Abstract:2D and 3D numerical simulations with two-fluid approach were conducted to investigate the gas-liquid flow dynamic behaviour in a rectangle bubble column. In the simulations, k-ε and RNG k-ε turbulent models, which account for the influence of the bubbles on liquid phase turbulence, were employed to study the effect of such models on predication of the dynamic behaviour of the bubble plume. In addition, the influence of different interfacial force closures such as drag, lift and added mass forces were also assessed. The simulation results indicated that for the 2D cases, the use of k-ε model could merely yield a steady flow pattern with one big liquid circulation, while the use of RNG k-ε model could produce a steady flow pattern, characterised by the appearance of three large vortices. However, all the 3D simulations have captured the plume meandering behaviour. The results showed that the value of the turbulence eddy viscosity predicted with 3D simulation was one order smaller than that with 2D simulation. Particularly, the meandering period of the bubble plume predicted by RNG k-ε model, was obviously smaller than that predicted using k-ε model in 3D simulations. The former gave the average turbulence eddy viscosity to be almost one third of that predicted by the latter. The assessment of the use of different interfacial force closures and their combinations showed that the lift force has a pronounced effect on the result of bubbly flow behaviour besides the drag force. It was found that the predicted meandering period was much greater than the experimental observations without the inclusion of the lift force, while the predicted period was consistent with the experimental result when the lift force was considered. Our simulations also revealed that the inclusion of the added mass force could notably improve the prediction results.

Hydrodynamic characterization of bubble column using Dynamical High Order Decomposition approach

Hydrodynamic characterization of bubble column using Dynamical High Order Decomposition approach

2-D Hydrodynamic Model of Bubble Column Based on Lateral-Force Balance

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

CFD simulation of bubble column with vertical bundle internals

Hydrodynamics in Bubble Columns with Pin-Fin Tube Internals

Experimental Measurement and Theoretical Analysis on Bubble Dynamic Behaviors in a Gas-Liquid Bubble Column

Evolution and Interaction Characteristics of Liquid Flow and Bubbles in a Jet Bubbling Column

CFD Simulation of Gas-Liquid Flow in Bubble Column with Two-bubble Phase Population Balance Model

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

CFD Simulation of Gas-Liquid Flow in Bubble Column

Modelling of Mass Transfer for Gas-Liquid Two-Phase Flow in Bubble Column Reactor with a Bubble Breakage Model Considering Bubble-Induced Turbulence

Modelling and simulation of the dynamic flow behaviour in a bubble column

Hydrodynamic Study of a Hybrid Electro-Flotation Column

Computational Fluid Dynamics Modelling of Two-Phase Bubble Columns: A Comprehensive Review

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Numerical description of flow regime transitions in bubble column reactors by a multiple gas phase model

Numerical simulation of multiphase flow in bubble column reactors. Influence of bubble coalescence and break-up

CFD Simulation of Bubble Column Reactor Using Population Balance

Dynamic Modelling of Fluidisation in Gas-Solid Bubbling Fluidised Beds

Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces