2D MXene Electrochemical Transistors

Jyoti Shakya,Min-A Kang,Jian Li,Armin VahidMohammadi,Weiqian Tian,Erica Zeglio,Mahiar Max Hamedi

DOI: https://doi.org/10.1039/D3NR06540E

2024-01-11

Abstract:In the past two decades another transistor based on conducting polymers, called the organic electrochemical transistor (ECT) was shown and largely studied. The main difference between organic ECTs and FETs is the mode and extent of channel doping: while in FETs the channel only has surface doping through dipoles, the mixed ionic-electronic conductivity of the channel material in Organic ECTs enables bulk electrochemical doping. As a result, the organic ECT maximizes conductance modulation at the expense of speed. Until now ECTs have been based on conducting polymers, but here we show that MXenes, a class of 2D materials beyond graphene, have mixed ionic-electronic properties that enable the realization of electrochemical transistors (ECTs). We show that the formulas for organic ECTs can be applied to these 2D ECTs and used to extract parameters like mobility. These MXene ECTs have high transconductance values but low on-off ratios. We further show that conductance switching data measured using ECT, in combination with other in-situ ex-situ electrochemical measurements, is a powerful tool for correlating the change in conductance to that of redox state: to our knowledge, this is the first report of this important correlation for MXene films. Many future possibilities exist for MXenes ECTs, and we think other 2D materials with bandgaps can also form ECTs with single or heterostructured 2D materials. 2D ECTs can draw great inspiration and theoretical tools from the field of organic ECTs and have the potential to considerably extend the capabilities of transistors beyond that of conducting polymer ECTs, with added properties such as extreme heat resistance, tolerance for solvents, and higher conductivity for both electrons and ions than conducting polymers.

Materials Science,Applied Physics

What problem does this paper attempt to address?

The main problem this paper attempts to address is the exploration of the fabrication and performance of electrochemical transistors (ECTs) based on two-dimensional materials (MXenes). Specifically, the researchers aim to demonstrate whether MXenes, as a type of two-dimensional material, can achieve conductivity modulation through electrochemical doping similar to organic electrochemical transistors (OECTs), and further investigate the application potential of these materials in electrochemical transistors. ### The core issues of the paper include: 1. **Material Properties and Fabrication Methods**: The researchers first explored how to prepare multilayer MXene films through layer-by-layer (LbL) self-assembly technology and compared this fabrication method with spin coating in terms of film structure, electrochemical properties, and mixed ion/electron conductivity. 2. **Electrochemical Transistor Performance**: The researchers constructed MXene-based electrochemical transistors (ECTs) and evaluated the output characteristics and transfer characteristics of these devices, particularly focusing on key parameters such as switching characteristics, threshold voltage, and transconductance. 3. **Theoretical Models and Experimental Validation**: The researchers applied the theoretical models of organic ECTs to MXene ECTs and validated the effectiveness of these models through experimental data, particularly revealing the electrochemical behavior of MXene films at different potentials through spectroelectrochemical analysis. 4. **Performance Optimization and Application Prospects**: The researchers explored how to improve the performance of MXene ECTs by optimizing film thickness, electrolyte type, and gate material, and discussed the potential applications of these devices in future electronics and biosensors. In summary, this paper aims to systematically demonstrate the application potential of MXenes as a novel two-dimensional material in electrochemical transistors and provide a theoretical and experimental foundation for their further development.

2D MXene Electrochemical Transistors

Vertical Organic Electrochemical Transistors for Complementary Circuits

Ac Electrodeposition Of Pedot Films In Protic Ionic Liquids For Long-Term Stable Organic Electrochemical Transistors

A Semiconducting Two‐Dimensional Polymer as an Organic Electrochemical Transistor Active Layer

Large‐Area Electrode Deposition and Patterning for Monolayer Organic Field‐Effect Transistors by Vacuum‐Filtrated MXene

2D MXene–Molecular Hybrid Additive for High‐Performance Ambipolar Polymer Field‐Effect Transistors and Logic Gates

Iontronics Using V 2 CT x MXene-Derived Metal–Organic Framework Solid Electrolytes

Ion Exchange Gels Allow Organic Electrochemical Transistor Operation with Hydrophobic Polymers in Aqueous Solution

Synergistic Effect of Multi-Walled Carbon Nanotubes and Ladder-Type Conjugated Polymers on the Performance of N-Type Organic Electrochemical Transistors

Empowering Bioelectronics with Supramolecular Nanoarchitectonics: PEDOT-Based Organic Electrochemical Transistors with Tunable Electronic Properties

Organic Mixed Ionic Electronic Conductor Nanochannels for Vertical Electrochemical and Ionic Transistors

High-performance organic electrochemical transistors gated with 3D-printed graphene oxide electrodes

Fused Bithiophene Imide Dimer-Based n-Type Polymers for High-Performance Organic Electrochemical Transistors

Molecular design strategies for high‐performance organic electrochemical transistors

Electron-Ion Coupling Breaks Energy Symmetry in Organic Electrochemical Transistors

Organic field-effect transistors integrated with Ti2CTx electrodes

Porous Semiconducting Polymers Enable High‐Performance Electrochemical Transistors

Insight into conjugated polymers for organic electrochemical transistors

Miniature Organic Transistors With Carbon Nanotubes as Quasi-One Dimensional Electrodes

Small-Molecule Mixed Ionic-Electronic Conductors for Efficient N-Type Electrochemical Transistors: Structure-Function Correlations

Organic High Electron Mobility Transistors Realized by 2D Electron Gas.