Abstract:Different engineering structures, e.g., long-span bridges, bundled conductors, and cable-supported photovoltaic modules, exhibit various frequency relationships among different degrees of freedom (DOFs). Despite extensive research, the initiation mechanisms of flutter remain somewhat ambiguous for a 3-DOF system considering heaving-lateral-torsional motions, especially when frequencies are close among different DOFs. This study introduced an explicit eigenvalue solution framework for tackling the 3-DOF linear flutter problem by utilizing matrix perturbation methods, enabling the extraction of modal damping and frequency solutions for all possible frequency scenarios. These solutions explicitly clarified the influence mechanism of all flutter derivatives (aerodynamic damping and stiffness), structural frequencies, and mechanical dampings. Important flutter derivatives, flutter risk level, and sensitivity level to mechanical damping and to frequency detuning were summarized in a table for all frequency scenarios, providing a panoramic perspective on flutter instability and the coupling mechanism. Numerical studies were conducted on a thin plate, the Akashi Kaikyo Bridge, and an eight-bundled conductor to examine the proposed explicit solutions. The results showed that approaching frequencies can amplify the coupling effect among different DOFs by half an order, but this does not necessarily mean the system is more prone to flutter. A system where the torsional frequency approximates the heaving/lateral frequency is expected to face a higher flutter risk if given significant torsional-related aerodynamic stiffness ( H3* , P3* ). Evidently, this high risk exhibits insensitivity to mechanical damping and small frequency-detuning. Though usually ignored in bridge flutter analysis, drag force and lateral motion could exert noticeable influence in a minority of cases, e.g., more than 10 m/s decrease of critical wind speed for the Akashi Kaikyo Bridge at large angles of attack. The proposed explicit solution framework provides a systematic view and new insights into the flutter initiation mechanism, serving as a reference in the design and studies of various engineering structures with different frequencies and coupling features.

Identification of flutter boundary of a bridge deck section using CFD and flutter margin analysis

Aerodynamic and flutter performance of the bridge deck with various countermeasures using computational fluid dynamics

Bayesian spectral density approach for identification of bridge section’s flutter derivatives operated in turbulent flow

Wind Tunnel Measurements for Flutter of a Long-Afterbody Bridge Deck

A novel multi-modal analytical method focusing on dynamic mechanism of bridge flutter

Uniform Identification Theory of Bridge Flutter Derivatives under Smooth Flow and Turbulent Flow

Flutter control optimization for a 5000 m suspension bridge with active aerodynamic flaps: a CFD-enabled strategy

Flutter performance simulation on streamlined bridge deck with active aerodynamic flaps

Time-domain aeroelastic loads and response of flexible bridges in gusty wind: Prediction and experimental validation

Energy budget analysis and engineering modeling of post-flutter limit cycle oscillation of a bridge deck

Simplified numerical method for flutter analysis of bridge based on steady-simplified wind field from unsteady flow

Numerical analysis on effect of box girder cross-section shapes on flutter characteristics of long-span bridges

Experimental Investigations on Nonlinear Flutter Behaviors of a Bridge Deck with Different Leading and Trailing Edges

Steady-Suction-Based Flow Control of Flutter of Long-Span Bridge

Data-Driven Bifurcation Analysis of Experimental Aeroelastic Systems Using Preflutter Measurements

Life-cycle assessment for flutter probability of a long-span suspension bridge based on field monitoring data

Explicit solution framework and new insights of 3-DOF linear flutter considering various frequency relationships

Shape optimization of closed-box girder considering dynamic and aerodynamic effects on flutter: a CFD-enabled and Kriging surrogate-based strategy

A new technique for identification of eighteen flutter derivatives using a three-degree-of-freedom section model

Generalized flutter reliability analysis with adjoint and direct approaches for aeroelastic eigen-pair derivatives computation

Probabilistic Prediction of Coalescence Flutter Using Measurements: Application to the Flutter Margin Method