Abstract:Loss of teeth can affect a person's appearance and functions such as eating and speaking. There is thus a need for prosthetic rehabilitation to improve quality of life. For many patients, a fixed dental restoration is preferred, and a common restoration is a porcelain-fused-to-metal bridge retained by teeth or implants. Metal-based restorations can potentially cause adverse reactions though, and this is cause for the search for alternative materials. All-ceramic materials are characterized by strong atomic bonds that make them reluctant to react with the environment, and thus unlikely to cause adverse reactions. All-ceramic materials have other attractive material properties and excellent aesthetic properties and have been successfully used in dentistry, mostly for smaller anterior restorations. Ceramics, however, do not withstand tensile forces as well as metals, and are susceptible to brittle fractures with the connector area being especially prone to fracture. More recently, a new type of ceramic material, based on zirconium dioxide, has been developed. Yttria-stabilized tetragonal zirconia polycrystal, Y-TZP, has a unique ability to resist crack propagation by being able to transform from one crystalline phase to another, and the resultant volume increase stops the crack and prevents it from propagating. This material has the potential to be used for larger restorations and in the molar area. Not enough information, however, is available on clinical follow-up of zirconia-based restorations, especially long-term, and information about all-ceramic restorations supported by implants is lacking. The aim of this thesis was to evaluate designs of zirconia-based restorations in relation to achieving increased fracture resistance and evaluate the clinical performance of implant-supported zirconia-based restorations. In paper I implant-supported all-ceramic fixed partial dentures of two different ceramic materials were compared; a zirconia-toughened alumina material (group 1) and a fully-sintered Y-TZP material (group 2). Eighteen patients were randomly divided between the two groups. At the one-year follow-up, all restorations were in function and no complete fractures were noted. However, fractures of the veneering material were noted. There was a significant difference between the two materials: 54% of the restorations in group 2 showed veneer fractures compared to 8% of the restorations in group 1. Paper IV is a five-year follow-up of the same patient groups. All restorations were still in function without complete fractures, but an increase in veneer fractures was noted: 69% of the restorations in group 2 showed veneer fractures compared to 17% in group 1. In paper II the fracture strength was evaluated for 4-unit Y-TZP fixed dental prosthesis frameworks with different connector dimensions: 2.0, 2.5, 3.0, 3.5 and 4.0 mm. The results showed a significant increase in load at fracture for each increase in connector diameter and recommendations for clinically relevant connector dimensions were suggested. In paper III implant-supported Y-TZP fixed full-arch mandibular dentures were evaluated. At the three-year follow-up all restorations were in function and no complete fractures were noted. However, fractures of the veneering material were noted in nine of the ten patients, affecting 34% of the units. In paper V the fracture strength of crowns with different types of Y-TZP core materials and different core design and different veneering materials was evaluated. The crowns were cemented onto tooth-like abutments, except for one group cemented onto implant-like titanium abutments. The results showed significantly higher loads at fracture and less severe veneer fractures for crowns with anatomically shaped cores compared to simple cores of even thickness. Crowns supported by implant-like titanium abutments showed significantly higher loads at fracture than did those supported by tooth-like abutments. The type of core-material and veneering material did not influence the results.

A photoelastic assessment of residual stresses in zirconia-veneer crowns

Residual stresses explaining clinical fractures of bilayer zirconia and lithium disilicate crowns: A VFEM study

Numeric simulation of occlusal interferences in molars restored with ultrathin occlusal veneers

Stress distribution around dental implants, generated by six different ceramic materials for unitary restoration: An experimental photoelastic study

Effects of the Mechanical Properties of Veneering Porcelain on Stress Distribution of Dental Zirconia Layered Structure: A Finite Element Model Study

Impact of thermal properties of veneering ceramics on the fracture load of layered Ce-TZP/A nanocomposite frameworks

Stress distribution on teeth restored with veneers using various incisal preparation designs: A 3D finite element analysis study

Influence of the Material on Stress Distribution in Aesthetic Monolitic Complete Dental Crowns

In Vitro Aging and Fracture Tests on Differently Veneered Partially Stabilized Zirconia Anterior Crowns

Effect of final temperature and heating rate on the mechanical and optical properties of a zirconia veneering ceramic

Effects of extreme cooling methods on mechanical properties and shear bond strength of bilayered porcelain/3Y-TZP specimens

Effect of rapid cooling on residual stress and surface fracture toughness of dental zirconia

Functionally graded bi-material interface for Porcelain Veneered Zirconia dental crowns: A study using viscoelastic finite element analysis

Nonlinear visco-elastic finite element analysis of porcelain veneers: a submodelling approach to strain and stress distributions in adhesive and resin cement

Microcomputed tomography evaluation of cement shrinkage under zirconia versus lithium disilicate veneers

Fatigue behavior and colorimetric differences of a porcelain-veneered zirconia: effect of quantity and position of specimens during firing

CAD-FEA modeling and fracture resistance of bilayer zirconia crowns manufactured by the rapid layer technology

An experimental study of flexural strength and hardness of zirconia and their relation to crown failure loads

[Stress in an implant-supported unitary fixed partial prosthesis with different materials in the first lower premolar through finite elements]

Randomized clinical trial of zirconia laminate veneers sintered by using conventional versus speed process: 1-year follow-up

Zirconium dioxide based dental restorations. Studies on clinical performance and fracture behaviour