurs via the direct growth of graphite into the metal, producing nanoparticles of ferrite. This process is faster, because carbon diffusion is more rapid in α‐Fe than in Fe3C. Austenitic materials cannot form cementite, and dust via formation of graphite at external surfaces and interior grain boundaries. The coke deposit consists of carbon nanotubes with austenite particles at their tips, or graphite particles encapsulating austenite. TEM studies demonstrate the inward growth of graphite within the metal interior. It is therefore concluded that the dusting mechanism of austenitic materials like high alloy Cr–Ni steels and Ni base materials is one of graphite nucleation and growth within the near surface metal. In all alloys examined, both ferritic and austenitic, the principal mass transfer process is inward diffusion of carbon. Alloying iron with nickel leads to a transformation from one mechanism with carbide formation to the other without. Copper alloying in nickel and high nickel content stainless steels strongly suppresses graphite nucleation, as does also an intermetallic Ni–Sn phase, thereby reducing greatly the overall dusting rate. A surface layer of intermetallic Ni–Sn Fe‐base materials facilitates the formation of a Fe3SnC surface scale which also prevents coking and metal dusting. Current understanding of the roles of temperature, gas composition and surface oxides on dusting rates are summarised. Finally, protection against metal dusting by coatings is discussed in terms of their effects on catalysis of carbon deposition, and on protective oxide formation.

An in vivo Study of the Influence of the Surface Roughness of Implants on the Microbiology of Supra- and Subgingival Plaque

Long-term dust generation from silicon carbide powders

Diagnosis of deep endometriosis by clinical examination during menstruation and plasma CA-125 concentration.

Powder Disperser for the Continuous Aerosolizing of Dry Powdered Nanoparticles

Computational fluid dynamics simulations of aerosol behavior in a high-speed (Heubach) rotating drum dustiness tester

Numerical investigation of powder aerosolization in a mining rock dust dispersion chamber

Development of handling energy factors for use of dustiness data in exposure assessment modelling

Mobilized blood cells vs bone marrow harvest: experience compared in 171 donors with particular reference to pain and fatigue

Numerical investigation of powder aerosolization in a rotating drum apparatus

Particle Aerosol Generation and potential Altering in Airflow used for Acute/Repeated Inhalation Toxicity Testing

The FMCAD 2014 graduate student forum

Characterisation and modification of the porous metal foams used for the EN 15051-2 dustiness rotating drum test

Quantification of Airborne Concentrations of Nanoscale Dusts by Particle Gravimetry Using Ionic‐Liquid Modified Polymeric Electrospun Fibers

An Investigation on the Relationship between Dust Emission and Air Flow as Well as Particle Size with a Novel Containment Two-Chamber Setup

Deagglomeration of Airborne Nanoparticles in a Decelerating Supersonic Round Jet

Recent advances in understanding metal dusting: A review

Effect on ignition sensitivity of combustible dust particle size reduction due to dispersion in the 20-L chamber

The tissue dust analysis system: a new device and methodology to quantify dusting and linting propensity in hygiene tissue papers

Investigations on different distribution systems for dusts inside the 20L-sphere

Measurement of the Nanoparticles Distribution in Flat and Pleated Filters During Clogging

Rotational force test method for determination of particle adhesion—from a simplified model to realistic dusts