Abstract:The Upgrade II of the LHCb detector, foreseen for 2031, will operate at an instantaneous luminosity of 1.5 x 10$^{34}$ cm$^{-2}$s$^{-1}$, accumulating a sample of more than 300 fb$^{-1}$. To cope with the estimated pile-up of 42 and 200 charged particle tracks per event, precise timing will be added to the tracking and vertexing sub-systems. A new Vertex Locator (VELO), capable to manage the expected 7.5-fold increase in data rate, occupancy, and radiation fluence is needed. Based on a 4D hybrid silicon pixel technology, with enhanced rate and timing capabilities on the ASIC, the new VELO will allow for precise beauty & charm hadron identification and real time pattern recognition. Through detailed simulations, the fluence, inner radius, material budget and pixel size phase space are explored, while constraining the Impact Parameter (IP) resolution to the Upgrade I value. Two distinct scenarios emerge as starting points for further optimizations, with inner radii and end of life fluence of 5.1 mm at 6 x 10$^{16}$ n$_{eq}$/cm$^{2}$ and 12.5 mm at 8 x 10$^{15}$ n$_{eq}$/cm$^{2}$ respectively. Advances and current R&D on sensor technologies, including LGADs, 3Ds and planar pixels are reviewed, focusing on radiation hard designs and defect engineering. ASIC related requirements with respect to sensor capacitance and power budget are taken into consideration for achieving the 30 ps per hit timing target towards the future 28 nm protype submission. Improvements in cooling, mechanics and vacuum implementations are examined with respect to each layout scenario. The use of bi-phasic Krypton cooling is evaluated as an option for the case of above 1.5 W/cm$^{2}$ power dissipation. Replaceable sensor modules, coupled with 3D printed titanium supports are also under consideration. Finally, a comprehensive R&D schedule towards final design optimization within a six-year period is discussed.

Measurement of thermal properties of the LHCb VELO detector using track-based software alignment

The Upgrade of LHCb VELO

The upgrade of the LHCb Vertex Locator

Mechanical stability of the CMS strip tracker measured with a laser alignment system

LHC beam monitoring via real-time hit reconstruction in the LHCb VELO pixel detector

The LHCb VELO Upgrade Module Construction

Real-time calibration and alignment of the LHCb RICH detectors

The Upgrade I of LHCb VELO -- towards an intelligent monitoring platform

An LHCb Vertex Locator (VELO) for 2030s

Radiation damage in the LHCb Vertex Locator

Sensor shapes and weak modes of the ATLAS Inner Detector track-based alignment

Test beam measurement of ATLAS ITk Short Strip module at warm and cold operational temperature

F9-6 Surgical Treatment of Small Presymtomatic Hepatocellular Carcinoma

Heavy Flavour measurements in Pb$-$Pb collisions with the upgraded ALICE Inner Tracking System

Evaporative CO2 cooling using microchannels etched in silicon for the future LHCb vertex detector

Mapping the Material in the LHCb Vertex Locator Using Secondary Hadronic Interactions

The LHCb VELO Upgrade II: Design and development of the readout electronics

Higher-order mode-based cavity misalignment measurements at the free-electron laser FLASH

Temperature Studies for ATLAS MDT BOS Chambers

Alice Alignment, Tracking and Physics Performance Results

Selection and processing of calibration samples to measure the particle identification performance of the LHCb experiment in Run 2