Direct laser-written optomechanical membranes in fiber Fabry-Perot cavities

Lukas Tenbrake,Alexander Faßbender,Sebastian Hofferberth,Stefan Linden,Hannes Pfeifer
DOI: https://doi.org/10.1038/s41467-023-44490-7
IF: 16.6
2024-01-03
Nature Communications
Abstract:Abstract Integrated micro- and nanophotonic optomechanical experiments enable the manipulation of mechanical resonators on the single phonon level. Interfacing these structures requires elaborate techniques limited in tunability, flexibility, and scaling towards multi-mode systems. Here, we demonstrate a cavity optomechanical experiment using 3D-laser-written polymer membranes inside fiber Fabry-Perot cavities. Vacuum coupling rates of g 0 /2 π ≈ 30 kHz to the fundamental megahertz mechanical mode are reached. We observe optomechanical spring tuning of the mechanical resonator frequency by tens of kilohertz exceeding its linewidth at cryogenic temperatures. The direct fiber coupling, its scaling capabilities to coupled resonator systems, and the potential implementation of dissipation dilution structures and integration of electrodes make it a promising platform for fiber-tip integrated accelerometers, optomechanically tunable multi-mode mechanical systems, and directly fiber-coupled systems for microwave to optics conversion.
multidisciplinary sciences
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to realize the optomechanical membrane structure of direct laser writing in the fiber - Fabry - Perot cavity (FFPC) to overcome the challenges in the current implementation and addressing of multimodal optomechanical systems. Specifically, the author shows how to use 3D laser direct - writing technology to fabricate polymer membranes in the fiber - Fabry - Perot cavity, and in this way, realize a highly - sensitive fiber - integrated accelerometer, a tunable multimodal mechanical system, and a direct fiber - coupling system for microwave - to - optical conversion. ### Core problems of the paper: 1. **Implementation and addressing of multimodal optomechanical systems**: One of the main challenges in the current optomechanical field is how to implement and address multimodal optomechanical systems. Traditional techniques have limitations in terms of tunability, flexibility, and expansion to multimodal systems. 2. **Integrated optomechanical elements**: How to integrate optomechanical elements into different sensing applications, especially in applications with miniaturization and high - performance requirements. 3. **Optimization of material properties**: How to optimize the mechanical properties of 3D direct - laser - written (DLW) materials, especially their performance under low - temperature conditions. ### Solutions: - **3D laser direct - writing technology**: Use 3D laser direct - writing technology to fabricate polymer membranes in the fiber - Fabry - Perot cavity. This technology allows the free formation of three - dimensional structures on the sub - micrometer scale, thus achieving a highly - integrated and flexible design. - **High - sensitivity fiber - integrated accelerometer**: By optimizing the geometry and material properties of the membrane, a high - sensitivity fiber - integrated accelerometer can be realized. - **Tunable multimodal mechanical system**: By introducing multiple membranes in a single fiber - Fabry - Perot cavity, a tunable multimodal mechanical system can be realized, which helps to improve the optomechanical coupling strength. - **Microwave - to - optical conversion**: The direct fiber - coupling system can be used for efficient microwave - to - optical conversion, which is of great significance for quantum communication and sensing applications. ### Main experimental results: - **Optomechanical coupling strength**: A vacuum coupling rate as high as \( g_0 / 2\pi \approx 30 \text{ kHz} \) has been achieved, which is realized by optimizing the thickness and support height of the membrane. - **Optomechanical spring effect**: The optomechanical spring tuning of the mechanical resonator frequency has been observed, and the tuning range exceeds its linewidth and reaches tens of kilohertz. - **Low - temperature performance**: Under low - temperature conditions, the mechanical quality factor is significantly improved, from about 20 at room temperature to about 600 at low temperature, which provides a basis for future low - temperature optomechanical experiments. ### Potential applications: - **High - sensitivity accelerometer**: It can be used for high - precision motion detection and environmental monitoring. - **Multimodal mechanical system**: It can be used for complex vibration control and distributed sensing. - **Microwave - to - optical conversion**: It can be used for quantum communication and high - performance sensing systems. Through these studies, the author provides a promising platform for future applications in fiber - integrated optomechanical systems.