Amorphous nano-silica from sugarcane bagasse ash – process optimization, characterization, and sustainability analysis

Vishnuvardhan Mamidi,Ranaprathap Katakojwala,S. Venkata Mohan
DOI: https://doi.org/10.1007/s13399-024-05548-8
IF: 4.05
2024-04-09
Biomass Conversion and Biorefinery
Abstract:Valorization of nano-silica from sugarcane bagasse ash (SCBA), a major by-product from the sugarcane processing industry, was studied using sequential alkali extraction and acid precipitation methods. Three acid pretreatments and acid precipitation, viz., HCl (NS-C), HNO 3 (NS-N), and H 2 SO 4 (NS-S), were used to optimize the process for maximum extraction of silica. In addition, alkali extraction was performed using 1 M NaOH before acid precipitation. Nano-silica recovery efficiency of 45–57% was observed for the three approaches, with NS-C exhibiting the highest recovery rate of 0.35 g/g. Field emission scanning electron microscopy (FE-SEM) depicted irregularly shaped NS particles due to agglomeration. Fourier transform infrared spectroscopy (FT-IR) confirmed the presence of functionalities with characteristic peaks of Si–O-Si asymmetrical stretching and bending vibration at 1072 cm −1 and 617 cm −1 , respectively. X-ray diffraction (XRD) demonstrated the amorphous nature of NS, with a surface area ranging from 192 (NS-N) to 473 m 2 /g (NS-C). Post-extraction showed a rise in carbon percentage and a decrease in oxygen fraction. NS-C resulted in a size of 3.96 nm and a specific surface area of 473.6 m 2 /g, which is suitable for a wide range of applications including pharmaceutical. From the life cycle assessment (LCA: ISO 14044), GWP (global warming potential) for NS-N resulted in higher CO 2 eq of 12.59 kg, followed by NS-C (12.4 CO 2 eq) and NS-S (7.51 CO 2 eq). Overall, this research was designed as a low-cost and sustainable process with minimal chemical and energy inputs, aligning with the principles of circular bio-economy.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?