Abstract:Magnetic nanoparticle hyperthermia (MNPH) has emerged as a promising cancer treatment that complements conventional ionizing radiation and chemotherapy. MNPH involves injecting iron-oxide nanoparticles into the tumor and exposing it to an alternating magnetic field (AMF). Iron oxide nanoparticles produce heat when exposed to radiofrequency AMF due to hysteresis loss. Minimizing the non-specific heating in human tissues caused by exposure to AMF is crucial. A pulse-width-modulated AMF has been shown to minimize eddy-current heating in superficial tissues. This project developed a control strategy based on a simplified mathematical model in MATLAB SIMULINK®to minimize eddy current heating while maintaining a therapeutic temperature in the tumor. A minimum tumor temperature of 43 [°C] is required for at least 30 [min] for effective hyperthermia, while maintaining the surrounding healthy tissues below 39 [°C]. A model predictive control (MPC) algorithm was used to reach the target temperature within approximately 100 [s]. As a constrained MPC approach, a maximum AMF amplitude of 36 [kA/m] and increment of 5 [kA/m/s] were applied. MPC utilized the AMF amplitude as an input and incorporated the open-loop response of the eddy current heating in its dynamic matrix. A conventional proportional integral (PI) controller was implemented and compared with the MPC performance. The results showed that MPC had a faster response (30 [s]) with minimal overshoot (1.4 [%]) than PI controller (115 [s] and 5.7 [%]) response. In addition, the MPC method performed better than the structured PI controller in its ability to handle constraints and changes in process parameters.

Switched-Actuator Systems with Setup Times: Efficient Modeling, MPC, and Application to Hyperthermia Therapy

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

Get the design right, the rest is automatic: Towards an adaptive MPC controller

Discrete-time MPC for switched systems with applications to biomedical problems

Constraint Removal for MPC with Performance Preservation and a Hyperthermia Cancer Treatment Case Study

Robust Mpc for Linear Systems with Structured Time-Varying Uncertainties and Saturating Actuator

Lyapunov-Based Fast Finite-State Model Predictive Control for Sensorless Three-Phase Four-Arm MMC

Model predictive control for space robot manipulator modeled by switched systems: A data‐driven approach

Tailored Presolve Techniques in Branch-and-Bound Method for Fast Mixed-Integer Optimal Control Applications

Switched model predictive control of switched linear systems: Feasibility, stability and robustness.

Model Predictive Control for Switching Systems with Dwell-Time Restriction.

Model predictive control (MPC) applied to a simplified model, magnetic nanoparticle hyperthermia (MNPH) treatment process

Gain-scheduling Distributed MPC for Polytopic Uncertain Systems Subject to Actuator Saturation

Accelerating soft-constrained MPC for linear systems through online constraint removal

ASAP-MPC: An Asynchronous Update Scheme for Online Motion Planning with Nonlinear Model Predictive Control

Smc for discrete delayed semi-Markov switching systems

Model Predictive Control of Switched Linear Systems With Persistent Dwell-Time Constraints: Recursive Feasibility and Stability

Distributed Model Predictive Control for Piecewise Affine Systems Based on Switching ADMM

On Switched MPC of a Class of Switched Linear Systems with Modal Dwell Time

Distributed Model Predictive Control for Polytopic Uncertain Systems Subject to Actuator Saturation

Model Predictive Control Strategies in Switched Reluctance Motor Drives – an Overview