M. Sokolowski,S. J. Tingay,D. B. Davidson,R. B. Wayth,D. Ung,J. W. Broderick,B. Juswardy,M. Kovaleva,G. Macario,G. Pupillo,A. Sutinjo
Abstract:The SKA will be the largest radio astronomy observatory ever built, providing unprecedented sensitivity over a very broad frequency (50 MHz to 15.3 GHz). The SKA-Low (50 - 350 MHz), will be built at the MRO in Western Australia. It will consist of 512 stations each composed of 256 dual-polarised antennas, and the sensitivity of an individual station is pivotal to the performance of the entire SKA-Low telescope. The answer to the question in the title is, it depends. The sensitivity of a low frequency array, such as an SKA-Low station, depends strongly on the pointing direction of the digitally formed station beam and the local sidereal time (LST), and is different for the two orthogonal polarisations of the antennas. The accurate prediction of the SKA-Low sensitivity in an arbitrary direction in the sky is crucial for future observation planning. We present here a sensitivity calculator for the SKA-Low radio telescope, using a database of pre-computed sensitivity values for two realisations of an SKA-Low station architecture. One realisation uses the log-periodic antennas selected for SKA-Low. The second uses a known benchmark, in the form of the bowtie dipoles of the MWA. Data collected by both stations (deployed at the MRO in 2019) were used to measure their sensitivity at selected frequencies and over at least 24 h intervals, and were compared to the predictions described in this paper. The sensitivity values stored in the SQLite database were pre-computed for the X, Y and Stokes I polarisations in 10 MHz frequency steps, 0.5 hour LST intervals, and 5 degree resolution in pointing directions. The database allows users to estimate the sensitivity of SKA-Low for their favourite object using interactive web-based or command line interface, which can also calculate the sensitivity for arbitrary pointing directions, frequencies, and times without interpolations.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is: how to accurately predict the sensitivity of the Square Kilometre Array - Low Frequency Band (SKA - Low) in any direction in the sky, which is crucial for future observation planning. Specifically, the paper focuses on how the sensitivity of SKA - Low stations is affected by the pointing direction, local sidereal time (LST), and antenna polarization, and provides a method to quickly estimate the sensitivity under these parameters.
### Background of the Paper
The Square Kilometre Array (SKA) will be the world's largest radio observatory, providing unprecedented sensitivity from 50 MHz to 15.3 GHz. The low - frequency part of the SKA (SKA - Low) will operate in the 50 - 350 MHz frequency band at the Murchison Radio Observatory (MRO) in Western Australia. SKA - Low consists of 512 stations, and each station contains 256 dual - polarized antennas. The sensitivity of each station is crucial to the performance of the entire SKA - Low telescope.
### Factors Affecting Sensitivity
- **Pointing Direction**: The sensitivity of the station beam formed by numbers strongly depends on the pointing direction.
- **Local Sidereal Time (LST)**: The sky noise temperature distribution varies at different times, affecting the sensitivity.
- **Antenna Polarization**: The two orthogonally polarized antennas respond differently to the same sky, resulting in the total Stokes I sensitivity being a complex combination.
### Solutions
In order to accurately predict the sensitivity of SKA - Low in any direction, the paper introduces the following tools and methods:
1. **Sensitivity Calculator**:
- Use a pre - calculated sensitivity value database, which stores the sensitivity values of two SKA - Low station architectures (using log - periodic antennas and MWA butterfly dipole antennas).
- The sensitivity values in the database are pre - calculated with a 10 MHz frequency step, a 1/2 - hour LST interval, and a 5° pointing resolution.
- Provide a web - based interactive interface and a command - line Python script, allowing users to quickly estimate the SKA - Low sensitivity under any observation parameters.
2. **System Temperature Calculation**:
- The system temperature \( T_{\text{sys}}(\nu, \text{LST}) \) is the sum of the receiver temperature \( T_{\text{rcv}}(\nu) \) and the antenna temperature \( T_{\text{ant}}(\nu, \text{LST}) \).
- The antenna temperature \( T_{\text{ant}}(\nu, \text{LST}) \) is calculated by integrating the sky temperature \( T_{\text{sky}}(\nu, \theta, \phi, \text{LST}) \) and weighting the station beam pattern \( B_{\text{st}}(\nu, \theta, \phi) \).
3. **Station Effective Area Calculation**:
- The effective area \( A_e(\nu, \theta_p, \phi_p) \) of the station can be calculated according to the standard equation:
\[
A_e(\nu, \theta_p, \phi_p) = \frac{G(\nu, \theta_p, \phi_p) c^2}{4 \pi \nu^2}
\]
- where \( G(\nu, \theta_p, \phi_p) \) is the station gain, which can be calculated by electromagnetic simulation software (such as FEKO) or simplified methods (such as the array factor method).
4. **System Equivalent Flux Density (SEFD) Calculation**:
- SEFD is the flux density incident on the antenna such that the generated power is equal to the system noise:
\[
\text{SEFD} = \frac{2 k T_{\text{sys}}(\nu, \text{LST})}{A_e(\nu)}
\]
- For Stokes I polarization, SEFD can be calculated by the following formula:
\[
\text{