Three-manifolds with bounded curvature and uniformly positive scalar curvature

Conghan Dong

DOI: https://doi.org/10.48550/arXiv.2210.14442

2023-02-24

Abstract:In this note, we prove that for a complete noncompact three dimensional Riemannian manifold with bounded sectional curvature, if it has uniformly positive scalar curvature, then there is a uniform lower bound on the injectivity radius.

Differential Geometry

What problem does this paper attempt to address?

On Positive Scalar Curvature and Moduli of Curves

Kefeng Liu,Yunhui Wu

DOI: https://doi.org/10.4310/jdg/1549422104

2019-01-01

Journal of Differential Geometry

Abstract:In this article we first show that any finite cover of the moduli space of closed Riemann surfaces of genus $g$ with $g\geq 2$ does not admit any Riemannian metric $ds^2$ of nonnegative scalar curvature such that $ds^2 \succ ds_{T}^2$ where $ds_{T}^2$ is the Teichm\"uller metric. Our second result is the proof that any cover $M$ of the moduli space $\mathbb{M}_{g}$ of a closed Riemann surface $S_{g}$ does not admit any complete Riemannian metric of uniformly positive scalar curvature in the quasi-isometry class of the Teichm\"uller metric, which implies a conjecture of Farb-Weinberger.
Lower bound for L<sup>n/2</sup> curvature norm and its application

Katsuhiro Shiohama,Hongwei Xu

DOI: https://doi.org/10.1007/BF02921626

1997-01-01

Journal of Geometric Analysis

Abstract:We control the number of critical points of a height function arising from the Nash isometric embedding of a compact Riemanniann-manifoldM. The Ln/2 curvature norm ∥R∥ and a similar scalar ∥R∥ are introduced and their integralR(M) andR(M) overM. We prove thatR(M) is bounded below by a constant depending only onn and the Betti numbers ofM. Thus a new sphere theorem is proved by eliminating allith Betti numbers fori = 1, .…n −1. The emphasis is that our sphere theorem imposes no restriction on the range of curvature.
Lower bound for L n/2 curvature norm and its application

Katsuhiro Shiohama,Hongwei Xu

DOI: https://doi.org/10.1007/BF02921626

1997-01-01

Abstract:We control the number of critical points of a height function arising from the Nash isometric embedding of a compact Riemannian n -manifold M . The L n/2 curvature norm ∥ R ∥ and a similar scalar ∥ R ∥ are introduced and their integral R(M) and R(M) over M . We prove that R(M) is bounded below by a constant depending only on n and the Betti numbers of M . Thus a new sphere theorem is proved by eliminating all i th Betti numbers for i = 1, .… n −1. The emphasis is that our sphere theorem imposes no restriction on the range of curvature.
A sharp scalar curvature inequality for submanifolds

H. A. Gururaja

2025-01-02

Abstract:Let $M^n, n\geq 3,$ be a complete Riemannian manifold of constant scalar curvature $R$ and $f: M^n\rightarrow M^{n+k}(c)$ be an isometric immersion into a space form with flat normal bundle. Assume that $f$ admits a principal normal vector field which has multiplicity $n-1$ at each point of $M^n.$ Our first result is global and states that (i) $R\geq 0$ if $c=0;$\ (ii) $ R> (n-1)(n-2)c$ if $c> 0;$ and (iii) $R\geq n(n-1)c$ if $c< 0.$ These inequalities are optimal. Our second result states that if we further assume that the mean curvature field of $f$ is parallel, then the sectional curvature of $M^n$ is bounded below by $c.$ As a consequence, we classify submanifolds which satisfy the latter condition.

Differential Geometry
Complete Riemannian 4-manifolds with uniformly positive scalar curvature

Otis Chodosh,Davi Maximo,Anubhav Mukherjee

2024-07-08

Abstract:We obtain topological obstructions to the existence of a complete Riemannian metric with uniformly positive scalar curvature on certain (non-compact) $4$-manifolds. In particular, such a metric on the interior of a compact contractible $4$-manifold uniquely distinguishes the standard $4$-ball up to diffeomorphism among Mazur manifolds and up to homeomorphism in general. We additionally show there exist uncountably many exotic $\mathbb{R}^4$'s that do not admit such a metric and that any (non-compact) tame $4$-manifold has a smooth structure that does not admit such a metric.

Differential Geometry,Geometric Topology,Symplectic Geometry
Metric limits of manifolds with positive scalar curvature

Man-Chun Lee,Peter M. Topping

2024-11-18

Abstract:We show that any Riemannian metric conformal to the round metric on $S^n$, for $n\geq 4$, arises as a limit of a sequence of Riemannian metrics of positive scalar curvature on $S^n$ in the sense of uniform convergence of Riemannian distance. In particular, non-negativity of scalar curvature is not preserved under such limits.

Differential Geometry,Metric Geometry
Strengthened injectivity radius bounds for manifolds with positive scalar curvature

Thomas Richard

2024-10-23

Abstract:Green's inequality shows that a compact Riemannian manifold with scalar curvature at least $n(n-1)$ has injectivity radius at most $\pi$, and that equality is achieved only for the radius 1 sphere. In this work we show how extra topological assumptions can lead to stronger upper bounds. The topologies we consider are $\mathbb{S}^2\times\mathbb{T}^{n-k-2}\times\mathbb{R}^k$ for $n\leq 7$ and $0\leq k\leq 2$ and 3-manifolds with positive scalar curvature except lens spaces $L(p,q)$ with $p$ odd. We also prove a strengthened inequality for $3$-manifolds with positive scalar curvature and large diameter. Our proof uses previous results of Gromov and Zhu.

Differential Geometry
ON COMPACT 3-MANIFOLDS WITH NONNEGATIVE SCALAR CURVATURE WITH A CMC BOUNDARY COMPONENT

Pengzi Miao,Naqing Xie

DOI: https://doi.org/10.1090/tran/7500

IF: 1.3529

2018-01-01

Transactions of the American Mathematical Society

Abstract:We apply the Riemannian Penrose inequality and the Riemannian positive mass theorem to derive inequalities on the boundary of a class of compact Riemannian 3-manifolds with nonnegative scalar curvature. The boundary of such a manifold has a CMC component, i.e., a 2-sphere with positive constant mean curvature; and the rest of the boundary, if nonempty, consists of closed minimal surfaces. A key step in our proof is the construction of a collar extension that is inspired by the method of Mantoulidis-Schoen.
Complete 3-manifolds of positive scalar curvature with quadratic decay

Florent Balacheff,Teo Gil Moreno de Mora Sardà,Stéphane Sabourau

2024-07-10

Abstract:We prove that if an orientable 3-manifold $M$ admits a complete Riemannian metric whose scalar curvature is positive and has a subquadratic decay at infinity, then it decomposes as a (possibly infinite) connected sum of spherical manifolds and $\mathbb{S}^2 \times \mathbb{S}^1$ summands. This generalises a theorem of Gromov and Wang by using a different, more topological, approach. As a result, the manifold $M$ carries a complete Riemannian metric of uniformly positive scalar curvature, which partially answers a conjecture of Gromov. More generally, the topological decomposition holds without any scalar curvature assumption under a weaker condition on the filling discs of closed curves in the universal cover based on the notion of fill radius. Moreover, the decay rate of the scalar curvature is optimal in this decomposition theorem. Indeed, the manifold $\mathbb{R}^2 \times \mathbb{S}^1$ supports a complete metric of positive scalar curvature with exactly quadratic decay, but does not admit a decomposition as a connected sum.

Differential Geometry
Effective volume growth of three-manifolds with positive scalar curvature

Yipeng Wang

2024-05-06

Abstract:In this note, we prove an effective linear volume growth for complete three-manifolds with non-negative Ricci curvature and uniformly positive scalar curvature. This recovers the results obtained by Munteanu-Wang. Our method builds upon recent work by Chodosh-Li-Stryker, which utilizes the technique of $\mu$-bubbles and the almost-splitting theorem by Cheeger-Colding.

Differential Geometry,Metric Geometry
Three-manifolds with non-negatively pinched Ricci curvature

Man-Chun Lee,Peter M. Topping

2024-12-25

Abstract:We show that every complete non-compact three-manifold with non-negatively pinched Ricci curvature admits a complete Ricci flow solution for all positive time, with scale-invariant curvature decay and preservation of pinching. Combining with recent work of Lott and Deruelle-Schulze-Simon gives a proof of Hamilton's pinching conjecture without additional hypotheses.

Differential Geometry
Optimal asymptotic volume ratio for noncompact 3-manifolds with asymptotically nonnegative Ricci curvature and a uniformly positive scalar curvature lower bound

Xian-Tao Huang,Shuai Liu

2024-06-05

Abstract:In this paper, we study 3-dimensional complete non-compact Riemannian manifolds with asymptotically nonnegative Ricci curvature and a uniformly positive scalar curvature lower bound. Our main result is that, if this manifold has $k$ ends and finite first Betti number, then it has at most linear volume growth, and furthermore, if the negative part of Ricci curvature decays sufficiently fast at infinity, then we have an optimal asymptotic volume ratio $\limsup_{r\rightarrow\infty}\frac{\mathrm{Vol}(B(p, r))}{r}\leq4k\pi$. In particular, our results apply to 3-dimensional complete non-compact Riemannian manifolds with nonnegative Ricci curvature and a uniformly positive scalar curvature lower bound.

Differential Geometry
Normal scalar curvature and a pinching theorem in 𝕊^m × ℝ and ℍ m × ℝ

Qun Chen,Qing Cui

DOI: https://doi.org/10.1007/s11425-011-4221-x

2011-01-01

Science China Mathematics

Abstract:We obtain an inequality in 𝕊^m × ℝ and ℍ m × ℝ which is similar to DDVV conjecture. As an application, we show that a minimal submanifold in ℍ m × ℝ with nonnegative scalar curvature must be a surface of the type γ × ℝ, where γ is a geodesic in ℍ m . In addition, we get a pinching theorem in 𝕊^m × ℝ.
Geometry of three-dimensional manifolds with positive scalar curvature

Ovidiu Munteanu,Jiaping Wang

2024-06-05

Abstract:The purpose of this paper is to derive volume and other geometric information for three-dimensional complete manifolds with positive scalar curvature. In the case that the Ricci curvature is nonnegative, it is shown that the volume of the manifold must be of linear growth when the scalar curvature is bounded from below by a positive constant. This answers a question of Gromov in the affirmative for dimension three. Volume growth estimates are also obtained for the case when scalar curvature decays to zero. In fact, results of similar nature are established for the more general case that the Ricci curvature is asymptotically nonnegative.

Differential Geometry,Analysis of PDEs
Integral of Scalar Curvature on Non-parabolic Manifolds

Guoyi Xu

DOI: https://doi.org/10.1007/s12220-019-00174-7

2019-01-01

Journal of Geometric Analysis

Abstract:Using the monotonicity formulas of Colding and Minicozzi, we prove that on any complete, non-parabolic Riemannian manifold (M3,g) with non-negative Ricci curvature, the asymptotic- weighted scaling invariant integral of scalar curvature has an explicit bound in the form of asymptotic volume ratio.
On the Scalar Curvature Compactness Conjecture in the Conformal Case

Brian Allen,Wenchuan Tian,Changliang Wang

2024-06-06

Abstract:Is a sequence of Riemannian manifolds with positive scalar curvature, satisfying some conditions to keep the sequence reasonable, compact? What topology should one use for the convergence and what is the regularity of the limit space? In this paper we explore these questions by studying the case of a sequence of Riemannian manifolds which are conformal to the $n$-dimensional round sphere. We are able to show that the sequence of conformal factors are compact in several analytic senses and are able to establish $C^0$ convergence away from a singular set of small volume in a similar fashion as C. Dong. Under a bound on the total scalar curvature we are able to show that the limit conformal factor has weak positive scalar curvature in the sense of weakly solving the conformal positive scalar curvature equation.

Differential Geometry
Diameter Growth and Bounded Topology of Complete Manifolds with Nonnegative Ricci Curvature

Huihong Jiang,Yi-Hu Yang

DOI: https://doi.org/10.1007/s10455-016-9539-8

2017-01-01

Annals of Global Analysis and Geometry

Abstract:In this note, we show that a complete n-dim Riemannian manifold with nonnegative Ricci curvature is of finite topological type provided that the diameter growth of M is of order $o(r^{((n-1)\alpha +1)/n})$ and the sectional curvature is no less than $-{\frac{c}{r^{2\alpha }}}$ (here, $0 \le \alpha \le 1$ and c is some positive constant) outside a geodesic ball large enough. In particular, if in a neighborhood of an isolated end of the manifold in question, the above assumptions are satisfied, then the end has a collared neighborhood.
Two-dimension vanishing, splitting and positive scalar curvature

Xingyu Zhu

2024-11-11

Abstract:We prove several analogs of Gromov's macroscopic dimension conjecture with extra curvature assumptions. More explicitly, we show that for an open Riemannian $n$-manifold $(M,g)$ of nonnegative Ricci (resp. sectional) curvature, if it has uniformly positive scalar curvature and it is uniformly volume noncollapsed, then the essential (resp. Hausdorff) dimension of an asymptotic cone, as a notion of largeness, has a sharp upper bound $n-2$, which is $2$ less than the upper bound for an open Riemannian manifold with only nonnegative Ricci curvature. As a consequence, the dimension of space of linear growth harmonic functions of $M$ has upper bound $n-1$ which is also $2$ less than the sharp bound $n+1$ when $M$ only has nonnegative Ricci curvature. We also prove the first Betti number upper bound is $n-2$ if $M$ is compact, and $n-3$ if $M$ is non-compact. When $M$ is compact we show a fibration theorem over torus, and a rigidity theorem for the fiber when the first Betti number upper bound is achieved.

Differential Geometry,Metric Geometry
The Sphere Theorems for Manifolds with Positive Scalar Curvature

Juan-Ru Gu,Hong-Wei Xu

DOI: https://doi.org/10.4310/jdg/1354110198

2012-01-01

Journal of Differential Geometry

Abstract:Some new differentiable sphere theorems are obtained via the Ricci flow and stable currents. We prove that if $M^n$ is a compact manifold whose normalized scalar curvature and sectional curvature satisfy the pointwise pinching condition $R_0>\sigma_{n}K_{\max}$, where $\sigma_n\in (\frac{1}{4},1)$ is an explicit positive constant, then $M$ is diffeomorphic to a spherical space form. This gives a partial answer to Yau's conjecture on pinching theorem. Moreover, we prove that if $M^n(n\geq3)$ is a compact manifold whose $(n-2)$-th Ricci curvature and normalized scalar curvature satisfy the pointwise condition $Ric^{(n-2)}_{\min}>\tau_n(n-2)R_0,$ where $\tau_n\in (\frac{1}{4},1)$ is an explicit positive constant, then $M$ is diffeomorphic to a spherical space form. We then extend the sphere theorems above to submanifolds in a Riemannian manifold. Finally we give a classification of submanifolds with weakly pinched curvatures, which improves the differentiable pinching theorems due to Andrews, Baker and the authors.

Three-manifolds with bounded curvature and uniformly positive scalar curvature

On Positive Scalar Curvature and Moduli of Curves

Lower bound for L<sup>n/2</sup> curvature norm and its application

Lower bound for L n/2 curvature norm and its application

A sharp scalar curvature inequality for submanifolds

Complete Riemannian 4-manifolds with uniformly positive scalar curvature

Metric limits of manifolds with positive scalar curvature

Strengthened injectivity radius bounds for manifolds with positive scalar curvature

ON COMPACT 3-MANIFOLDS WITH NONNEGATIVE SCALAR CURVATURE WITH A CMC BOUNDARY COMPONENT

Complete 3-manifolds of positive scalar curvature with quadratic decay

Effective volume growth of three-manifolds with positive scalar curvature

Three-manifolds with non-negatively pinched Ricci curvature

Optimal asymptotic volume ratio for noncompact 3-manifolds with asymptotically nonnegative Ricci curvature and a uniformly positive scalar curvature lower bound

Normal scalar curvature and a pinching theorem in 𝕊^m × ℝ and ℍ m × ℝ

Geometry of three-dimensional manifolds with positive scalar curvature

Integral of Scalar Curvature on Non-parabolic Manifolds

On the Scalar Curvature Compactness Conjecture in the Conformal Case

Diameter Growth and Bounded Topology of Complete Manifolds with Nonnegative Ricci Curvature

Two-dimension vanishing, splitting and positive scalar curvature

The Sphere Theorems for Manifolds with Positive Scalar Curvature