Abstract:Next generation lithium-ion batteries (LIB) with high energy density and high power density have recently become of great interest for electric vehicle and portable devices. With the further upgrade of especially electric vehicles, the next generation LIB with high power and high energy density is urgently required. For this purpose, composite electrode consisting of commercially available graphite active material mixed with silicon nanoparticles is under current development. The main objectives are a significant increase of the practical capacity and energy density of commercial anodes, an overcome of the drawbacks of pure silicon due to large volume changes during electrochemical cycling, and the development of a technology suitable for mass production. In order to reduce the intrinsic mechanical stress of silicon/graphite electrodes and to improve the lithium-ion transport kinetic, free-standing electrode structures were generated by applying ultrafast industrial capable laser material processing. This advanced laser technology is demonstrated to be a flexible and powerful tool for pushing silicon/graphite (Si/C) composite anode materials beyond state of the art electrodes towards application. The electrochemical properties of cells with unstructured and structured electrodes were systematically analyzed by means of cyclic voltammetry, galvanostatic measurements, and electrochemical impedance spectroscopy. The increased active surface enables a significant improvement of lithium-ion diffusion kinetics. Furthermore, it is expected that the increased active surface will also provide additional artificial porosity for active material expansion, which in turn will reduce the mechanical stress within the electrodes during lithiation or delithiation. In this context, in-situ scanning electron microscopy (SEM) was performed in order to analyze the active material volume changes during charging and discharging. A main engineering challenge was to optimize the electrode architecture such as the pitch distance of free-standing structures regarding an enhanced electrochemical performance and a reduced material loss. Furthermore, an alumina (Al2O3) layer with a thickness of 5 nm, which acts as an artificial SEI, was coated on structured silicon/graphite electrodes by applying Atomic Layer Deposition (ALD). Cyclic voltammetry measurements were subsequently performed in order to investigate the fundamental properties of cells with structured and Al2O3- coated silicon/graphite electrodes. Galvanostatic measurements reveal that the cells with structured electrodes exhibit excellent electrochemical properties, i.e., a significantly improved capacity retention. ALD layers can contribute to further improvement of cycle stability and cell lifetime. In addition, advanced full cells with Lithium Nickel Manganese Cobalt Oxide NMC622 as cathode and Si/C as counter electrode were assembled and the electrochemical data will be presented.

Multi-material and parameter-controllable stereolithography 3D printing of graded permittivity composites for high voltage insulators

Simulation Design and 3D-Printing Fabrication of Conductivity Graded Insulator

Enhanced Field-Dependent Conductivity and Material Properties of Nano-Aln/micro-sic/silicone Elastomer Hybrid Composites for Electric Stress Mitigation in High-Voltage Power Modules

Integrated Manufacturing and Performance Study of Continuous Functionally Graded Materials-Structures Based on Multi-Material 3D Printing and Constraint Sacrifice Layer

3D printing fabrication of conductivity non-uniform insulator for surface flashover mitigation

Analysis Of Morphology And Electrical Insulation Of 3d Printing Parts

Grading of electric field distribution of AC polymeric outdoor insulators using field grading material

Surface Insulation Performance of 3D Printed Functionally Graded Insulator Fabricated by Active-Mixing Fused Deposition Modeling (AM-FDM)

Topology optimization and 3D-printing fabrication feasibility of high voltage FGM insulator

(Invited) Manufacturing and Characterization of Advanced High Energy Silicon/Graphite Electrodes

3D Printing and Flashover Voltage Test of Polypropylene-based Dielectric Functionally Graded Insulator

Numerical Optimization and 3D-Printing Fabrication Concept of High Voltage FGM Insulator

Progress of Theory and Parameter Adjustment for Nonlinear Resistive Field Grading Materials

Functionally Graded Insulator with Periodical Lattice Structures Enabling High Insulation and Mechanical Strength

Construction of Permittivity-Graded Insulator Using Topology-Optimized Lattice Structure

Optimization of Carbon Nanotube Doping on Nonlinear Conductivity, Surface Charge Dissipation and Electric Field Regulation of SiC/SR Composites Insulators Subjected to DC High Voltages

Structural Design and Simulation of PDMS/SiC Functionally Graded Substrates for Applications in Flexible Hybrid Electronics

Globally Reinforced Mechanical, Electrical, and Thermal Properties of Nonlinear Conductivity Composites by Surface Treatment of Varistor Microspheres

3D printing of polycaprolactone-based composites with diversely tunable mechanical gradients via multi-material fused deposition modeling

Dielectric Properties and 3D-Printing Feasibility of UV-Curable Resin/Micron Ceramic Filler Composites

Parameter Design of Functionally Graded Materials for Tri-Post Insulator in HVDC GIL under Stationary and Transient Conditions