Abstract:Understanding the interaction mechanics between graphene layers and co-axial carbon nanotubes (CNTs) is essential for modeling graphene and CNT-based nanoelectromechanical systems. This work proposes a new continuum contact model to study interlayer interactions between curved graphene sheets. The continuum model is calibrated and validated using molecular dynamics (MD) simulations. These are carried out employing the reactive empirical bond order (REBO)+Lennard-Jones (LJ) to model the interactions within a sheet, while the LJ, Kolmogorov-Crespi (KC), and Lebedeva potentials are used to model the interactions between sheets. The continuum contact model is formulated for separation distances greater than 0.29nm, when sheet deformations are sufficiently small and do not affect the sheet interactions substantially. This allows to treat the master contact surface as rigid, thus simplifying the contact formulation greatly. The model calibration is conducted systematically for a sequence of different stackings using existing and newly proposed ansatz functions. The calibrated continuum model is then implemented in a curvilinear finite element (FE) shell formulation to investigate the pull-out and twisting interactions between co-axial CNTs. The resisting pull-out forces and torques depend strongly on the chirality of the considered CNTs. The absolute differences between FE and MD results are very small, and can be attributed to model assumptions and loading conditions.

What problem does this paper attempt to address?

This paper aims to solve the problem of the mechanics of inter - layer interactions in graphene, especially the friction problem between curved graphene sheets. Specifically, the researchers proposed a new continuous contact model for studying the interactions between curved graphene sheets. This model takes into account the effects of surface anisotropy and curvature, and has been calibrated and verified through molecular dynamics (MD) simulations. The purpose of the model is to better understand and predict the performance of nano - electromechanical systems based on graphene and carbon nanotubes (CNTs), especially in pull - out and torsional interactions. The key points of the paper include: 1. **Model development**: A new continuous contact model was proposed, which is suitable for describing the non - dissipative anisotropic interactions between curved graphene sheets. 2. **Model calibration**: The model was calibrated using molecular dynamics simulation data at near - zero Kelvin, covering a wide range of contact pressure. 3. **Finite element implementation**: The calibrated continuous contact model was applied to the nonlinear finite element contact formula. 4. **Application and verification**: The model was applied to the pull - out and torsional processes of double - walled carbon nanotubes (DWCNTs), and the validity of the model was verified by comparing with the results of molecular dynamics simulations and analytical results. Through these studies, the authors hope to provide a more accurate tool to help scientists and engineers design and optimize nano - electromechanical systems based on graphene and carbon nanotubes.

A continuum contact model for friction between graphene sheets that accounts for surface anisotropy and curvature

Pullout Strength of Graphene and Carbon Nanotube/epoxy Composites

Thermomechanical analysis of the effect of contact forces in heat conduction of composite materials through multiscale contact finite element modeling

Nonlinear modeling of nanoscale interaction forces between atomic force microscope and carbon nanotubes

Mechanical response of van der Waals and charge coupled carbon nanotubes

Continuum Modeling of Boron Nitride Nanotubes

A multiscale computational framework for the analysis of graphene involving geometrical and material nonlinearities

Continuum contact models for coupled adhesion and friction

A new efficient hyperelastic finite element model for graphene and its application to carbon nanotubes and nanocones

Simulation of Friction between Single-walled Carbon Nanotube and Graphite Substrate

Continuum models for the contact line problem

An atomistically enriched continuum model for nanoscale contact mechanics and its application to contact scaling

Continuum Modeling Of Van Der Waals Interactions Between Carbon Nanotube Walls

Modal analysis of graphene-based structures for large deformations, contact and material nonlinearities

Molecular Dynamics Simulation of Friction and Energy Dissipation between Carbon Nanotube and Graphite Substrate

Adhesion Between Two Carbon Nanotubes: Insights from Molecular Dynamics Simulations and Continuum Mechanics

Optimization-based approach to the calibration of mesoscale mechanical models for carbon nanotube systems

Study of axial strain-induced torsion of single-wall carbon nanotubes using the 2D continuum anharmonic anisotropic elastic model

Nonlocal Continuum Model for Vibration of Single-Layered Graphene Sheets Based on the Element-Free Kp-Ritz Method

Rotational Friction Correlated with Moire Patterns in Strained Bilayer Graphene: Implications for Nanoscale Lubrication