Abstract:The Simons Observatory is a ground-based telescope array located at an elevation of 5200 meters, in the Atacama Desert in Chile, designed to measure the temperature and polarization of the cosmic microwave background. It comprises four telescopes: three 0.42-meter small aperture telescopes (SATs), focused on searching for primordial gravitational waves, and one 6-meter large aperture telescope, focused on studying small-scale perturbations. Each of the SATs will field over 12,000 TES bolometers, with two SATs sensitive to both 90 and 150GHz frequency bands (SAT-MF1, and SAT-MF2), while the third SAT is sensitive to 220 and 280GHz frequency bands. Prior to its deployment in 2023, the optical properties of SAT-MF1 were characterized in the laboratory. We report on measurements of near-field beam maps acquired using a thermal source along with measurements using a holographic method that enables characterization of the amplitude and phase of the beam response, yielding an estimate of the far-field radiation pattern received by SAT-MF1. We find that the near-field half-width-half-maximum (HWHM) requirements are met across the focal plane array for the 90GHz frequency band, and through most of the focal plane array for the 150GHz frequency band. The mean of the bandpass averaged HWHM of the edge-detector focal plane modules match the simulated HWHM to 10.4%, with the discrepancy caused by fringing in the simulation. The measured beam profiles match simulations to within 2dB from the beam center to at least the -10dB level. Holography estimates of the far-field 90GHz beams match the full-width-half-maximum from simulation within 1%, and the beam profiles deviate by less than 2dB inside the central lobe. The success of the holography and thermal beam map experiments confirmed the optical performance was sufficient to meet the science requirements. On-site observations are currently underway.

The Simons Observatory: Complex Impedance Measurements for a Full Focal-Plane Module

The Simons Observatory: Large-Scale Characterization of 90/150 GHz TES Detector Modules

The Simons Observatory: Design, Optimization, and Performance of Low-Frequency Detectors

The Simons Observatory Microwave SQUID Multiplexing Detector Module Design

The Simons Observatory: Production-level Fabrication of the Mid- and Ultra-High-Frequency Wafers

The Simons Observatory: Overview of data acquisition, control, monitoring, and computer infrastructure

The Simons Observatory: Studies of Detector Yield and Readout Noise From the First Large-Scale Deployment of Microwave Multiplexing at the Large Aperture Telescope

The Simons Observatory: Design, integration, and testing of the small aperture telescopes

The Simons Observatory: Design, Integration, and Current Status of Small Aperture Telescopes

The Simons Observatory: Deployment and current configuration of the Observatory Control System for SAT-MF1 and data access software systems

The Simons Observatory: the Large Aperture Telescope Receiver (LATR) Integration and Validation Results

The Simons Observatory: A Minimum-Cost Matching Algorithm for Pairing Measured Resonances with Designed Detectors

Characterization of Transition Edge Sensors for the Simons Observatory

The Simons Observatory: Development and Validation of the Large Aperture Telescope Receiver

The Simons Observatory: laboratory beam characterization for the first small aperture telescope

Development and performance of Universal Readout Harnesses for the Simons Observatory

The Simons Observatory: Project Overview

The Simons Observatory: the Large Aperture Telescope (LAT)

The Simons Observatory: Antenna control software integration and implementation

Simons Observatory: Observatory Scheduler and Automated Data Processing