Purcell-enhanced single photons at telecom wavelengths from a quantum dot in a photonic crystal cavity

Catherine L. Phillips,Alistair J. Brash,Max Godsland,Nicholas J. Martin,Andrew Foster,Anna Tomlinson,René Dost,Nasser Babazadeh,Elisa M. Sala,Luke Wilson,Jon Heffernan,Maurice S. Skolnick,A. Mark Fox
DOI: https://doi.org/10.1038/s41598-024-55024-6
IF: 4.6
2024-02-24
Scientific Reports
Abstract:Quantum dots are promising candidates for telecom single photon sources due to their tunable emission across the different low-loss telecommunications bands, making them compatible with existing fiber networks. Their suitability for integration into photonic structures allows for enhanced brightness through the Purcell effect, supporting efficient quantum communication technologies. Our work focuses on InAs/InP QDs created via droplet epitaxy MOVPE to operate within the telecoms C-band. We observe a short radiative lifetime of 340 ps, arising from a Purcell factor of 5, owing to integration of the QD within a low-mode-volume photonic crystal cavity. Through in-situ control of the sample temperature, we show both temperature tuning of the QD's emission wavelength and a preserved single photon emission purity at temperatures up to 25K. These findings suggest the viability of QD-based, cryogen-free C-band single photon sources, supporting applicability in quantum communication technologies.
multidisciplinary sciences
What problem does this paper attempt to address?
### What problem does this paper attempt to solve? This paper is mainly dedicated to addressing the need for single - photon sources in quantum communication and quantum information processing, especially to develop an efficient single - photon source that can operate in the telecom C - band (1530 - 1565 nm). Specifically, the research team hopes to achieve this goal through the following aspects: 1. **Improve the brightness and efficiency of the single - photon source**: By integrating quantum dots (QD) into a photonic crystal cavity (PhCC) with a low mode volume and using the Purcell effect to enhance the emission rate, thereby shortening the radiative lifetime and increasing the brightness of the single - photon source. 2. **Achieve temperature tuning and maintain single - photon purity at low temperatures**: By controlling the sample temperature, the research team demonstrated the temperature tuning of the quantum - dot emission wavelength and proved that the single - photon emission purity was maintained at temperatures up to 25K. This provides the possibility for future applications of C - band single - photon sources without liquid - helium cooling. 3. **Develop a single - photon source compatible with existing fiber networks**: By adjusting the emission wavelength of the quantum dots to the C - band, this single - photon source can be made compatible with existing fiber networks, thus supporting long - distance fiber - optic quantum communication and low - loss connections between future quantum Internet nodes. 4. **Optimize the far - field collection efficiency**: By modifying the design parameters of the photonic crystal cavity (such as the aperture size and position) to improve the far - field collection efficiency from the L3 PhCC, further enhancing the practical application performance of the single - photon source. ### Main findings - The researchers successfully prepared InAs/InP quantum dots embedded in a photonic crystal cavity, and these quantum dots emit light in the C - band (1523.2 nm). - A very short radiative lifetime (about 340 ps) was observed, with a corresponding Purcell factor of about 5, indicating a significant shortening of the radiative lifetime. - Under different temperature conditions, the change in the quantum - dot emission wavelength was achieved through temperature tuning, and the high purity of single - photon emission (g(2)(0) ≈ 0.17) was maintained at temperatures up to 25K. - It was proposed that by improving the design and reducing background emission, the purity and repetition rate of the single - photon source can be further improved, making it more suitable for quantum communication and networking. ### Formula The expression for the Purcell factor \( F_P \) is as follows: \[ F_P=\frac{\tau_{\text{bulk}}}{\tau_{\text{cav}}}=\frac{3Q}{4\pi^2 V}\left(\frac{\omega_c}{\Delta \omega}\right)^2 \] where: - \( \tau_{\text{bulk}} \) is the radiative lifetime of the quantum dot without a cavity, - \( \tau_{\text{cav}} \) is the radiative lifetime of the quantum dot in the cavity, - \( Q \) is the quality factor of the cavity, - \( V \) is the mode volume of the cavity, - \( \omega_c \) is the cavity mode frequency, - \( \Delta \omega \) is the difference between the cavity mode frequency and the quantum - dot transition frequency. These results provide important experimental evidence and technical support for the development of efficient, stable, C - band single - photon sources compatible with existing fiber networks.