Abstract:The design and safety assessment of Lead-cooled Fast Reactors (LFRs), being one of the Generation IV technologies, must be supported by extensive experimental campaigns. Such activities are necessary to completely understand the physical phenomena involved in such reactors, as well as to properly develop new numerical tools or validate the pre-existent ones. From the experimental point of view, ENEA Research Center of Brasimone is one of the most active institutions, thanks to its experimental platforms and know-how maturated since the early 2000s. From the numerical point of view, Computational Fluid Dynamics (CFD) codes are the most suitable ones to analyze some phenomena expected in a Heavy Liquid Metal (HLM)-cooled reactor, such as the complex 3D phenomena occurring within the pools or the core fuel assemblies. In addition, the fluid thermal conduction, usually neglected in a System Thermal-Hydraulic (STH) code, can assume a significant importance in some transient scenarios, e.g., loss of flow accidents with transition from forced to natural circulation. However, the safety analysis of the LFRs should still rely on the use of STH codes because of their lower computational cost compared to the CFD codes, also considering the high number of transient evolutions to be analyzed for the purpose of the reactor licensing. At ENEA Brasimone, a novel coupling approach has been developed to couple the CFD code Ansys CFX with the STH code RELAP5/Mod3.3. The coupled tool aims at exploiting the advantages of the two families of codes. It adopts a multi-scale approach to simulate in detail some circuit components while performing system-level analysis, so as to keep an acceptable computational time. The coupling technique is based on ad-hoc user routines written in FORTRAN and implemented in Ansys CFX, which acts as the master code. The user routines take care of time step management, data exchange, RELAP5 execution, and error checking. The goal of this paper is to assess the simulation capabilities of the coupled tool by reproducing a forced-to-natural-circulation transition test, carried out at the NACIE-UP facility, with LBE as working fluid. The work has been realized in the framework of the IAEA Coordinate Research Project-I31038, named "Benchmark of Transition from Forced to Natural Circulation Experiment with Heavy Liquid Metal Loop".

Simulation of the RIBRAS Facility with GEANT4

Beam Simulation Studies of ECR Beam Extraction and Low Energy Beam Transport for FRIB.

Simulating Araponga -- The High-Resolution Diffractometer of Brazilian Multipurpose Reactor

Numerical simulation of proton backscattering spectra in GEANT4 toolkit

Rms emittance measures for solenoid transport and facility for rare isotope beams front-end simulations

Longitudinal Electron Bunch Diagnostics Using Coherent Transition Radiation at the Irfel

Ion transport and gas collision effects in a radio frequency quadrupole cooler: installation in the Eltrap solenoid and beam calculations

MultiSIMNRA: a computational tool for self-consistent ion beam analysis using SIMNRA

Simulation of beam-induced plasma in gas-filled rf cavities

Development and Test of a Large-aperture Nb3Sn Cos-theta Dipole Coil with Stress Management

A Particle-in-cell Mode Beam Dynamics Simulation of Medium Energy Beam Transport for the SSC-Linac

Expanding RIB Capabilities at the Cyclotron Institute: \textsuperscript{3}He-LIG production with an Isobar Separator LSTAR

A system for online beam emittance measurements and proton beam characterization

Beamline Simulation for the NNBAR Experiment at the European Spallation Source

Full-Cycle Simulations of the Fermilab Booster

Microplanning with Communicative Intentions: The SPUD System

Collimation simulations for the FCC-ee

Analysis of the experimental tests performed at NACIE-UP facility through a novel CFX-RELAP5 codes coupling

Silicon tracker array for RIB experiments at SAMURAI

Simulation of Deflection and Photon Emission of Ultra-Relativistic Electrons and Positrons in a Quasi-Mosaic Bent Silicon Crystal

A Geant4 Based Simulation Platform of the HollandPTC R&D Proton Beamline for Radiobiological Studies