Abstract:The current research about the flow ripple of axial piston pump mainly focuses on the effect of the structure of parts on the flow ripple. Therein, the structure of parts are usually designed and optimized at rated working conditions. However, the pump usually has to work in large-scale and time-variant working conditions. Therefore, the flow ripple characteristics of pump and analysis for its test accuracy with respect to variant steady-state conditions and transient conditions in a wide range of operating parameters are focused in this paper. First, a simulation model has been constructed, which takes the kinematics of oil film within friction pairs into account for higher accuracy. Afterwards, a test bed which adopts Secondary Source Method is built to verify the model. The simulation and tests results show that the angular position of the piston, corresponding to the position where the peak flow ripple is produced, varies with the different pressure. The pulsating amplitude and pulsation rate of flow ripple increase with the rise of pressure and the variation rate of pressure. For the pump working at a constant speed, the flow pulsation rate decreases dramatically with the increasing speed when the speed is less than 27.78% of the maximum speed, subsequently presents a small decrease tendency with the speed further increasing. With the rise of the variation rate of speed, the pulsating amplitude and pulsation rate of flow ripple increase. As the swash plate angle augments, the pulsating amplitude of flow ripple increases, nevertheless the flow pulsation rate decreases. In contrast with the effect of the variation of pressure, the test accuracy of flow ripple is more sensitive to the variation of speed. It makes the test accuracy above 96.20% available for the pulsating amplitude of pressure deviating within a range of ±6% from the mean pressure. However, with a variation of speed deviating within a range of ±2% from the mean speed, the attainable test accuracy of flow ripple is above 93.07%. The model constructed in this research proposes a method to determine the flow ripple characteristics of pump and its attainable test accuracy under the large-scale and time-variant working conditions. Meanwhile, a discussion about the variation of flow ripple and its obtainable test accuracy with the conditions of the pump working in wide operating ranges is given as well.

Analysis of working characteristics of five-cylinder reciprocating pump based on digital twin and development of monitoring platform

Design and control of the hydraulic reciprocating pump

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Simulation on the dynamic pressure and flow of the seawater desalination axial piston pump

Numerical Simulation of Cavitating Flow in Water Hydraulic Axial Piston Pump

58812 ANALYSIS OF THE PISTON/CYLINDER PAIR OF AXIAL PISTON PUMP BASED ON VIRTUAL PROTOTYPE(Fluid-Structure Interaction in MBS)

Study on Control Performance of Digital Piston Pump Based on Virtual Prototype Technology

Analysis of the Flow Dynamics Characteristics of an Axial Piston Pump Based on the Computational Fluid Dynamics Method

Modeling and Simulation on Axial Piston Pump Based on Virtual Prototype Technology

Modeling and Analysis of the Churning Losses Characteristics of Swash Plate Axial Piston Pump

Research Of Measuring Method On The On-Line Output-Of Concrete Pump

Research on Pressure Pulsation Characteristics of Axial Piston Pump Based on Virtual Prototype

Impact of Typical Steady-State Conditions and Transient Conditions on Flow Ripple and Its Test Accuracy for Axial Piston Pump

Investigation on the Cross Power Control of Axial Piston Double Pump Based on the Virtual Prototype

Design and experimental validation of a valve-distributed water radial piston pump

THE TRANSITION OF WEAR AND LEAKAGE CHARACTERISTICS OF THE CYLINDER BLOCK/VALVE PLATE INTERFACE IN A WIDE RANGE OF OPERATING CONDITIONS

Finite Element Analysis on Piston of Axial Piston Pump Based on Virtual Prototype

Numerical Simulation and Analysis on Hydraulic Performance in Vertical Canned Motor Pump

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

Dynamic Simulation of a Seawater Plunger Pump

Numerical Simulation of Overturning Phenomenon of Axial Piston Pump Slipper Pair