Abstract:Neutronic, thermal-hydraulics, and solid mechanics computations were used to study the different VVER-1000 reactors' operational conditions for the steady-state and the transient state. The main objective of these studies is to investigate the safe operating conditions, which is essential in determining the reactor safety limits. The coupling between different physics enables a better understanding of reactor phenomena and enhanced accuracy by reducing the assumption needed for separate calculations for different physics. MCNPX code is used to provide the source power distribution for two themes of calculations. The first theme is the analytical solution using MATLAB software, and the second theme is the finite element coupled physics using COMSOL Multiphysics. Analytical solutions using MATLAB software and results from COMSOL-Multiphysics were used to simulate the uncoupled analytical models and coupled models, respectively. The coupled theme provide feedbacks between different physics by iterating the solution between different physics; such as solving the heat transfer with taking into consideration the variation of the coolant velocity along the coolant channel and solving solid mechanics with taking into consideration the change of either the fuel and the clad temperatures distribution (thermal load) or the change in the coolant pressure (pressure load). While in the uncoupled solutions, certain assumptions reflect an average behavior for the effect of other physics on the physics under concern, such as the average pressure of the coolant and the average value for the coolant velocity. The obtained results are verified by comparing it to WIMS D-4 for neutronic calculations and COPERA-EN code for the thermal-hydraulic analytical solution. Also, thermal-hydraulic results by both coupled and uncoupled themes are verified against results from the final safety analysis report. The Departure from Nucleate Boiling Ratio (DNBR) and the Minimum Departure from Nucleate Boiling Ratio (MDNBR) were applied for the investigation of VVER-1000 reactor safety parameters. Solid mechanics, fluid dynamics and heat transfer were used to compute the maximum stress/maximum volumetric strain acting on both fuel and cladding material. Results from both methods satisfied the limits addressed by the designer and shows a good agreement with the other published works that used WIMS D-4 for neutronic calculations and COBRA-EN code for thermal-hydraulic calculations analytically. in addition, the maximum stress occurring on the fuel and clad materials didn't exceed the yield stress. Furthermore, the fuel material displacement didn't exceed the Helium gap thickness, which means the surface contact between the fuel and the clad material is impossible that prevents the chemical interaction between both fuel and clad at 1135 K.

Development of methods for thermo-hydraulic simulation of nuclear reactors and similar systems in normal working conditions and in transient processes

- 1-development and validation of high-precision cfd method with volume-tracking algorithm for gas-liquid two-phase flow simulation on unstructured mesh i 1

Enhanced Thermal Management in High-Temperature Applications: Design and Optimization of a Water-Cooled Forced Convection System in a Hollow Cuboid Vapour Chamber Using COMSOL and MATLAB

Investigation of Compressible Flow in Natural Circulation Loops with a Non-Boussinesq Algorithm

Thermo-Neutronics Coupled Simulation of a Heat Pipe Reactor Based on OpenMC/COMSOL

Direct Numerical Simulation of high Prandtl number fluids and supercritical carbon dioxide canonical flows using the spectral element method

Numerical and Experimental Investigations of the Static Characteristics of A Natural Circulation System at Nuclear Heating Reactor Conditions

Numerical Study of Flow and Heat Transfer Characteristics in a Simplified Dual Fluid Reactor

Thermal-hydraulic and solid mechanics safety analysis for VVER-1000 reactor using analytical and CFD approaches

Numerical Investigation on Heat Transfer Features of Gas-Cooled Open Lattice Reactor in Normal Operations

Numerical Investigation on the Thermal Stratification in a Pressurizer Surge Line

Investigation on Two-Phase Flow Stability in a Natural Circulation System / Untersuchung Der Stabilität Einer Zweiphasenströmung in Einem System Mit Naturumlauf

CFD Investigating Flow and Heat Transfer Characteristics in a Natural Circulation Loop

Thermal Hydraulic Modeling of a Natural Circulation Loop

Theoretical And Experimental Study On Natural Circulation Relevant To Nuclear Heating Reactor

Numerical Simulation of a Small High-Temperature Heat Pipe Cooled Reactor with CFD Methodology

Modeling of Forced Convection in Low-Prandtl-Number Fluids Using a Novel Local Algebraic Heat Flux Model

Numerical Simulation of Three Dimensional Internal Flow of A Pwr Reactor

Numerical and Theoretical Investigations of Heat Transfer Characteristics in Helium–Xenon Cooled Microreactor Core

COMPUTER SIMULATION OF THERMOPHYSICAL PROCESSES IN THE VVER-1000 NUCLEAR REACTOR

Development of multi-physics and multi-scale Best Effort Modelling of pressurized water reactor under accidental situations