Abstract:In this research, we are presenting a precise spectral adjustment procedure for light‐emitting diode (LED) and other multilight‐source solar simulators. Applying the procedure on an LED‐based solar simulator, we achieve excellent agreement in a measurement comparison conducted with Fraunhofer ISE CalLab, using a dual‐junction solar cell as test object. Solar simulators based on light‐emitting diodes (LEDs) usually consist of many spectrally different LEDs, which in sum produce a sun‐like spectrum. On the one hand, this results in the advantage of a high spectral tunability of these systems and on the other hand, however, also in the challenge of a high number of parameters which have to be set for the adjustment of a suitable simulator spectrum. Multijunction solar cells consisting of series‐connected subcells are very sensitive to spectral irradiance conditions, which are affecting the current and the fill factor of the device. A precise adjustment of the simulator spectrum based on the spectral responsivity of the subcells is therefore essential for accurate multijunction measurements. Therefore, the number of spectrally different light sources used should be at least as high as the number of subcells in the device under test. However, for the measurement of multijunction devices, the much higher number of spectrally different light sources in common LED solar simulators results in a plethora of different simulator spectra, potentially suitable for the measurement. Furthermore, the nonlinear intensity characteristics of the utilized LEDs as well as the distance‐dependent illumination uniformity of such solar simulators add complexity when aiming for a precise spectral adjustment. To tackle these challenges, a new spectral adjustment procedure which is based on a least square's solution algorithm and the definition of appropriate boundary conditions for the calculation of suitable simulator settings is introduced in this publication. Focusing on measurements carried out under constant illumination makes the presented method especially applicable for perovskite‐on‐silicon multijunction devices. Therefore, an adapted method for the determination of the solar simulator's spectral properties, considering thermal influences which are particularly relevant when carrying out continuous illumination measurements, is introduced in this work. The presented method is verified applying it on a Wavelabs SINUS 220 LED solar simulator by performing a measurement comparison on a multijunction solar cell with Fraunhofer ISE CalLab's well‐established multilight source solar simulator.

A LED-based Functional Light Source for the Characterization of Thin Film Solar Cells

Spectrum measurement for LED-based spectrum-tunable source

Light Management for Fullerene-Based Semitransparent Polymer Solar Cells with a Distributed Bragg Reflector

Development and Characterization of Solar Simulator for Solar Cells

A compact AAA-compatible multispectral solar simulator based on spherical cap chamber

Solar light selective-harvesting eco-friendly colloidal quantum dots for transparent luminescent solar concentrators

A Novel Solar Simulator Based on a Supercontinuum Laser for Solar Cell Device and Materials Characterization

LED-based solar simulator for terrestrial solar spectra and orientations

Inexpensive Current-Voltage System with Electronically-Controlled Resistance under Xenon Arc Light for Solar Cell Efficiency Measurements

Adjustable high-power-LED solar simulator with extended spectrum in UV region

Semiconductor Nanocrystals As Luminescent Down-Shifting Layers to Enhance the Efficiency of Thin-Film Cdte/Cds and Crystalline Si Solar Cells

A precise method for the spectral adjustment of LED and multi‐light source solar simulators

A simple solar simulator with highly stable controlled irradiance for solar panel characterization

Light-concentrated Solar Generator and Sensor Based on Flexible Thin-Film Thermoelectric Device

Unveiling the Potential of Cs3Sb2ClxI9‐x‐Based Solar Cells for Efficient Indoor Light Harvesting: Numerical Simulation

A Novel Light Source Design for Spectral Tuning in Biomedical Imaging

Realizing Sunlight-Induced Efficiently Dynamic Infrared Emissivity Modulation Based on Aluminum-Doped zinc Oxide Nanocrystals

Experimental Study on the Selection of Light Sources for Full Spectrum Solar Simulators

A novel solar simulator based on a super-continuum laser

Optimizing CBTSSe solar cells for indoor applications through numerical simulation

Design and Implementation of LED Solar Simulator