Abstract:A dual-band staggered triangular checkerboard metasurface (STCM) with flexibility is proposed for the radar cross section (RCS) reduction. The designed STCM can obtain greater than 10 dB dual-broadband RCS reduction at the two side bands and high efficiency of mirror reflection in the center band whether in planar or cylindrical conformal cases. Compared with a traditional square checkerboard metasurface (TSCM) of the same size, the simulation results indicate that the STCM in the planar case shows stronger vertical RCS reduction, with a maximum improvement of 11.85 dB. Especially, the proposed STCM covered on the cylinder with the radius ( R ) of 90 mm can achieve over 10 dB RCS reduction in 8.2–11.4 GHz and 15.2–19.1 GHz, and the corresponding relative bandwidth (RB) is 32.7 % and 22.7 %, which is superior to other research results. The scattering characteristics of the cylinder conformal case become better ith the increase of R under the case of a certain size of the STCM. Furthermore, RCS reduction exceeding 7 dB can be obtained in 11.2–13.1 GHz (RB = 15.6 %) and 15.7–19.1 GHz (RB = 19.5 %) when the STCM is applied on the saddle surface. A prototype is fabricated and measured. The experiment result shows the STCM can achieve more than 10 dB RCS reduction in 8.6–11.7 GHz (RB = 30.5 %) and 15.2–18.7 GHz (RB = 20.6 %) when wrapped around a cylinder with R = 90 mm, which almost coincides with numerical simulation. The proposed STCM shows promising application prospects in electromagnetic (EM) stealth, microwave communication and conformable stealth devices.

Investigation of Radar Cross-Section Reduction for Dihedral Corner Reflectors Based on Camouflage Grass

High-precision RCS Measurement of Aircraft's Weak Scattering Source

Surface Impedance Modulation of FSS Composite Absorber for RCS Reduction at Normal and Grazing Incidence

Tapered Resistive Sheets and FSS Absorber Loading for the Wideband RCS Reduction of the Elliptic Surface at TM Polarization

Radar Target Radar Cross-Section Measurement Based on Enhanced Imaging and Scattering Center Extraction

Tapered Resistive Sheets Loading to the FSS Absorber for the Wide-Angle Monostatic RCS Reduction Applications

Design of Soft and Hard Composite Patterns for Electromagnetic Scattering Controlling at Both Normal and Grazing Incidence

Radar Cross Section Reduction of A Cavity in the Ground Plane

Wideband RCS Reduction of Thin Metallic Edges Mediated by Spoof Surface Plasmon Polaritons

Partition Layout Loading of Frequency Selective Surface Absorbers on the Curved Surfaces for the Significant RCS Reduction

Efficient Solution To The Rcs Of Trihedral Corner Reflector

A Space-Mapping-Based Optimal EM Design of RCS Reduction for Electrically Large Targets

A Novel Method for the Low-detectable Dihedral Corner Utilizing Phase Gradient Metasurface based on Phase Cancellation Mechanism

A Novel Combination-Type Electromagnetic Gradient Metasurface For Specular Rcs Reduction

Dual-broadband flexible metasurface based on the staggered triangular checkerboard layout for RCS reduction

Ultra-wideband RCS reduction based on reflection cancellation and tunable absorption

Radar cross section reduction of dipole antenna using checkerboard surface

In-band Radar Cross Section Reduction for Electromagnetic Window by Simultaneously Enhancing Transmission and Coding Reflection

Advances on Radar Cross Section Reduction of Microstrip Antenna Array

A Tightly Coupled Dipole Array with Diverse Element Reflection Phases for RCS Reduction

Random Combinatorial Gradient Metasurface for Broadband, Wide-Angle and Polarization-Independent Diffusion Scattering