Abstract:High proportion of renewable energy generation, especially wind power generation, has changed the dynamic behavior of power systems and leads to emerging stability issues such as oscillation accidents. The commonly used stability analysis methods based on linear system theory cannot tackle the influence of nonlinear elements in the control loop. To fill this gap, the describing function method is used to analyze the stability and power oscillations of a grid-connected permanent magnet synchronous generator (PMSG) wind power generation system in this paper. A complete PMSG system model is taken into consideration, including a wind turbine, a generator, a machine-side converter, a grid-side converter, and a weak grid. Particularly, the nonlinear element introduced by maximum power point tracking control in the power control loop is modeled and analyzed, and the influences of critical system parameters are studied. With the high accuracy of the describing function method, it is revealed that the machine-side converter mainly influences the oscillation amplitude, while the grid-side converter mainly influences the oscillation frequency. Furthermore, the following results can be obtained: 1) High bandwidth of maximum power point tracking control and rotation speed control may enlarge the oscillation amplitude, while a fast current loop of the machine-side converter is beneficial to the stability; 2) Grid-side voltage loop can significantly affect the frequency of the oscillation, and improper high bandwidth of a phase-locked loop (PLL) is harmful to system stability; 3) A stronger grid is not always beneficial to the system stability, and the influence of grid strength should be carefully analyzed and examined when nonlinear elements are considered. All analyses are verified by simulations based on MATLAB/Simulink.

Nonlinear Stability Assessment Of Type-4 Wind Turbines During Unbalanced Grid Faults Based On Reduced-Order Model

Impact of Wind Turbines on Power System Stability

Stability Analysis and Enhancement of Type-4 Wind Turbines Connected to Very Weak Grids Under Severe Voltage Sags

Modeling and Control of Wind Turbine with Doubly Fed Induction Generator

An Extended Nonlinear Stability Assessment Methodology For Type-4 Wind Turbines via Time Reversal Trajectory

Impedance-based Analysis of Potential Stability Risk Between Grid-Forming and Grid-Following Wind Turbine Systems

Small Disturbance Stability Analysis of Weak-Grid-Connected DFIG-Based Wind Power System

Small Signal Modeling and Stability Analysis of A Dfig Based Wind Power System under Unbalanced Grid Voltage Condition

Impedance Aggregation Method of Multiple Wind Turbines and Accuracy Analysis

Power Oscillation Analysis of PMSG Wind Power Generation System Considering Power Control Nonlinearity

Nonlinear Stability Boundary Assessment of Multi-Converter Systems Based On Reverse Time Trajectory

Impedance Modeling and Stability Analysis of VSG Controlled Type-IV Wind Turbine System

Simplified Equivalent Models of Large-Scale Wind Power and Their Application on Small-Signal Stability

Intelligent Parameter Design-Based Impedance Optimization of STATCOM to Mitigate Resonance in Wind Farms

Small-Signal Modeling and Analysis of DC-Link Dynamics in Type-IV Wind Turbine System

Stability Analysis based on Parameter Sensitivity for Large-Scale Renewable Energy Bases Considering Frequency Coupling Characteristic

Hybrid Frequency-Domain Modeling and Stability Analysis for Power Systems with Grid-Following and Grid-Forming Converters

Transient Stability Analysis of Grid-Connected Converters Based on Reverse-Time Trajectory

Dynamic Modeling and Stability Analysis for Repeated LVRT Process of Wind Turbine Based on Switched System Theory

Reduced-order modeling of DFIG-based wind turbine connected into weak AC grid based on electromechanical time scale

Nonlinear Stability Boundary Assessment Of Wind Power Plants Based on Reverse-Time Trajectory