Abstract:With a view to understanding ignition and combustion behaviours in diesel engines, this study investigates several aspects of ignition and combustion of an n-dodecane spray in a high pressure, high temperature chamber, known as Spray A, using data resulting from modelling using the transported probability density function (TPDF) method. The model has been validated comprehensively with good to excellent agreement in our previous work against all available experimental data including for mixture-fraction and velocity fields in non-reacting cases, and flame lift-off length and ignition delay in reacting cases. This good agreement encourages further investigation of the numerical model results to help understand the structure of this flame, which serves to complement the experimental information that is available, which is very limited due to the difficult experimental conditions in which this flame exists. For example, quantitative experimental measurements of local mixture-fraction, temperature, velocity gradients, etc. are not yet possible in reacting cases. Analysis of the model results shows that two-stage ignition is found to occur across the ambient temperature conditions considered: the first stage is rapidly initiated on the lean side where temperatures are high and sequentially moves to richer, cooler conditions. The first stage is extremely resilient to turbulence, occurring in a region of very low Damköhler number. The second stage of ignition occurs first in rich mixtures in a region behind the head of the fuel jet where mixture gradients are low, and appears to be influenced strongly by turbulence. Relative to a homogeneous reactor, it is delayed on the lean side but advanced on the rich side, suggesting entrainment and mixing from the early igniting lean regions into richer mixtures is an important moderator of the ignition process. The second-stage ignition front propagates at very high velocities initially, suggesting it is a sequential ignition moving according to gradients of ignition delay and/or residence time. The flame stabilises however on the lean side in a region of much lower velocity, where turbulent velocity fluctuations are sufficiently high such that turbulent transport influences the propagation. It stabilises in a region of low Damköhler number which implies that a competition of chemistry versus micro-mixing might also be involved in stabilisation. The stabilisation mechanism is investigated by an analysis of the transport budgets, showing the flame is stabilised by autoignition but moderated by turbulent diffusion. Further analysis of the flame index supports this stabilisation mechanism, and demonstrates the simultaneous existence of non-premixed and premixed combustion modes in the same flame. Analysis of the flow fields also reveals that local entrainment and dilatation are important flow features near the flame base.

Physics-informed data-driven prediction of Jet A-1 spray characteristics using time-resolved flame chemiluminescence and sparse Mie scattering

Large Eddy Simulation/dynamic Thickened Flame Modeling of a High Karlovitz Number Turbulent Premixed Jet Flame

Direct Numerical Simulation of a Spatially Developing N-Dodecane Jet Flame under Spray A Thermochemical Conditions: Flame Structure and Stabilisation Mechanism

Detailed spray analysis of airblast atomization of various fuels in a reacting environment

Direct numerical simulation of three-dimensional swirling n-heptane spray flames

Experimental Characterization of Two-Phase Aerated Liquid Ethanol and Jet A Spray Flames

Characterization of diesel spray with novel high-speed laser absorption scattering technique under diesel engine-like condition

Spray Flame Characteristics of Bio-Derived Fuels in a Simulated Gas Turbine Burner

Evaporation Characterization Of Fuel Spray Impinging On A Flat Wall By Laser-Based Measurement

Effects of Spray and Turbulence Modelling on the Mixing and Combustion Characteristics of an N -Heptane Spray Flame Simulated with Dynamic Adaptive Chemistry

LES of a Turbulent Lifted Methanol Spray Flame Using a Novel Spray Flamelet/progress Variable Model

A spray flamelet/progress variable approach combined with a transported joint PDF model for turbulent spray flames

Quantitative mixing measurements and stochastic variability of a vaporizing gasoline direct-injection spray

Quantitative Measurement of the Sauter Mean Diameter in Dense Fuel Sprays Using Simultaneous Planar-Laser-Induced-Fluorescence/Mie-Scattering Technique

An Analysis of the Structure of an N-Dodecane Spray Flame Using TPDF Modelling

Modelling Spray Performance of Alternative Aviation Fuel

Spatially-resolved soot evolution and statistics in high-pressure diesel spray flames using two-color pyrometry

IMAGING OF VAPOR/LIQUID DISTRIBUTIONS OF SPLIT-INJECTED DIESEL SPRAYS IN A TWO-DIMENSIONAL MODEL COMBUSTION CHAMBER

Quantitative Characterization of Near-Field Fuel Sprays by Multi-Orifice Direct Injection Using Ultrafast X-Tomography Technique

Spray Flames Simulation Using A Two Phase Combustion Model with Single Droplet Combustion Mode

K-1920 Simultaneous Measurement of Vapor and Liquid Phase Concentration Distributions in a D.I. Diesel Spray by Laser Absorption Scattering Technique