Abstract:Nanostructure titanium carbide MXene (Ti3C2Tx) was modified with KH2PO4 and chitosan to effectively remove strontium from nuclear wastewater. Nuclear waste includes radionuclides of uranium, thorium, strontium, and cesium, which are classified depending on the concentration of radionuclides. Nuclear waste with a high strontium concentration is the production waste of radiopharmaceutical production centers. Ti3C2Tx was synthesized from Ti3AlC2 using HF40% and HF in situ (MILD-Ti3C2Tx) in 24 h at 313.15 and 333.15 K. Morphology, structure, and functional groups were investigated using the XRD, SEM, EDS, FTIR, and BET analyses. The Sr(II)'s adsorption capacity on Ti3C2Tx-HF and Ti3C2Tx-HF in situ was obtained as 61.9 and 253.5 mg g-1, respectively (temperature, 298.15 K; pH, 7.00; contact time, 180 min; and Sr(II) concentration, 150 mg l-1). Ti3C2Tx-HF in situ showed fourfold adsorption due to more hydroxyl functional groups and larger interlayer spacing. Ti3C2Tx was modified with KH2PO4 and chitosan to investigate the mechanism of change of Sr(II)'s adsorption capacity, which increased to 370 and 284 mg g-1, respectively. The structural results of modified Ti3C2Tx showed that the surface functional groups increased when modified with chitosan. In addition, modification with KH2PO4, through encapsulating large amounts of KH2PO4 between Ti3C2Tx layers, increased the possibility of Sr(II) diffusion between layers and electrochemical interactions with hydroxyl groups, and thus, increased its adsorption. Some experiments were designed to investigate the effect of parameters like initial concentration of Sr(II), contact time, temperature, and pH solution, as well as modified- and unmodified-Ti3C2Tx on adsorbent. The results revealed that the adsorption process of Sr(II) with pristine and modified-Ti3C2Tx follows pseudo-second-order kinetics and Freundlich heterogeneous isotherm model. Freundlich model isotherm indicates the presence of various functional groups on the surface and between the pristine and modified Ti3C2Tx layers. Electrostatic reactions and intra-sphere complexation were the two dominant mechanisms of the adsorption process.

N-functionalized Ti2C MXene as high-performance adsorbent for strontium ions: a first-principles study

N-Functionalized Ti2C MXene As a High-Performance Adsorbent for Strontium Ions: A First-Principles Study

Cesium and Strontium Uptake Utilizing a New Ternary Solid-State Supramolecular Adsorbent under a Framework of Group Partitioning

Thorium(IV) Adsorption Onto Multilayered Ti3C2Tx MXene: a Batch, X-ray Diffraction and EXAFS Combined Study.

Rational Control of the Interlayer Space Inside Two-Dimensional Titanium Carbides for Highly Efficient Uranium Removal and Imprisonment

Effective radioactive strontium removal using lithium titanate decorated Ti3C2Tx MXene/polyacrylonitrile beads

Modification of Ti3C2Tx nanostructure with KH2PO4 and chitosan for effective removal of strontium from nuclear waste

Two-dimensional Titanium Carbide MXene Produced by Ternary Cations Intercalation Via Structural Control with Angstrom-Level Precision

Sorption of Eu(III) on MXene-derived Titanate Structures: the Effect of Nano-Confined Space

Synthesis and Evaluation of Peptide–Manganese Dioxide Nanocomposites as Adsorbents for the Removal of Strontium Ions

Enhanced adsorption of radioactive cesium from nuclear wastewater using ZIF-67 laminated 2D MXene Ti 3 C 2

Uranium Adsorption on Two-Dimensional Irradiation Resistant MXenes from First-Principles Calculations

Fe3O4-Decorated MXene for Effective Removal of 133Ba and 137Cs: Synthesis, Characterization, and Optimization via Response Surface Methodology (RSM)

The adsorption performance and mechanism of sulfonamides antibiotics into Ti3C2 MXene

Atomic-scale recognition of surface structure and intercalation mechanism of Ti3C2X.

A Novel Two-Dimensional Accordion-Like Titanium Carbide (mxene) for Adsorption of Cr(VI) from Aqueous Solution

Nanostructured chitosan/molecular sieve-4A an emergent material for the synergistic adsorption of radioactive major pollutants cesium and strontium

Effective removal of U(VI) and Eu(III) by carboxyl functionalized MXene nanosheets

Efficient Thorium(iv) Removal by Two-Dimensional Ti2CTx MXene from Aqueous Solution

Enhanced Uranium Adsorption Performance of Porous MXene Nanosheets

High Adsorption Capacity of Heavy Metals on Two-Dimensional Mxenes: an Ab Initio Study with Molecular Dynamics Simulation