Abstract:The alloy element Nb plays an important role in improving the performance of zirconium alloys in nuclear reactors. The effect mechanism of Nb doping on mechanical and thermodynamic properties was investigated using experimental and theoretical methods. The results of this study showed us that Nb doping refines grains and enhances hardness. The hardness increases from 2.67 GPa of pure Zr to 2.99 GPa of Zr1.5Nb. Depending on the first-principles calculations, the hardness decreases with the increase in the Nb concentration in the Zr matrix, namely from 2.45 Gpa of pure Zr to 1.78 GPa of Zr1.5Nb. If the first-principles calculations indicate that the hardness decreases with the increase in the Nb concentration in the Zr matrix, grain refinement or defects could play a major role in the increase in hardness. Furthermore, regarding the effect of Nb doping on thermal expansion coefficients, the increase in Nb content causes the thermal expansion coefficients to decrease, which might stem from the strong binding energy between Nb and Zr atoms. The thermal conductivities of three samples show similar changing trends, indicating that thermal conductivity begins to decrease at room temperature and reaches a minimum value of around 400 °C. The thermal conductivity of pure zirconium samples is consistently higher, is more obvious than that of Nb-doped samples in the test range, and decreases with an increase in the doping concentration. The possible reasons for this might stem from the distortion of the Zr matrix due to Nb substitution doping and grain refinement, both of which cause phonon propagation scattering and thus hinder the propagation of phonons. The results obtained herein may be useful for the development of advanced nuclear fuels and waste forms that utilize zirconium in applications beyond their current usage.

Effect of zirconium doping on mechanical properties of $W_{1-x}Zr_xB_2$ on the base of ab initio calculations and magnetron sputtered films

New ZrB$_2$ polymorphs: First-principles calculations

Effect of titanium and deposition parameters on microstructure and mechanical properties of W-Ti-B thin films deposited by High Power Impulse Magnetron Sputtering

The Effect of Niobium on the Mechanical and Thermodynamic Properties of Zirconium Alloys

First Approach to ZrB2 Thin Films Alloyed with Silver Prepared by Magnetron Co-Sputtering

Evolution of the structure and properties of (Zr1-xHfx)B2 solid solution ceramics from first-principle theory

Theoretical Elastic Stiffness and Thermodynamic Properties of Zirconium Dodecaboride from First Principles Calculation

The effect of zirconium on the microstructure and mechanical properties of a super-high-strength Al-Zn-Mg-Cu alloy

Mechanical and tribological properties of Ti1-xZrxB2 coatings deposited by magnetron sputtering on hot work steel

Mechanical, Corrosion and Wear Characteristics of Cu-Based Composites Reinforced with Zirconium Diboride Consolidated by SPS

Enhanced Mechanical Properties and Oxidation Resistance of Zirconium Diboride Ceramics via Grain‐Refining and Dislocation Regulation

Dual Plate-Like Grains of (ti, Zr)B2 and W2B5 Toughened Solid Solution Composites Fabricated Via In-Situ Reaction Spark Plasma Sintering of (ti, W)C and ZrB2 Powders

First-principles structural design of superhard material of ZrB4

A study of mechanical properties and WEDM machinability of spark plasma sintered ZrB2-B4C ceramic composites

Effect of different crystal forms of ZrO 2 on the microstructure and properties of tungsten alloys

Effect of zirconium addition on microstructure and mechanical properties of Mg97Y2Zn1 alloy

Interstitial-Boron Solution Strengthened WB$_{3+x}$

Influence of TiB2 and CrB2 on densification, microstructure, and mechanical properties of ZrB2 ceramics

Grain Refinement Effect of ZrB2 in Laser Additive Manufactured Metastable Β-Titanium Alloy with Enhanced Mechanical Properties

The structural stability and mechanical properties of ZrH x from first-principles calculations

Electronic structure, elasticity and hardness of diborides of zirconium and hafnium: First principles calculations