Non-convexity of extremal length

Nathaniel Sagman

2023-10-13

Abstract:With respect to every Riemannian metric, the Teichmüller metric, and the Thurston metric on Teichmüller space, we show that there exist measured foliations on surfaces whose extremal length functions are not convex. The construction uses harmonic maps to $\mathbb{R}$-trees and minimal surfaces in $\mathbb{R}^n.$

Geometric Topology

What problem does this paper attempt to address?

CMC foliations of closed manifolds

William H. Meeks III,Joaquin Perez

DOI: https://doi.org/10.48550/arXiv.1404.1725

2015-04-09

Abstract:We prove that every closed, smooth $n$-manifold $X$ admits a Riemannian metric together with a smooth, transversely oriented CMC foliation if and only if its Euler characteristic is zero, where by CMC foliation we mean a codimension-one, transversely oriented foliation with leaves of constant mean curvature and where the value of the constant mean curvature can vary from leaf to leaf. Furthermore, we prove that this CMC foliation of $X$ can be chosen so that the constant values of the mean curvatures of its leaves change sign. We also prove a general structure theorem for any such non-minimal CMC foliation of $X$ that describes relationships between the geometry and topology of the leaves, including the property that there exist compact leaves for every attained value of the mean curvature.

Differential Geometry
The Riemannian Geometry of Superminimal Surfaces in Complex Space Forms

Shen Yibing

DOI: https://doi.org/10.1007/bf02106984

1996-01-01

Acta Mathematica Sinica English Series

Abstract:This paper deals with superminimal surfaces in complex space forms by using theFrenet framing. We formulate explicitly the length squares of the higher fundamental forms andthe higher curvatures for superminimal surfaces in terms of the metric of the surface and the Khlerangle of the immersion. Particularly, some curvature pinching theorems for minimal 2-spheres in acomplex projective space are given and a new characterization of the Veronese sequence is obtained.
On Positive Scalar Curvature and Moduli of Curves

Kefeng Liu,Yunhui Wu

DOI: https://doi.org/10.4310/jdg/1549422104

2019-01-01

Journal of Differential Geometry

Abstract:In this article we first show that any finite cover of the moduli space of closed Riemann surfaces of genus $g$ with $g\geq 2$ does not admit any Riemannian metric $ds^2$ of nonnegative scalar curvature such that $ds^2 \succ ds_{T}^2$ where $ds_{T}^2$ is the Teichm\"uller metric. Our second result is the proof that any cover $M$ of the moduli space $\mathbb{M}_{g}$ of a closed Riemann surface $S_{g}$ does not admit any complete Riemannian metric of uniformly positive scalar curvature in the quasi-isometry class of the Teichm\"uller metric, which implies a conjecture of Farb-Weinberger.
Extremal length and duality

Kai Rajala

2024-08-22

Abstract:Classical extremal length (or conformal modulus) is a conformal invariant involving families of paths on the Riemann sphere. In ``Extremal length and functional completion'', Fuglede initiated an abstract theory of extremal length which has since been widely applied. Concentrating on duality properties and applications to quasiconformal analysis, we demonstrate the flexibility of the theory and present recent advances in three different settings: Extremal length and uniformization of metric surfaces, Extremal length of families of surfaces and quasiconformal maps between $n$-dimensional spaces, and Schramm's transboundary extremal length and conformal maps between multiply connected plane domains.

Complex Variables,Functional Analysis
Conformal surface embeddings and extremal length

Jeremy Kahn,Kevin M. Pilgrim,Dylan P. Thurston

DOI: https://doi.org/10.1017/fms.2019.4

2020-03-29

Abstract:Given two Riemann surfaces with boundary and a homotopy class of topological embeddings between them, there is a conformal embedding in the homotopy class if and only if the extremal length of every simple multi-curve is decreased under the embedding. Furthermore, the homotopy class has a conformal embedding that misses an open disk if and only if extremal lengths are decreased by a definite ratio. This ratio remains bounded away from one under covers.

Complex Variables
Geodesic Length Functions and Teichmüller Spaces

F Luo

DOI: https://doi.org/10.4310/jdg/1214460797

1998-01-01

Journal of Differential Geometry

Abstract:Given a compact orientable surface with finitely many punctures Sigma, let S(Sigma) be the set of isotopy classes of essential unoriented simple closed curves in Sigma. We determine a complete set of relations for a function from S(Sigma) to R to be the geodesic length function of a hyperbolic metric with geodesic boundary and cusp ends on Sigma. As a consequence, the Teichmuller space of hyperbolic metrics with geodesic boundary and cusp ends on Sigma is reconstructed explicitly from an intrinsic (QP(1), PSL(2, Z)) structure on S(Sigma).
Extremal metrics for the eigenvalues of the Laplacian on manifolds with boundary

Eduardo Longa

2024-05-05

Abstract:We show there are no extremal metrics for the eigenvalues of the Neumann Laplacian on any compact manifold. Nonetheless, we construct examples of conformally extremal metrics for the eigenvalues of this operator in any annulus and characterise these special metrics in the general case of a compact manifold of dimension $n \geq 2$. As for the Dirichlet Laplacian, we prove non existence of extremal metrics on any compact surface.

Differential Geometry,Analysis of PDEs
Minimal surfaces and their role in differential geometry

Shing-Tung Yau

1984-01-01

Abstract:Ever since geometry was developed in ancient times, lines of shortest length have always been used in studying global problems. In this century the work of Bonnet, Cartan, Hadamard, Cohn-Vossen, Busemann, Synge, Rauch, Klingenberg, Berger, Bott, Penrose, Hawking, Cheeger, Gromoll, Meyer, Gromov and others demonstrates how the properties of geodesics can be used to study the global topological structure of manifolds with suitable assumptions on the curvature. Most of this work depends on the study of the variational properties of the length of the geodesics that were involved in the problem. Usually the existence of the extremal geodesics is not difficult to prove. The role of the curvature appears in the second variational formula. Since a geodesic is one-dimensional, one needs to know the information of the curvature tensor along the two-dimensional planes which are tangential to the geodesic. As a result, one usually makes assumptions on the sectional curvature and the Ricci curvature of the manifold. If one wants to study parts of the curvature tensor which are much weaker than the Ricci curvature and the sectional curvature, geodesics do not seem to be adequate, and extremal objects of higher dimension are natural tools. A natural scalar invariant of the curvature tensor is the scalar curvature. The scalar curvature turns out to play an important role in general relativity also.Lichnerowicz [5] was the first person to find a topological obstruction to the existence of metrics with positive scalar curvature. He proved, via the index theorem of Atiyah and Singer, that such metrics do not exist on compact spin manifolds with non-zero^ 4 …
Extremality and rigidity for scalar curvature in dimension four

Renato G. Bettiol,McFeely Jackson Goodman

DOI: https://doi.org/10.1007/s00029-023-00892-5

2023-09-25

Abstract:Following Gromov, a Riemannian manifold is called area-extremal if any modification that increases scalar curvature must decrease the area of some tangent 2-plane. We prove that large classes of compact 4-manifolds, with or without boundary, with nonnegative sectional curvature are area-extremal. We also show that all regions of positive sectional curvature on 4-manifolds are locally area-extremal. These results are obtained analyzing sections in the kernel of a twisted Dirac operator constructed from pairs of metrics, and using the Finsler--Thorpe trick for sectional curvature bounds in dimension 4.

Differential Geometry
An extreme limit with nonnegative scalar

Christina Sormani,Wenchuan Tian,Changliang Wang

DOI: https://doi.org/10.1016/j.na.2023.113427

IF: 1.743

2024-02-01

Nonlinear Analysis

Abstract:In 2014, Gromov vaguely conjectured that a sequence of manifolds with nonnegative scalar curvature should have a subsequence which converges in some weak sense to a limit space with some generalized notion of nonnegative scalar curvature. The conjecture has been made precise at an IAS Emerging Topics meeting: requiring that the sequence be three dimensional with uniform upper bounds on diameter and volume, and a positive uniform lower bound on MinA, which is the minimum area of a closed minimal surface in the manifold. Here we present a sequence of warped product manifolds with warped circles over standard spheres, that have circular fibres over the poles whose length diverges to infinity, that satisfy the hypotheses of this IAS conjecture. We prove this sequence converges in the W 1 , p sense for p < 2 to an extreme limit space that has nonnegative scalar curvature in the distributional sense as defined by Lee-LeFloch and that the total distributional scalar curvature converges. This paper only requires expertise in smooth Riemannian Geometry, smooth minimal surfaces, and Sobolev Spaces. In a second paper, requiring expertise in metric geometry, the first two authors prove intrinsic flat and Gromov–Hausdorff convergence of our sequence to this extreme limit space and investigate its geometric properties.

mathematics, applied
Embedded Minimal Surfaces, Exotic Spheres, and Manifolds with Positive Ricci Curvature

W MEEKS,L SIMON,ST YAU

DOI: https://doi.org/10.2307/2007026

IF: 4.795

1982-01-01

Annals of Mathematics

Abstract:Let N be a three dimensional Riemannian manifold. Let E be a closed embedded surface in N. Then it is a question of basic interest to see whether one can deform : in its isotopy class to some canonical embedded surface. From the point of view of geometry, a natural canonical surface will be the extremal surface of some functional defined on the space of embedded surfaces. The simplest functional is the area functional. The extremal surface of the area functional is called the minimal surface. Such minimal surfaces were used extensively by Meeks-Yau [MY21 in studying group actions on three dimensional manifolds. In [MY2], the theory of minimal surfaces was used to simplify and strengthen the classical Dehn's lemma, loop theorem and the sphere theorem. In the setting there, one minimizes area among all immersed surfaces and proves that the extremal object is embedded. In this paper, we minimize area among all embedded surfaces isotopic to a fixed embedded surface. In the category of these surfaces, we prove a general existence theorem (Theorem 1). A particular consequence of this theorem is that for irreducible manifolds an embedded incompressible surface is isotopic to an embedded incompressible surface with minimal area. We also prove that there exists an embedded sphere of least area enclosing a fake cell, provided the complementary volume is not a standard ball, and provided there exists no embedded one-sided RP2. By making use of the last result, and a cutting and pasting argument, we are able to settle a well-known problem in the theory of three dimensional manifolds. We prove that the covering space of any irreducible orientable three dimensional manifold is irreducible. It is possible to exploit our existence theorem to study
The Riemann minimal examples

William H. Meeks,Joaquin Perez,William H. Meeks III

DOI: https://doi.org/10.48550/arXiv.1609.05660

2016-09-19

Differential Geometry

Abstract:Near the end of his life, Bernhard Riemann made the marvelous discovery of a 1-parameter family $R_{\lambda}$, $\lambda\in (0,\infty)$, of periodic properly embedded minimal surfaces in $\mathbb{R}^3$ with the property that every horizontal plane intersects each of his examples in either a circle or a straight line. Furthermore, as the parameter $\lambda\to 0$ his surfaces converge to a vertical catenoid and as $\lambda\to \infty$ his surfaces converge to a vertical helicoid. Since Riemann's minimal examples are topologically planar domains that are periodic with the fundamental domains for the associated $\mathbb{Z}$-action being diffeomorphic to a compact annulus punctured in a single point, then topologically each of these surfaces is diffeomorphic to the unique genus zero surface with two limit ends. Also he described his surfaces analytically in terms of elliptic functions on rectangular elliptic curves. This article exams Riemann's original proof of the classification of minimal surfaces foliated by circles and lines in parallel planes and presents a complete outline of the recent proof that every properly embedded minimal planar domain in $\mathbb{R}^3$ is either a Riemann minimal example, a catenoid, a helicoid or a plane.
On The Modulus Of Extremal Beltrami Coefficients

Guowu Yao,Yi Qi

DOI: https://doi.org/10.1215/kjm/1250281774

2006-01-01

Journal of Mathematics of Kyoto University

Abstract:Let R be a hyperbolic Riemann surface. Suppose the Teichmuller space T(R) of R is infinite-dimensional. Let mu be an extremal Beltrami coefficient on R and let [mu] be the point in T(R). In this note, it is shown that if mu is not uniquely extremal, then there exists an extremal Beltrarni coefficient v in [mu] with non-constant modulus. As an application, it follows, as is well known, that there exist infinitely many geodesics between [mu] and the base point [0] in T(R) if mu is non-uniquely extremal.
Limits of Convex Projective Surfaces and Finsler Metrics

Charles Reid

2023-09-19

Abstract:We show that for certain sequences escaping to infinity in the $\operatorname{SL}_3\mathbb{R}$ Hitchin component, growth rates of trace functions are described by natural Finsler metrics. More specifically, as the Labourie-Loftin cubic differential gets big, logarithms of trace functions are approximated by lengths in a Finsler metric which has triangular unit balls and is defined directly in terms of the cubic differential. This is equivalent to a conjecture of Loftin from 2006 which has recently been proven by Loftin, Tamburelli, and Wolf, though phrasing the result in terms of Finsler metrics is new and leads to stronger results with simpler proofs. From our perspective, the result is a corollary of a more local theorem which may have other applications. The key ingredient of the proof is another asymmetric Finsler metric, defined on any convex projective surface, recently defined by Danciger and Stecker, in which lengths of loops are logarithms of eigenvalues. We imitate work of Nie to show that, as the cubic differential gets big, Danciger and Stecker's metric converges to our Finsler metric with triangular unit balls. While Loftin, Tamburelli, and Wolf address cubic differential rays, our methods also address sequences of representations which are asymptotic to cubic differential rays, giving us more insight into natural compactifications of the moduli space of convex projective surfaces.

Differential Geometry,Dynamical Systems
Variation of geodesic length functions over Teichmüller space

Reynir Axelsson,Georg Schumacher

DOI: https://doi.org/10.48550/arXiv.1006.2966

2010-06-15

Complex Variables

Abstract:In a family of compact, canonically polarized, complex manifolds equipped with K\"ahler-Einstein metrics the first variation of the lengths of closed geodesics was previously shown in by the authors in [arXiv:0808.3741v2] to be the geodesic integral of the harmonic Kodaira-Spencer form. We compute the second variation. For one dimensional fibers we arrive at a formula that only depends upon the harmonic Beltrami differentials. As an application a new proof for the plurisubharmonicity of the geodesic length function and its logarithm (with new upper and lower estimates) follows, which also applies to the previously not known cases of Teichm\"uller spaces of weighted punctured Riemann surfaces, where the methods of Kleinian groups are not available.
Extremal rays of non-integral $L$-length

Carla Novelli

DOI: https://doi.org/10.48550/arXiv.1108.5276

2011-08-26

Abstract:Let $X$ be a smooth complex projective variety and let $L$ be a line bundle on it. We describe the structure of the pre-polarized manifold $(X,L)$ for non integral values of the invariant $\tau_L(R):=-K_X\cdot\Gamma/(L \cdot \Gamma)$, where $\Gamma$ is a minimal curve of an extremal ray $R:=\mathbb R_+[\Gamma]$ on $X$ such that $L \cdot R>0$.

Algebraic Geometry
An Extreme Limit with Nonnegative Scalar Curvature

Christina Sormani,Wenchuan Tian,Changliang Wang

2023-04-14

Abstract:In 2014, Gromov vaguely conjectured that a sequence of manifolds with nonnegative scalar curvature should have a subsequence which converges in some weak sense to a limit space with some generalized notion of nonnegative scalar curvature. The conjecture has been made precise at an IAS Emerging Topics meeting: requiring that the sequence be three dimensional with uniform upper bounds on diameter and volume, and a positive uniform lower bound on MinA, which is the minimum area of a closed minimal surface in the manifold. Here we present a sequence of warped product manifolds with warped circles over standard spheres, that have circular fibres over the poles whose length diverges to infinity, that satisfy the hypotheses of this IAS conjecture. We prove this sequence converges in the $W^{1,p}$ sense for $p<2$ to an extreme limit space that has nonnegative scalar curvature in the distributional sense as defined by Lee-LeFloch and that the total distributional scalar curvature converges. This paper only requires expertise in smooth Riemannian Geometry, smooth minimal surfaces, and Sobolev Spaces. In a second paper, requiring expertise in metric geometry, the first two authors prove intrinsic flat and Gromov-Hausdorff convergence of our sequence to this extreme limit space and investigate its geometric properties.

Differential Geometry
Extremal functions on moduli spaces and applications

Nikolaj Glazunov

2024-11-21

Abstract:We construct and study extremal functions, which are defined by distance functions of convex bodies. Such functions take values in the moduli spaces of geometric objects associated with these convex bodies. Examples of such functions are the homogeneous arithmetic minimum of a function in a lattice, the Hermite constant, and the critical determinant of a body. We define and investigate extremal functions that yield optimal packings of bodies, the best values of covering constants, and optimal solutions to Diophantine approximation problems.

Number Theory
Stability and largeness properties of minimal surfaces in higher codimension

Ailana Fraser,Richard Schoen

2023-03-14

Abstract:We consider stable minimal surfaces of genus 1 in Euclidean space and in Riemannian manifolds. Under the condition of covering stability (all finite covers are stable) we show that a genus 1 finite total curvature minimal surface in $\mathbb R^n$ lies in an even dimensional affine subspace and is holomorphic for some constant orthogonal complex structure. For stable minimal tori in Riemannian manifolds we give an explicit bound on the systole in terms of a positive lower bound on the isotropic curvature. As an application we estimate the systole of noncyclic abelian subgroups of the fundamental group of PIC manifolds. This gives a new proof of the result of [5] that the fundamental cannot contain a noncyclic free abelian subgroup. The proofs apply the structure theory of holomorphic vector bundles over genus 1 Riemann surfaces developed by M. Atiyah [2].

Differential Geometry
Non-ergodicity of the geodesic flow on Cantor tree surfaces

Michael Pandazis

2023-10-16

Abstract:A Riemann surface equipped with its conformal hyperbolic metric is parabolic if and only if the geodesic flow on its unit tangent bundle is ergodic. Let X be a Cantor tree or a blooming Cantor tree Riemann surface. Fix a geodesic pants decomposition of X and call the boundary geodesics in the decomposition cuffs. Basmajian, Hakobyan, and \vSarić proved that if the lengths of cuffs are rapidly converging to zero, then X is parabolic. More recently, \vSarić proved a slightly slower convergence of lengths of cuffs to zero implies X is not parabolic. In the paper, we interpolate between the two rates of convergence of the cuffs to zero and find that these surfaces are not parabolic, thus completing the picture.

Geometric Topology,Complex Variables

Non-convexity of extremal length

CMC foliations of closed manifolds

The Riemannian Geometry of Superminimal Surfaces in Complex Space Forms

On Positive Scalar Curvature and Moduli of Curves

Extremal length and duality

Conformal surface embeddings and extremal length

Geodesic Length Functions and Teichmüller Spaces

Extremal metrics for the eigenvalues of the Laplacian on manifolds with boundary

Minimal surfaces and their role in differential geometry

Extremality and rigidity for scalar curvature in dimension four

An extreme limit with nonnegative scalar

Embedded Minimal Surfaces, Exotic Spheres, and Manifolds with Positive Ricci Curvature

The Riemann minimal examples

On The Modulus Of Extremal Beltrami Coefficients

Limits of Convex Projective Surfaces and Finsler Metrics

Variation of geodesic length functions over Teichmüller space

Extremal rays of non-integral $L$-length

An Extreme Limit with Nonnegative Scalar Curvature

Extremal functions on moduli spaces and applications

Stability and largeness properties of minimal surfaces in higher codimension

Non-ergodicity of the geodesic flow on Cantor tree surfaces