Abstract:Furfurylation is an effective and green method for wood or bamboo modification that can significantly improve its physical and mechanical properties and the resistance against biological deterioration and the attack of subterranean termites. To elucidate the effect of furfurylation on the physical and multiscale mechanical properties of bamboo, the conditions of the furfurylation process were modified to cause an independent variation of the physical and multiscale mechanical properties in differently-treated bamboo samples. This was achieved by impregnating bamboo samples with solutions containing 15%, 30%, 50%, or 70% furfuryl alcohol (FA) by either of the two impregnation processes, vacuum pressure (V-P) and soaking (S) impregnation, while applying different curing conditions (wet- or dry-curing). The physical properties we measured included the absorption rate, weight percent gain (WPG), swelling efficiency (SE), and anti-swelling efficiency (ASE); the macro-mechanical properties involved the modulus of rupture (MOR), the modulus of elasticity (MOE), parallel-to-grain compressive strength (CS), and tensile strength (TS); the micro-mechanical properties included the tensile strength of bamboo's vascular bundle and hardness and the indentation modulus of bamboo's fiber cell walls. Finally, the correlation between the different physical and mechanical properties of the modified bamboo samples was analyzed. The results indicate that V-P impregnation made bamboo more permissible for the penetration of FA, while wet-curing was more conducive to ensuring a high curing rate. The dimensional stability of the bamboo samples treated with a high FA concentration through V-P impregnation and of those furfurylated by the S-Wet process using either medium or high FA concentrations was significantly increased. However, the dimensional stability of the bamboo samples modified with either low or medium FA concentrations decreased in both dry and wet curing. In terms of mechanical strength, furfurylation had little effect on the macro- and micro-mechanical properties of bamboo and was slightly improved in comparison to untreated samples. The results also showed a positive correlation between the macro- and micro-mechanical strength of the modified bamboo samples and a significant negative correlation between the mechanical strength and ASE. In soaking impregnation, the WPG and ASE were positively correlated, while the WPG and CS were negatively correlated. Interestingly, the correlation between the mechanical properties and ASE was not significant. Finally, both V-P-Wet and S-Wet approaches can be recommended for bamboo furfurylation, the former being time-saving and having a high curing rate in FA resin while significantly improving the moisture absorption and mechanical strength of bamboo. The advantage of the latter process is simplicity, a high utilization rate of FA, and a significant improvement in the dimensional stability of bamboo.

Formation and migration of 5-hydroxymethylfurfural and furfural from food contact bamboo sticks during heating and their safety evaluation

The Influence of Impregnation Methods and Curing Conditions on the Physical and Multiscale Mechanical Properties of Furfurylated Bamboo

Chemical Contaminants from Food Contact Materials and Articles Made from or Containing Wood and Bamboo - a Review

Understanding the Health Implications of Furan and Its Derivatives in Thermally Processed Foods: Occurrence, Toxicology, and Mixture Analysis

Influence of different formulations on chlorpyrifos behavior and risk assessment in bamboo forest of China

A Review on Formation Mechanism, Determination and Safety Assessment of Furfural and 5-Hydroxymethylfurfural (HMF) in Foods

Advances in the Study of Fungicides in Bamboo and Wood Products for Food Contact

Advanced Research of Bamboo Leaf Flavonoids(ⅱ):Reducing and Protecting Mechanism of Bamboo Leaf Phenolic Chemicals from Acrylamideand Its Toxicity

Effects of Drying,Storage Conditions and Simulated Digestion on the Content of 5-Hydroxymethylfurfural in Dried Longan

Protective effect of a dietary flavonoid-rich antioxidant from bamboo leaves against internal exposure to acrylamide and glycidamide in humans

Study on Reduction of Acrylamide in Fried Bread Sticks by Addition of Antioxidant of Bamboo Leaves and Extract of Green Tea.

Simultaneous Determination of Fungicides in Wood and Bamboo Food-Contact Materials by High-Performance Liquid Chromatography–Tandem Mass Spectrometry (HPLC–MS/MS)

A Comprehensive Review of Furan in Foods: from Dietary Exposures and in Vivo Metabolism to Mitigation Measures.

Safety Evaluation of Polyphenol-Rich Extract from Bamboo Shavings

Formation Rules of Furfural and Hydroxymethylfurfural During Bamboo Hot-water Pre-extraction

Potential neurotoxicity of 5-hydroxymethylfurfural and its oligomers: widespread substances in carbohydrate-containing foods.

Effect of pH, temperature and heating time on the formation of furan from typical carbohydrates and ascorbic acid

Addition of Antioxidant from Bamboo Leaves As an Effective Way to Reduce the Formation of Acrylamide in Fried Chicken Wings.

Toxicology and Safety of Anti-Oxidant of Bamboo Leaves. Part 1: Acute and Subchronic Toxicity Studies on Anti-Oxidant of Bamboo Leaves

Effect of Ph, Temperature and Heating Time on the Formation of Furan in Sugar–glycine Model Systems

5-Hydroxymethylfurfural (HMF) formation, occurrence and potential health concerns: recent developments