Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

Timber-concrete composites (TCC) floors subjected to hogging moment

Structural Behavior of Fully Prefabricated Glubam-Concrete Composite Beams Constructed of Innovative Connectors

Timber-concrete Composite Bridges: Three Case Studies

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

Efficiency of timber-concrete composite floors with discrete perfobond connections: A numerical study

Experimental investigation on adhesively bonded timber-self-compacting concrete composite beams with a thin slab

Experimental and Theoretical Investigation of Prefabricated Timber-Concrete Composite Beams with and Without Prestress

Experimental study of an innovative steel-concrete composite beam under hogging moment

Experimental Study of Innovative Steel-Concrete Composite Beams under Hogging Moment

Long-term Performance of Timber-Concrete Composite Systems with Notch-Screw Connections

Experimental Investigation on the Long-Term Behaviour of Prefabricated Timber-Concrete Composite Beams with Steel Plate Connections

Behaviour of continuous steel-concrete composite beams strengthened with CFRP sheets at hogging-moment region

Vibration performance of timber-concrete composite floor section –verification and validation of analytical and numerical results based on experimental data

Feasibility and Performance of Novel Tapered Iron Bolt Shear Connectors in Demountable Composite Beams

Finite element modelling of adhesively bonded timber-concrete composite beams

Static Performances of Timber- and Bamboo-Concrete Composite Beams: A Critical Review of Experimental Results

Experimental and Nonlinear Analytical Studies on Prefabricated Timber–Concrete Composite Structures with Crossed Inclined Coach Screw Connections

Experimental Investigation on Innovative Connections for Timber–concrete Composite Systems

Effect of Interlayer and Inclined Screw Arrangements on the Load-Bearing Capacity of Timber-Concrete Composite Connections

Dynamic Response of Steel–Timber Composite Beams with Varying Screw Spacing