Abstract:We study an integer automaton elasto-plastic model of an amorphous solid subject to cyclic shear of amplitude $\Gamma$. We focus on the reversible plastic regime at intermediate $\Gamma_0<\Gamma<\Gamma_y$, where, after a transient, the system settles into a periodic limit cycle with hysteretic, dissipative plastic events which repeat after an integer number of cycles. We study the plastic strain rate, $\frac{d\epsilon}{d\gamma}$, (where $\gamma$ is the applied strain and $\epsilon$ is the plastic strain) during the terminal limit cycles and show that it consists of a creeping regime at low $\gamma$ with very low $\frac{d\epsilon}{d\gamma}$ followed by a sharp transition at a characteristic strain, $\gamma_*$, and stress, $\sigma_*$, to a flowing regime with higher $\frac{d\epsilon}{d\gamma}$. We show that while increasing $\Gamma$ above $\Gamma_0$ results in lower terminal ground state energy, $U_{\text{min}}$, and a correspondingly narrower distribution of stresses, it, surprisingly, results in lower $\gamma_*$, and $\sigma_*$. The stress distribution, $P(\sigma)$, also becomes skewed for $\Gamma>\Gamma_0$. That is, the systems in the RPR are anomalously soft and mechanically polarized. We relate this to an emergent characteristic feature in the stress distribution, $P(\sigma)$, at a value, $\sigma_0$, which is independent of $\Gamma$ and show that $\sigma_0$ implies a relation between the $\Gamma$ dependence of $\sigma_*$, $\gamma_*$, and the amplitude of plastic strain, $\epsilon_p$. We show that the onset of hysteresis is characterized by a power-law scaling, indicative of a second order transition with $\epsilon_p\propto (\Gamma-\Gamma_0)^{1.2\pm0.1}$. We argue that $\sigma_0$ and, correspondingly, the onset of the RPR at $\Gamma=\Gamma_0$, is simply set by the so-called Eshelby-stress. Furthermore, we show that cycling at $\Gamma_0$ results in a maximally hardened state.

What problem does this paper attempt to address?

This paper studies the abnormally soft properties of amorphous substances within the Reversible Plastic Regime (RPR). Specifically, the author conducts research on amorphous solids subjected to cyclic shear stress through an integer automaton elasto - plastic model. The focus of the research is on how the system enters a periodic limit cycle in the case of intermediate shear amplitudes $\Gamma_0 < \Gamma < \Gamma_y$, which contains hysteretic, dissipative plastic events, and these events repeat precisely after a certain number of cycles. ### Main Findings: 1. **Change in Plastic Strain Rate**: The author studies the plastic strain rate $\frac{d\epsilon}{d\gamma}$ in the terminal limit cycle and finds that it is in a creep state at low shear strain $\gamma$, with a very low $\frac{d\epsilon}{d\gamma}$. As $\gamma$ increases to a characteristic value $\gamma^*$, the plastic strain rate suddenly jumps to a higher value, entering the flow state. 2. **Characteristic Strain and Stress**: Increasing the shear amplitude $\Gamma$ beyond $\Gamma_0$ causes the terminal ground - state energy $U_{\text{min}}$ to decrease and the stress distribution to narrow, but surprisingly, the characteristic strain $\gamma^*$ and characteristic stress $\sigma^*$ instead decrease. This indicates that the system becomes abnormally soft and mechanically polarized within the RPR region. 3. **Characteristics of Stress Distribution**: The author discovers a characteristic stress $\sigma_0$ independent of $\Gamma$ in the stress distribution $P(\sigma)$ and explains the relationship between $\sigma_0$ and $\Gamma$-dependent $\sigma^*$, $\gamma^*$ and plastic strain amplitude $\epsilon_p$. 4. **Power - Law Scaling**: The author shows that the starting point of the hysteresis phenomenon can be described by power - law scaling, i.e., $\epsilon_p\propto(\Gamma - \Gamma_0)^{1.2\pm0.1}$, indicating that this is a second - order phase transition. 5. **Eshelby Stress**: The author further explains that $\sigma_0$ and the starting point of RPR $\Gamma=\Gamma_0$ are determined by the so - called Eshelby stress, which is the stress at which the local shear transformation zone is after plastic deformation. ### Conclusion: This paper reveals the abnormally soft properties of amorphous substances within the RPR region and provides a detailed explanation through theoretical models and experimental data. These findings are of great significance for understanding the cyclic yielding behavior of amorphous materials and developing relevant mean - field descriptions, and also provide new research directions for experiments and particle - based simulations.

Anomalous softness in amorphous matter in the reversible plastic regime

A Finite Deformation Fractional Viscoplastic Model for the Glass Transition Behavior of Amorphous Polymers

Physically-based Interpretation of Abnormal Stress Relaxation Response in Glassy Polymers

Soft modes and strain redistribution in continuous models of amorphous plasticity: the Eshelby paradigm, and beyond?

Mean-field description of plastic flow in amorphous solids

Quantification of plasticity via particle dynamics above and below yield in a 2D jammed suspension

Percolating Plastic Failure as a Mechanism for Shear Softening in Amorphous Solids

Elasto-plastic models of the yielding transition with stress-dependent transition rates

Structure-property relationships from universal signatures of plasticity in disordered solids

Modeling the Rate-Dependent Ductile-Brittle Transition in Amorphous Polymers

Overlapping plastic events as a mechanism for irreversible dynamics in amorphous solids under oscillatory shear

Scaling of relaxation and excess entropy in plastically deformed amorphous solids

Signatures of the spatial extent of plastic events in the yielding transition in amorphous solids

Recoverable strain from reverse plasticity

Criticality in elastoplastic models of amorphous solids with stress-dependent yielding rates

Elastic-gap free formulation in strain gradient plasticity theory

Long-range angular correlations of particle displacements at a plastic-to-elastic transition in jammed amorphous solids

Plastic strain is a mixture of avalanches and quasi-reversible deformations: Study of various sizes

Deformation Patterns and Surface Morphology in a Minimal Model of Amorphous Plasticity

Slow Fatigue and Highly Delayed Yielding via Shear Banding in Oscillatory Shear