Abstract:High-temperature thermal energy storage in oxide particles at temperatures above 600°C can couple concentrated solar energy with high-efficiency thermal power cycles to provide dispatchable solar-driven electricity. Challenges remain in developing cost-effective primary heat exchangers, which require expensive alloys, to extract the high-temperature thermal energy from the particles to power cycle fluids, such as supercritical CO 2 (sCO 2 ) in recuperated Brayton cycles. To explore one pathway for cost-effective, high-temperature particle heat exchangers, the current study demonstrates a shell-and-plate, particle–sCO 2 heat exchanger with narrow-channel fluidized beds coupled with micro-channel sCO 2 flows in the heat exchanger walls. This study evaluates the feasibility of multiple parallel, narrow-channel fluidized beds in shell-and-plate particle–sCO 2 HXs, to achieve high bed-wall heat fluxes at elevated temperatures. A reduced-order model simulates the narrow-channel, fluidized-bed particle–sCO 2 heat exchanger to design the fluidized bed geometry, in terms of depth, height, and number of channels,for a nominal 40-kW th heat exchanger at particle and sCO 2 inlet temperatures up to 600°C and 400°C respectively. The resulting shell-and-plate heat exchanger design operates with bubbling fluidization of the downward-flowing oxide particles to enhance bed-wall heat transfer. The heat exchanger core is fabricated with etched sCO 2 micro-channels in thin wall plates that are diffusion bonded to spacer frames to form the shell-and-plate structure with 12 parallel, fluidized bed channels, 10.4 mm deep. The heat exchanger is tested at the National Solar Thermal Test Facility at Sandia National Laboratories with CARBOBEAD HSP particles at design particle flow rates of 0.20 kg s −1 and inlet temperatures up to 525°C . Results show that fluidization across multiple parallel channel beds can maintain uniform particle inventory with a common freeboard zone above the heat exchanger core. Bubbling fluidization improves particle–wall heat transfer coefficients but also increases axial dispersion of particle thermal energy, which lowers the log-mean temperature difference such that total heat transfer remains relatively constant to within ±10% over a broad range of fluidization gas velocities. The axial dispersion required particle and sCO 2 flow rates to be increased by 25% over model-designed conditions to achieve the targeted 40 kW th , which indicates the importance of incorporating axial dispersion into heat exchanger design models and of deploying bed structures to suppress it. This study demonstrates the feasibility and preferred fluidizing gas conditions for particle heat exchangers for releasing high-temperature thermal energy storage systems.

One piece ceramic heat exchanger for concentrating solar power electric plants

Experimental and Simulation Study of Mn–Fe Particles in a Controllable-Flow Particle Solar Receiver for High-Temperature Thermochemical Energy Storage

Ceramic-metal composites for heat exchangers in concentrated solar power plants

Thermal insulation for a high temperature molten salt storage tank in a CSP plant

Design and modeling of a multiscale porous ceramic heat exchanger for high temperature applications with ultrahigh power density

Cost of Using Laser Powder Bed Fusion to Fabricate a Molten Salt-to-Supercritial Carbon Dioxide Heat Exchanger for Concentrating Solar Power

Demonstration of a multi-channel fluidized bed particle–supercritical carbon dioxide heat exchanger for concentrating solar applications

Modeling study and experimental investigation of SPSR and solid particles–sCO2 heat exchanger for concentrating solar power plant

Cross-Cutting CFD Support for Efficient Design of a Molten Salt Electric Heater for Flexible Concentrating Solar Power Plants

A Solar Air Receiver With Porous Ceramic Structures for Process Heat at Above 1000 °C—Heat Transfer Analysis

Modeling and parameter sensitivity analysis of fluidized bed solid particle/sCO2 heat exchanger for concentrated solar power plant

Numerical simulation and optimization of compact latent heat exchanger with micro-channel plate in shape-stabilized composite phase change material

Thermal Properties, Permeability and Compressive Strength of Highly Porous Accumulated Ceramsites in the Foundation of Salt Tank for Concentrate Solar Power Plants

Review of solid particle materials for heat transfer fluid and thermal energy storage in solar thermal power plants

Design and optimization of a new heterogeneous printed circuit plate heat exchanger with molten salt zigzag passage and supercritical CO2 airfoil fin passage

Design of a Compact Dry Cooler With an Aluminum Heat Exchanger Core for a Supercritical CO2 Power Cycle Is Evaluated for a Concentrating Solar Power Application

Evaluation of Alternative Designs for a High Temperature Particle-to-sCO2 Heat Exchanger

Optimization of a New Design of Molten Salt-to-CO2 Heat Exchanger Using Exergy Destruction Minimization

Techno-Economic Analysis of a Concentrating Solar Power Plant Using Redox-Active Metal Oxides as Heat Transfer Fluid and Storage Media

Design Features of the World’s First Commercial Concentrating Solar Power Plant Using the Particle Heating Receiver Concept

Heat Transfer and Flow Friction Performance of Molten Salt and Supercritical CO2 in Printed Circuit Heat Exchanger