Abstract:The applicability of computational fluid dynamics (CFD) based design tools depend on the accuracy and complexity of the physical models, for example turbulence models, which remains an unsolved problem in physics, and rotor models that dictates the computational cost of rotorcraft and wind/hydro turbine farm simulations. The research focuses on investigation of the ability of neural networks to learn correlation between desired modeling variables and flow parameters, thereby providing surrogate models. For the turbulence modeling, the machine learned turbulence model is developed for unsteady boundary layer flow, and the predictions are validated against DNS data and compared with one-equation unsteady Reynolds Averaged NavierStokes (URANS) predictions. The machine-learned model performs much better than the URANS model due to its ability to incorporate the non-linear correlation between turbulent stresses and rate-of-strain. The development of the surrogate rotor model builds on the hypothesis that if a model can mimic the axial and tangential momentum deficit generated by a blade resolved model, then it should produce a qualitatively and quantitatively similar wake recovery. An initial validation of the hypothesis was performed, which showed encouraging results.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop surrogate models for turbulence and rotor models using machine - learning techniques in order to improve the accuracy and efficiency of computational fluid dynamics (CFD) simulation tools. Specifically: 1. **Turbulence Modeling**: - Develop a machine - learning turbulence model for unsteady boundary - layer flow prediction. This model improves the prediction accuracy by learning the nonlinear correlation between turbulence stress and strain rate. - Verify the performance of the machine - learning turbulence model relative to the traditional single - equation unsteady Reynolds - averaged Navier - Stokes (URANS) model, especially its superiority in dealing with unsteady flows. 2. **Rotor Modeling**: - Explore the application of neural networks in rotor modeling, especially how to generate wake recovery similar to blade - resolved models by simulating axial and tangential momentum deficits. - Develop a medium - fidelity rotor model that can consider the unsteadiness of upstream flow and vortex generation, thereby improving the prediction accuracy of rotor flow. ### Specific Problems in Vortex Modeling - **Unsteady Boundary - Layer Flow**: Traditional URANS models have limitations in dealing with unsteady flows, especially in accurately capturing the nonlinear relationship between turbulence stress and strain rate. The paper uses a machine - learning method and trains the model with direct numerical simulation (DNS) data to improve the prediction ability for unsteady boundary - layer flow. - **Nonlinear Relationship between Turbulence Stress and Strain Rate**: Through the machine - learning model, the complex nonlinear relationship between turbulence stress and strain rate can be better captured, thereby improving the prediction accuracy. ### Specific Problems in Rotor Modeling - **Wake Prediction**: Wake prediction of rotor flow is crucial for the design of vertical take - off and landing aircraft and wind/hydraulic turbines. Traditional low - fidelity models such as the actuator disk model and the actuator line model, although having a lower computational cost, cannot accurately simulate three - dimensional flow and the unsteadiness of upstream flow. - **Medium - Fidelity Model**: The paper proposes a machine - learning - based medium - fidelity rotor model that generates wake recovery similar to high - fidelity models by learning the axial and tangential momentum deficits of blade - resolved models. ### Summary This paper aims to develop more accurate and efficient turbulence and rotor models through machine - learning techniques to overcome the limitations of traditional CFD models in dealing with complex flow problems. This not only helps to improve the prediction ability of engineering design tools but also significantly reduces the computational cost.

Predictions of steady and unsteady flows using machine-learned surrogate models

Enhancement of Unsteady and 3D Aerodynamics Models using Machine Learning

Surrogate modeling a computational fluid dynamics-based wind turbine wake simulation using machine learning

Machine Learning-augmented Predictive Modeling of Turbulent Separated Flows over Airfoils

Surrogate Modeling of Aerodynamic Simulations for Multiple Operating Conditions Using Machine Learning

Machine Learning Methods for Turbulence Modeling in Subsonic Flows Around Airfoils

RANS turbulence model development using CFD-driven machine learning

A turbulent eddy-viscosity surrogate modeling framework for Reynolds-averaged Navier-Stokes simulations

One neural network approach for the surrogate turbulence model in transonic flows

Data-driven prediction of complex flow field over an axisymmetric body of revolution using Machine Learning

Transition Modeling for Low Pressure Turbines Using Computational Fluid Dynamics Driven Machine Learning

RANS-AD based ANN surrogate model for wind turbine wake deficits

Integration of Machine Learning and Computational Fluid Dynamics to Develop Turbulence Models for Improved Turbine Wake Mixing Prediction

Machine Learning Surrogates for Predicting Response of an Aero-Structural-Sloshing System

Coarse-Grid Computational Fluid Dynamic (CG-CFD) Error Prediction using Machine Learning

Turbulence Modeling Via Data Assimilation and Machine Learning for Separated Flows over Airfoils

Data-driven RANS closures for improving mean field calculation of separated flows

Two-Dimensional Prediction of Transient Cavitating Flow Around Hydrofoils Using a DeepCFD Model

Surrogate-Based Recurrence Framework Approach To Unsteady Aerodynamic Modeling Of Wind Turbine Airfoils

Geometry-aware PINNs for Turbulent Flow Prediction

Physics-informed Machine Learning Approach for Augmenting Turbulence Models: A Comprehensive Framework