Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Modification of fiber-reinforced composites using polymer blends as matrices

Multi-Scale Computer Simulations of Polymer Blends

Tailoring the Performance of Polymer Composites Via Altering the Properties of the Intrapore Polymers of MCM-48 Nanocomposites As Fillers

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Progress of the Study of Molecular Composites

Polymer Blend Techniques for Designing Carbon Materials

Review on modification strategies of polyethylene/polypropylene immiscible thermoplastic polymer blends for enhancing their mechanical behavior

Merging versatile polymer chemistry with multifunctional nanoparticles: an overview of crosslinkable aromatic polyester matrix nanocomposites

A comprehensive review on the effect of synthetic filler materials on fiber-reinforced hybrid polymer composites

Polymerization‐induced phase separation and resulting thermomechanical properties of thermosetting/reactive nonlinear polymer blends: A review

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Polymer blends and composites from renewable resources

Surface Structured Polymer Blend Fibers and Their Application in Fiber Reinforced Composite

Hybrid Epoxy Composites with Both Powder and Fiber Filler: A Review of Mechanical and Thermomechanical Properties

Review of Methods for Enhancing Interlaminar Mechanical Properties of Fiber-Reinforced Thermoplastic Composites: Interfacial Modification, Nano-Filling and Forming Technology

Chemical, biological, and nanoclay treatments for natural plant fiber-reinforced polymer composites: A review

Melt-Processed Bi-Continuous Phase Polymer Composite with Selective Filler Localization: A Mini Review

Fabricating polylactic acid-based blend composite with balanced stiffness−toughness and excellent shape memory performance by incorporating surface-modified carbon nanofibers

Study of Numerous Resins Used in Polymer Matrix Composite Materials

Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite

Approaches of material selection, alignment and methods of fabrication for natural fiber polymer composites: A review