Abstract:Mechanical properties of high-entropy alloys (HEAs) with the face-centered cubic (fcc) structure strongly depend on their initial grain orientations. However, the orientation-dependent mechanical responses and the underlying plastic flow mechanisms of such alloys are not yet well understood. Here, deformation of the equiatomic FeMnCoCrNi HEA with various initial orientations under uniaxial tensile testing has been studied by using atomistic simulations, showing the results consistent with the recent experiments on fcc HEAs. The quantitative analysis of the activated deformation modes shows that the initiation of stacking faults is the main plastic deformation mechanism for the crystals initially oriented with [001], [111], and [112], and the total dislocation densities in these crystals are higher than that with the [110] and [123] orientations. Stacking faults, twinning, and hcp-martensitic transformation jointly promote the plastic deformation of the [110] orientation, and twinning in this crystal is more significant than that with other orientations. Deformation in the crystal oriented with [123] is dominated by the hcp-martensite transformation. Comparison of the mechanical behaviors in the FeMnCoCrNi alloy and the conventional materials, i.e. Cu and Fe50Ni50, has shown that dislocation slip tends to be activated more readily in the HEA. This is attributed to the larger lattice distortion in the HEA than the low-entropy materials, leading to the lower critical stress for dislocation nucleation and elastic–plastic transition in the former. In addition, the FeMnCoCrNi HEA with the larger lattice distortion leads to an enhanced capacity of storing dislocations. However, for the [001]-oriented HEA in which dislocation slip and stacking fault are the dominant deformation mechanisms, the limited deformation modes activated are insufficient to improve the work hardening ability of the material.

Quasi-localized modes in crystalline high entropy alloys

Chemical composition dependent local lattice distortions and magnetism in high entropy alloys

Localization of vibrational modes in high-entropy oxides

Decoding Grain Boundary Thermodynamics in High-Entropy Alloys in a 5D Space: Coupled Segregation and Disordering

Local Lattice Distortion in High-Entropy Alloys

Inner relaxations in equiatomic single-phase high-entropy cantor alloy

Unveiling the atomic-scale origins of high damage tolerance of single-crystal high entropy alloys

Acoustic emission spectra and statistics of dislocation movements in Fe<sub>40</sub>Mn<sub>40</sub>Co<sub>10</sub>Cr<sub>10</sub> high entropy alloys

Vibrational Entropy Investigation in High Entropy Alloys

Three-dimensional atomic positions and local chemical order of medium- and high-entropy alloys

Structure, short-range order, and phase stability of the Al$_x$CrFeCoNi high-entropy alloy: Insights from a perturbative, DFT-based analysis

Edge dislocations in multi-component solid solution alloys: Beyond traditional elastic depinning

Thermal Spin Fluctuations in CoCrFeMnNi High Entropy Alloy

Simultaneous Twinning and Microband Formation Under Dynamic Compression in a High Entropy Alloy with a Complex Energetic Landscape

On the martensitic transformation in Fe$_{x}$Mn$_{80-x}$Co$_{10}$Cr$_{10}$ high-entropy alloy

Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys

Orientation-Dependent Mechanical Responses and Plastic Deformation Mechanisms of FeMnCoCrNi High-entropy Alloy: A Molecular Dynamics Study

Structure, short-range order, and phase stability of the Al x CrFeCoNi high-entropy alloy: insights from a perturbative, DFT-based analysis

Atomistic Simulations of Dislocation Behaviors in Cr-Mn-Fe-Co-Ni High-Entropy Alloys with Different Cr/Ni Ratio

Anomalies in the short-range local environment and atomic diffusion in single crystalline equiatomic CrMnFeCoNi high-entropy alloy