Abstract:Silicon is considered as a first candidate for ideal anode material of the next-generation lithium-ion battery due to its high theoretical capacity to meet the demand for higher energy density. On the other hand, high theoretical capacity is accompanied by massive volume expansion, which gives arise to high stress and crack and pulverization of anode particles. Finally, the capacity of the battery fades gradually. While some kinds of factors contribute to the failure of silicon-based electrodes, the most important one is the diffusion-induced stress generated in silicon-based electrode particles. The cyclic processes of lithiation and delithiation are accomplished by the intercalation into and deintercalation from the silicon particles of lithium ions. During the cycle, physical processes and chemical processes, such as diffusion of lithium ions, phase transition, and volume expansion, take place simultaneously, making the cyclic process a strong-coupling problem to be addressed. For example, the intercalation of lithium ions into the electrode results in volume expansion and phase transition of anodes, thereby inducing stress; in turn, stress affects the diffusion process of lithium ions. Aiming to probe this problem, with the finite deformation hypothesis, an electrochemical-mechanical coupling model is used to study the variation and distribution of concentration and stress of core-shell structure during lithiation. And more importantly, great emphasis is put on the optimal design of core-shell structure. The numerical results show that the shell is useful in prohibiting the volume expansion of silicon core, but large compressive radial stress in silicon core may cause the core and shell to be detached, while the tangential tensile stress at the core-shell interface leads the shell to fracture. To improve the electrochemical and mechanical performance and hence lengthen the cycle life of lithium-ion batteries, two kinds of optimal designs are considered: 1) single-layered core-shell structure and 2) double-layered core-shell structure. The numerical results suggest that the softer shell material is suitable for a single-layered core-shell structure and the inner-soft & outer-hard design is optimal for the double-layered core-shell structure. Furthermore, the effects of Young's modulus of the inner and outer carbon layer materials on the chemical and mechanical performance of anode are explored. The simulation shows that the optimal Young's modulus of the inner shell is less than 10 GPa, and that of the outer shell is not higher than 70 GPa. This research is helpful in designing and optimizing the silicon-based anode electrodes of lithium-ion batteries.

Core-shell enhanced single particle model for lithium iron phosphate batteries: model formulation and analysis of numerical solutions

Core-shell enhanced single particle model for LiFePO$_4$ batteries

A Simultaneous Multiscale and Multiphysics Model and Numerical Implementation of a Core-Shell Model for Lithium-Ion Full-Cell Batteries

A Hybrid Electrochemical Multi-Particle Model for Li-ion Batteries

Finite-volume method and observability analysis for core-shell enhanced single particle model for lithium iron phosphate batteries

An Extended Single Particle Model of Lithium-ion Batteries Based on Simplified Solid-Liquid Diffusion Process

Discharge Model for the Lithium Iron-Phosphate Electrode

A Simplified Multi-Particle Model for Lithium Ion Batteries Via A Predictor-Corrector Strategy and Quasi-Linearization

Mesoscopic modeling of Li insertion in phase-separating electrode materials: application to lithium iron phosphate

On the analytical solution of single particle models and semi-analytical solution of P2D model for lithium-ion batteries

A three‐dimensional thermal‐electrochemical‐mechanical‐porous flow multiscale formulation for battery cells

A new extension of physics-based single particle model for higher charge-discharge rates

A transfer function type of simplified electrochemical model with modified boundary conditions and Padé approximation for Li-ion battery: Part 1. lithium concentration estimation

Simulation and Optimization of Silicon/carbon Core-Shell Structures in Lithium-Ion Batteries Based on Electrochemical-Mechanical Coupling Model

An Extented Single Particle Method for Lithium-ion Batteries

Introducing a new model for solid-state batteries: Parameter estimation and sensitivity analysis on diffusion, concentration, and electrochemical kinetics

Bi-phasic lithiation/delithiation dynamics in Li-ion batteries: application of the Smoothed Boundary Method in the phase field model

Towards optimal performance and in-depth understanding of spinel Li$_4$Ti$_5$O$_{12}$ electrodes through phase field modeling

Advancing Cobalt‐Free Lithium‐Ion Batteries through Electrochemical Model Refinement and Experimental Parametrization of LNMO|Gr Cells with Gel Polymer Electrolytes

Simplified numerical modeling and analysis of electrolyte behavior in multiple physical fields for lithium-ion batteries

Multi-physics modeling of lithium-ion batteries and charging optimization