Surface stress sensor based on MEMS Fabry–Perot interferometer with high wavelength selectivity for label-free biosensing
Toshiaki Takahashi,Takeshi Hizawa,Nobuo Misawa,Miki Taki,Kazuaki Sawada,Kazuhiro Takahashi
DOI: https://doi.org/10.1088/1361-6439/aaaa80
2018-02-27
Journal of Micromechanics and Microengineering
Abstract:We have developed a surface stress sensor based on a microelectromechanical Fabry–Perot interferometer with high wavelength selectivity by using Au half-mirrors, for highly sensitive label-free biosensing. When the target molecule is adsorbed by the antigen–antibody reaction onto a movable membrane with a thin Au film, which acts as an upper mirror of the optical interferometer, the amount of deflection of the movable membrane deflected by the change in surface stress can be detected with high sensitivity. To improve the signal at the small membrane deflection region of this biosensor resulting in detection of low concentration molecules, by integrating 50 nm-thick Au half-mirrors, the wavelength selectivity of the optical interferometer has been successfully improved 6.6 times. Furthermore, the peak shift in the reflection spectrum due to the adsorption of bovine serum albumin (BSA) antigen with a concentration of 10 ng ml−l by the antigen–antibody reaction was spectroscopically measured on the fabricated optical interferometer, and the deflection amount of the movable membrane after 10 min treatment was 2.4 times larger than that of nonspecific adsorption with the avidin molecules. This result indicated that the proposed sensor can be used for selective detection of low-concentration target antigen molecules.
engineering, electrical & electronic,nanoscience & nanotechnology,instruments & instrumentation,physics, applied