Abstract:In laser-induced breakdown spectroscopy (LIBS), a focused laser pulse is used to ablate material from a surface and form a laser plasma that excites the vaporized material. Geometric factors, such as the distance between the sample and the focusing lens and the method of collecting the plasma light, can greatly influence the analytical results. To obtain the best quantitative results, one must consider this geometry. Here we report the results of an investigation of the effect of sampling geometry on LIBS measurements. Diagnostics include time-resolved spectroscopy and temporally and spectrally resolved imaging using an acousto-optic tunable filter (AOTF). Parameters investigated include the type of lens (cylindrical or spherical) used to focus the laser pulse onto the sample, the focal length of the lens (75 or 150 mm), the lens-to-sample distance (LTSD), the angle-of-incidence of the laser pulse onto the sample, and the method used to collect the plasma light (lens or fiber-optic bundle). From these studies, it was found that atomic emission intensities, plasma temperature, and mass of ablated material depend strongly on the LTSD for both types of lenses. For laser pulse energies above the breakdown threshold for air, these quantities exhibit symmetric behavior about an LTSD approximately equal to the back focal length for cylindrical lenses and asymmetric behavior for spherical lenses. For pulse energies below the air breakdown threshold, results obtained for both lenses display symmetric behavior. Detection limits and measurement precision for the elements Be, Cr, Cu, Mn, Pb, and Sr, determined with the use of 14 certified reference soils and stream sediments, were found to be independent of the lens used. Time-resolved images of the laser plasma show that at times >5 μs after plasma formation a cloud of emitting atoms extends significantly beyond the centrally located, visibly white, intense plasma core present at early times (<0.3 μs). It was determined that, by collecting light from the edges of the emitting cloud, one can record spectra using an ungated detector (no time resolution) that resemble closely the spectra obtained from a gated detector providing time-resolved detection. This result has implications in the development of less expensive LIBS detection systems.

Temporally modulating laser pulses to stabilize LIBS measurement locations under large gas temperature gradients

Simultaneous measurements of fuel concentration and temperature in gas jets by laser induced breakdown spectroscopy

Effects of Gas Temperature on Equivalence Ratio Measurement in Premixed Methane–air Flame Using Laser-Induced Breakdown Spectroscopy

Improving signal stability and analysis accuracy in laser-induced breakdown spectroscopy by multi-directional collection

Influence of the Pressure and Temperature on Laser Induced Breakdown Spectroscopy for Gas Concentration Measurements

Effects of Laser Wavelength on Measurement of Trace Elements in Gas Using LIBS

Enhancement and Stabilization of Plasma Using Collinear Long-Short Double-Pulse Laser-Induced Breakdown Spectroscopy

On the Improvement of Signal Repeatability in Laser-Induced Air Plasmas

Flame-assisted plasma modulation to improve the raw signal quality for laser-induced breakdown spectroscopy

Measurement of Transient Temperature Using Laser-Induced Breakdown Spectroscopy (LIBS) with the Surface Temperature Effect

A Method for Time-Resolved Laser-Induced Breakdown Spectroscopy Measurement

Investigation of the self-absorption effect using time-resolved laser-induced breakdown spectroscopy.

Improvement of laser induced breakdown spectroscopy signal using gas mixture

Emission Characteristics of Laser-Induced Plasma Using Collinear Long and Short Dual-Pulse Laser-Induced Breakdown Spectroscopy (LIBS)

Lasers and Optics Interface Improved Measurement Characteristics of Elemental Compositions Using Laser-Induced Breakdown Spectroscopy

Dual-laser-induced Breakdown Thermometry Via Sound Speed Measurement：A New Procedure for Improved Spatiotemporal Resolution.

Self-absorption Reduction in Laser-Induced Breakdown Spectroscopy Using Laser-Stimulated Absorption

Shock Wave Confinement-Induced Plume Temperature Increase in Laser-Induced Breakdown Spectroscopy

Quantitative Analysis method of laser-induced breakdown spectroscopy based on temperature iterative correction of self-absorption effect

Investigation of the multi-elemental self-absorption mechanism and experimental optimization in laser-induced breakdown spectroscopy

Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy