Abstract:Faradaic deionization (FDI) is a promising technology for energy-efficient water desalination using porous electrodes containing redox-active materials. Herein, we demonstrate for the first time the capability of a symmetric FDI flow cell to produce freshwater (<17.1 mM NaCl) from concentrated brackish water (118mM), to produce effluent near freshwater salinity (19.1 mM) from influent with seawater-level salinity (496 mM), and to reduce the salinity of hypersaline brine from 781 mM to 227 mM. These remarkable salt-removal levels were enabled by using flow-through electrodes with high areal-loading of nickel hexacyanoferrate (NiHCF) Prussian Blue analogue intercalation material. The pumping energy consumption due to flow-through electrodes was mitigated by embedding an interdigitated array of <100 $\mu$m wide channels in the electrodes using laser micromachining. The micron-scale dimensions of the resulting embedded, micro-interdigitated flow fields (e$\mu$-IDFFs) facilitate flow-through electrodes with high apparent permeability while minimizing active-material loss. Our modeling shows that these e$\mu$-IDFFs are more suitable for our intercalation electrodes because they have >100X lower permeability compared to common redox-flow battery electrodes, for which millimetric flow-channel widths were used exclusively in the past. Total desalination thermodynamic energy efficiency (TEE) was improved by more than ten-fold relative to unpatterned electrodes: 40.0% TEE for brackish water, 11.7% TEE for hypersaline brine, and 7.4% TEE for seawater-salinity feeds. Water transport between diluate and brine streams and charge efficiency losses resulting from (electro)chemical effects are implicated as limiting energy efficiency and water recovery, motivating their investigation for enhancing future FDI performance.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to improve the salt removal rate and energy efficiency in the seawater desalination process. Specifically, the researchers have developed a new electrode structure - the embedded micro - interdigitated flow fields (eµ - IDFFs) to achieve the following goals: 1. **Improve the salt removal rate**: By using nickel hexacyanoferrate (NiHCF) with a high areal loading as an intercalation material and combining it with the embedded micro - interdigitated flow fields (eµ - IDFFs), significant salt removal effects can be achieved when treating high - salinity water such as seawater and high - concentration brine. The experimental results show that this new - type electrode can desalinate seawater (496 mM NaCl) to near - freshwater salinity (19.1 mM) and reduce the salinity of high - concentration brine (781 mM) to 227 mM. 2. **Reduce energy consumption**: One of the main challenges faced by traditional flow electrodes in high - salinity water treatment is excessive pumping energy consumption. By introducing eµ - IDFFs, the researchers have successfully reduced the pumping energy consumption by more than ten times, significantly improving the total desalination thermodynamic energy efficiency (TEE). For example, for brackish water (118 mM NaCl), the TEE reaches 40.0%; for high - concentration brine (781 mM), the TEE also reaches 11.7%. 3. **Optimize electrode design**: Traditional electrode designs have problems of low utilization rate of active materials and large pumping losses in high - salinity water treatment. By embedding micro - interdigitated flow fields, the researchers have not only improved the permeability of the electrodes but also reduced the loss of active materials, thereby achieving higher salt removal rates and energy efficiencies. In conclusion, through innovative electrode design and flow - field structure, this paper aims to overcome the limitations of existing technologies in high - salinity water treatment and provides a new solution for achieving efficient and low - energy - consumption seawater desalination.

Embedded, micro-interdigitated flow fields in high areal-loading intercalation electrodes towards seawater desalination and beyond

Ion transport channels in redox flow deionization enable ultra-high desalination performance

Three-dimensional titanium mesh-based flow electrode capacitive deionization for salt separation and enrichment in high salinity water

Sulfonated Phthalocyanine Redox Flow Cell for High-Performance Electrochemical Water Desalination

Flow-electrode capacitive deionization enables continuous and energy-efficient brine concentration

Ion-Selective Metathesis Design of Flow-Electrode Capacitive Deionization for Energy-Saving and Anti-Scaling Softening of Brackish Water

Theoretical evaluation of electrochemical cell architectures using cation intercalation electrodes for desalination

Facial synthesis of FeOOH array-anchored carbon fiber as flow-through chloride-capturing electrode for ultrafast and super-stable capacitive deionization

Asymmetric and Symmetric Redox Flow Batteries for Energy-Efficient, High-Recovery Water Desalination

Single modular flow-electrode capacitive deionization using modified Prussian blue analogues as cation intercalation electrode for continuous water desalination

Up-shifting the desalination rate limit of capacitive deionization via integrating chloride-capturing Bi nanocluster with flow-through cell architecture

Nickel Hexacyanoferrate Electrodes for Continuous Cation Intercalation Desalination of Brackish Water

Indirect charing of carbon by aqueous redox mediators contributes to the enhanced desalination performance in flow-electrode CDI

Mechanism insight into improved desalination performance and energy efficiency in redox flow deionization with ion exchange resins

Flow electrode capacitive deionization with iron-based redox electrolyte

Enhanced Charge Efficiency and Electrode Separation Utilizing Magnetic Carbon in Flow Electrode Capacitive Deionization

Flow-electrode capacitive deionization: A review and new perspectives

Redox flow deionization using Prussian blue and functionalized ion exchange membrane for enhanced selective ion recovery

Engineering Faradaic Electrode Materials for High‐Efficiency Water Desalination

Improving the Thermodynamic Energy Efficiency of Battery Electrode Deionization Using Flow-Through Electrodes

A novel two-stage continuous capacitive deionization system with connected flow electrode and freestanding electrode