Abstract:In the present paper, the Al–Fe-Mo phase diagram was studied by X-ray diffraction (XRD), differential thermal analysis, differential scanning calorimetry, scanning electron microscopy and electron probe microanalysis. For the first time, isothermal sections at 1450, 1300 and 1200 °C were experimentally determined over the entire range of compositions. A ternary intermetallic compound τ (Mo 3 FeAl 8 ) with a TiAl 3 -type structure was observed at all above temperatures. It has been shown that isostructural disordered bcc (A2) phases of pure elements Fe and Mo (W-type structure, cI 2 - in the ternary system at 1450 °C form a continuous solid solution (Mo,Fe,Al), dissolving up to 50 at.% Al. When cooled, it decomposes into a Mo-rich part and an elongated area (Fe,Al) along Fe-Al side. As the temperature decreases, their homogeneity regions reduce in size and shift toward higher Mo and Fe contents, respectively. The μ (Mo 6 Fe 7 ) phase, which in the Fe-Mo binary system is formed in the solid state at 1368 °C, deeply extends into the ternary system, up to 16 and 15 at.% at 1300 and 1200 °C, respectively, where Al substitutes for Fe. Since the addition of Mo stabilizes the ε (Fe 5 Al 8 ) phase, and the temperature of its formation in the ternary system is higher than in the binary (1331 and 1234 °C, respectively), the isothermal section at 1300 °C contains a narrow homogeneity region of this phase. In contrast, the solubility of Mo in ε at 1200 °C is no less than 14.4 at.%. The boundary Al-Mo binary and Al–Fe-Mo ternary systems are thermodynamically remodeled based on our experimental results and novel information reported in literature. Thermodynamic modeling was carried out by the CALPHAD (CALculation of PHAse Diagrams) approach using Thermo-Calc software. Calculations performed using the proposed thermodynamic description well reproduce most of the experimental data, including data from the available literature. Based on the developed description, phase diagrams of the constituent binary systems, as well as liquidus and solidus projections, selected isothermal and isopleths sections and the reaction scheme of the ternary system were calculated.

Thermal expansion anisotropy of the Fe23Mo16 and Fe7Mo6 Mu-phases predicted from first-principles calculations

Density functional theory investigation of the phonon instability, thermal equation of state and melting curve of Mo.

First-principles phonon calculations of thermal expansion path of Fe2Mo Laves phase

Thermal expansion in FeCrCoNiGa high-entropy alloy from theory and experiment

Calculation of thermal expansion coefficient of Fe/sub 3/Al with the addition of transition metal elements

Preparation and characterization of orthorhombic Fe-2(MoO4)(3) and first-principle study of its negative thermal expansion properties

Strong Coupling of Magnetism and Lattice Induces Near-Zero Thermal Expansion over Broad Temperature Windows in ErFe<sub>10</sub>V<sub>2-<i>x</i></sub>Mo<i><sub>x</sub></i> Compounds

Negative Thermal Expansion over a Wide Temperature Range in Fe-Doped MnNiGe Composites

Exploring the negative thermal expansion and magnetocaloric effect in Fe 2 (Hf,Ti) Laves phase materials

Experimental and DFT Insights into Elastic, Magnetic, Electrical, and Thermodynamic Properties of MAB‐phase Fe2AlB2

Understanding the origin of the particularly small and anisotropic thermal expansion of MOF-74

First-Principles Calculations of Elastic and Thermodynamic Properties for Multi-component Co-based Superalloys

Effect of Mo on Phase Stability and Properties in FeMnNiCo High-Entropy Alloys

Atomistic Simulation for the Phase Stability, Site Preference and Thermal Expansion of YFe12−xTx (t=ti, V, Cr, Mn, Zr, Nb, Mo, W)

First-Principles Study of Mechanical and Thermodynamic Properties of Binary and Ternary CoX (X = W and Mo) Intermetallic Compounds

High performance and low thermal expansion in Er-Fe-V-Mo dual-phase alloys

Thermo-mechanical properties of Ni-Mo solid solutions: A first-principles study

Thermodynamic re-modeling of the binary Al–Mo and ternary Al–Fe–Mo systems based on novel experimental data

Martensitic Transition and Electronic, Magnetic, Thermal, and Thermoelectric Properties of Metallic Ferromagnetism Ni2Mn1-xGa1-yFex+y Shape Memory Alloys: Ab Initio Calculations

Anisotropic thermal expansion of Fe1.06Te and FeTe0.5Se0.5 single crystals

Negative thermal expansion in the superconducting precursor phase SmFeAsO.