Adsorption of mycotoxins by organozeolites.

A. Daković,M. Tomašević-Čanović,V. Dondur,G. Rottinghaus,Vesna B. Medakovic,S. Zarić

DOI: https://doi.org/10.1016/J.COLSURFB.2005.08.013

2005-11-25

Abstract:

What problem does this paper attempt to address?

Adsorption Performance and Mechanism of Mycotoxin on Montmorillonite Modified by Organosilicon Grafting

Mengxia Lv,Jiaqi Mao,Ying Zhou,Renxian Zhou,Jianmin Zhou

DOI: https://doi.org/10.1016/j.arabjc.2021.103314

IF: 6.212

2021-01-01

Arabian Journal of Chemistry

Abstract:A series of modified montmorillonites were prepared by acid modification method prior to the organosilicon grafting. Aflatoxin B1, zearalenone and deoxynivalenol (DON) were selected to evaluated the mycotoxin adsorption performance of modified montmorrillonites. The experimental results suggest that under acidic conditions, the higher the charge density in the covalent orbital of the active group, the stronger the interaction between it and the DON molecule, and the better the corresponding modified montmorillonite adsorbs DON. Silicified montmorillonite with active groups of cyano group and methacryloyloxy group has the best adsorption performance for DON, and the adsorption degree are 51.6% and 39.0%, respectively. However, under alkaline terms, due to the hydrolysis of active groups, the adsorption degree of montmorillonite on DON dropped steeply.
Lamellar mesoporous Mg-containing silicate adsorbents derived from iron ore tailings for high-efficient adsorption of mycotoxins and antibiotics

Guangyan Tian,Xue Hua,Kailong Nie,Yan Li,Kefeng Zhang,Wenqian Qu,Hongyan Ren,Junping Meng

DOI: https://doi.org/10.1016/j.seppur.2023.125556

IF: 8.6

2023-11-03

Separation and Purification Technology

Abstract:Iron ore tailing (IOT), as a typical solid waste, is in urgent need of high value-added utilization. The resource endowment and silicate composite characteristics owe IOT inherent potentials to prepare environmental functional materials. However, the Si-O-Si(M) bonds in IOT, having both ionic and covalent bonding properties, are very strong, which makes IOT difficult to efficiently utilize. Herein, sodium silicate, magnesium sulfate and potassium sodium tartrate (PST) were simultaneously introduced to promote the reconstitution of IOT as lamellar mesoporous Mg-containing silicate adsorbent. The adsorbents possess high specific area of 280.18 m 2 /g and abundant active sites, whose adsorption capacities for aflatoxin B 1 (AFB 1 ) and tetracycline hydrochloride (TC) were 30.05 mg/g, 217.39 mg/g, respectively. It is expected that the present work could lay a theoretical and experimental foundation for the high value-added functional utilization of IOT.

engineering, chemical
Modification of bentonite with orange peels extract and its application as mycotoxins’ binder in buffered solutions and simulated gastrointestinal fluids

Usman Rasheed,Qurat Ul Ain,Muhammad Yaseen,Xiaosu Fan,Xiaohua Yao,Zhangfa Tong,Bin Liu

DOI: https://doi.org/10.1016/j.jclepro.2020.122105

IF: 11.1

2020-09-01

Journal of Cleaner Production

Abstract:This study reports the fabrication of orange peels (OP) extract (water:ethanol:acetonitrile) modified organic-inorganic hybrid bentonite (OP-bentonite). The synthesized composite was employed for the adsorptive removal of carcinogenic mycotoxins (aflatoxin B1 (AFB1), fumonisin B1(FB1) and ochratoxin (OTA)). The product was texturally characterized by BET, FTIR, XRD, TGA, SEM, EDX and XPS techniques while quantification of toxins was performed using HPLC/LC-MS. The effect of reaction temperature, pH, adsorbent dosage, coexisting mycotoxins and gastro-intestinal fluids on the adsorption performance of OP-bentonite was systematically investigated. Isothermal data (pH 2.5 and 7.0) for toxins adsorption agreed well with the Langmuir isotherm model revealing maximum adsorption capacity (qmax) (mg/g) of 166 and 121 for AFB1, 3.87 and 1.78 for FB1 and 1.97 and 3.19 for OTA respectively. The adsorption kinetics followed pseudo-second-order kinetic model while its adsorption capacity surpassed many adsorbents reported for AFB1, FB1 and OTA with orders of magnitude. Therefore, attributed to the advantages of being efficient, green and simplified synthesis, OP-bentonite could be envisaged as a promising adsorbent for the enhanced sequestration of mycotoxins.

environmental sciences,green & sustainable science & technology,engineering, environmental
Adsorption of toxic organic compounds from water with hydrophobic silica aerogels

Suzana Štandeker,Zoran Novak,Željko Knez

DOI: https://doi.org/10.1016/j.jcis.2007.02.021

IF: 9.9

2007-06-01

Journal of Colloid and Interface Science

Abstract:Silica monolith aerogels with different degrees of hydrophobicity were prepared by incorporating methyltrimethoxysilane (MTMS) or trimethylethoxysilane (TMES) in standard sol-gel synthesis followed by supercritical drying of gels with carbon dioxide (CO(2)) at 40 degrees C and 100 bar. The hydrophobicity of the aerogels was tested by measuring the contact angle (theta). The aerogels were also characterised by FTIR, DSC, and porosity measurements. Adsorption capacity measurements show that such modified hydrophobic silica aerogels are excellent adsorbents for different toxic organic compounds from water. In comparison to granulated active carbon (GAC) they exhibit capacities which are from 15 to 400 times higher for all tested compounds. Adsorption properties of hydrophobic silica aerogel remain stable even after 20 adsorption/desorption cycles.

chemistry, physical
Simultaneous Detoxification of Aflatoxin B1, Zearalenone and Deoxynivalenol by Modified Montmorillonites

Jiaqi Mao,Ying Zhou,Guanglie Lv,Renxian Zhou

DOI: https://doi.org/10.3390/molecules27010315

IF: 4.6

2022-01-01

Molecules

Abstract:Raw Ca-based montmorillonite (MMT) was treated by H2SO4, calcination and organic compounds (hexadecyltrimethyl ammonium bromide (HTAB), cetylpyridinium chloride (CPC) and chitosan (CTS)), respectively. The modified montmorillonites were characterized by different methods and their adsorption performances for three mycotoxins (Aflatoxin B1 (AFB1), zearalenone (ZEA) and deoxynivalenol (DON)) were evaluated at pH = 2.8 and 8.0, respectively. The results indicate that surfactants (CPC and HTAB) intercalation is the most efficient modification, which obviously improves the adsorption performance of montmorillonite for mycotoxins, with adsorption efficiency of above 90% for AFB1 and ZEA whether under acid or alkaline conditions, due to the increase in basal spacing and the improvement of hydrophobicity. Moreover, the adsorption efficiencies of AFB1 and ZEA over CPC-modified montmorillonite (CPC-AMMT-3) coexisting with vitamin B6 or lysine are still at a high level (all above 94%). All modified montmorillonites, however, have low adsorption efficiency for DON, with somewhat spherical molecular geometry.
Removal of Aflatoxin B 1 and Zearalenone in Mixed Aqueous Solution by Palygorskite-Montmorillonite Materials In Situ Prepared from Palygorskite Mineral

Yan Zhao,Xiaoyu Han,Na Zhang,Junping Meng,Hong Zhang,Jinsheng Liang

DOI: https://doi.org/10.1021/acs.langmuir.2c03289

IF: 3.9

2023-02-10

Langmuir

Abstract:In view of the animal feeds inevitably contaminated by multiple mycotoxins, eco-friendly and efficient palygorskite-montmorillonite (Pal-Mt) materials were prepared to remove polar aflatoxin B1 (AFB1) and weak polar zearalenone (ZEN) from mixed mycotoxins aqueous solution. The adsorption properties and bonding mechanisms between Pal-Mt materials and mycotoxins (AFB1 and ZEN) were investigated systematically. The as-prepared Pal-Mt showed excellent adsorption capacity for AFB1 and ZEN in single- and binary-mycotoxin systems, indicating the effectiveness of Pal-Mt acting as multiple mycotoxin adsorbents. The kinetics of adsorption for ZEN was fast due to the adsorption on the external surface (film and intraparticle diffusion), while AFB1 molecules permeated into mesopores after the external adsorption for the more planar structure. Adsorption isotherms demonstrated that heterogeneous surface adsorption appeared between Pal-Mt and AFB1, and monolayer adsorption occurred on Pal-Mt and ZEN for different polarities of mycotoxins. Thermodynamic parameters illustrated that the adsorption process of both AFB1 and ZEN onto Pal-Mt was spontaneous and endothermic. The adsorption mechanism studies suggested that hydrogen bonding, electrostatic attraction, calcium bridging linkage, and ion-dipole played fundamental roles in the interaction between Pal-Mt and these two mycotoxins.

chemistry, multidisciplinary, physical,materials science
Adsorption of Volatile Organic Compounds Onto Natural Porous Minerals.

Guangxin Zhang,Yangyu Liu,Shuilin Zheng,Zaher Hashisho

DOI: https://doi.org/10.1016/j.jhazmat.2018.10.031

IF: 13.6

2018-01-01

Journal of Hazardous Materials

Abstract:The abundance of natural porous minerals and their low cost make them the potential adsorbents for VOCs (volatile organic compounds). In this paper, three natural minerals (diatomite, stellerite and vitric tuff) and their corresponding acid-treated minerals were used as adsorbents. The adsorption performances of minerals were investigated by the adsorption breakthrough curves of VOCs. The results indicated that the properties of organic compounds such as boiling point and polarity and the surface area and pore volume of minerals had obvious effects on the adsorption of VOCs over minerals. Increasing adsorption temperature and relative humidity would have negative effects on the VOC adsorption of minerals. The adsorption capacity of 2-heptanone over acid stellerite decreased by 7.2% as the temperature rose from 25°C to 45°C. The adsorption capacity of acid stellerite for 2-heptanone reduced by 60.9% when relative humidity increased from 0% to 75%. Minerals were tested for five adsorption-regeneration cycles to study the reusability. Better fittings of Thomas model, pseudo-first order kinetics model, and Freundlich model were showed in fitting the adsorption. Overall, porous minerals with high specific surface area and pore volume have promising prospect in VOCs adsorption.
An Overview of Conventional and Emerging Analytical Methods for the Determination of Mycotoxins

Irena Kralj Cigić,Helena Prosen

DOI: https://doi.org/10.3390/ijms10010062

IF: 5.6

2009-01-02

International Journal of Molecular Sciences

Abstract:Mycotoxins are a group of compounds produced by various fungi and excreted into the matrices on which they grow, often food intended for human consumption or animal feed. The high toxicity and carcinogenicity of these compounds and their ability to cause various pathological conditions has led to widespread screening of foods and feeds potentially polluted with them. Maximum permissible levels in different matrices have also been established for some toxins. As these are quite low, analytical methods for determination of mycotoxins have to be both sensitive and specific. In addition, an appropriate sample preparation and pre-concentration method is needed to isolate analytes from rather complicated samples. In this article, an overview of methods for analysis and sample preparation published in the last ten years is given for the most often encountered mycotoxins in different samples, mainly in food. Special emphasis is on liquid chromatography with fluorescence and mass spectrometric detection, while in the field of sample preparation various solid-phase extraction approaches are discussed. However, an overview of other analytical and sample preparation methods less often used is also given. Finally, different matrices where mycotoxins have to be determined are discussed with the emphasis on their specific characteristics important for the analysis (human food and beverages, animal feed, biological samples, environmental samples). Various issues important for accurate qualitative and quantitative analyses are critically discussed: sampling and choice of representative sample, sample preparation and possible bias associated with it, specificity of the analytical method and critical evaluation of results.

biochemistry & molecular biology,chemistry, multidisciplinary
Gluconobacter oxydans – potential biological agent for binding or biotransformation of mycotoxins

K. Markov,J. Frece,J. Pleadin,M. Bevardi,L. Barišić,J. Gajdoš Kljusurić,A. Vulić,Ž. Jakopović,J. Mrvčić

DOI: https://doi.org/10.3920/WMJ2018.2324

2019-10-07

World Mycotoxin Journal

Abstract:World Mycotoxin Journal, Ahead of Print.

toxicology,food science & technology,mycology
Innovative Use of Spirogyra sp. Biomass for the Sustainable Adsorption of Aflatoxin B1 and Ochratoxin A in Aqueous Solutions

Wipada Siri-anusornsak,Oluwatobi Kolawole,Siriwan Soiklom,Krittaya Petchpoung,Kannika Keawkim,Chananya Chuaysrinule,Thanapoom Maneeboon

DOI: https://doi.org/10.3390/molecules29215038

IF: 4.6

2024-10-26

Molecules

Abstract:This research investigates the efficacy of Spirogyra sp. biomass as an effective adsorbent for the removal of AFB1 and OTA from aqueous solutions. Several factors, including contact time, adsorbent dosage, pH level, and initial mycotoxin concentration, were analyzed to evaluate their impact on adsorption efficacy. The optimal contact time for equilibrium was determined at 60 min, during which the TPA obtained a 91% reduction in AFB1 and 68% removal of OTA. Although increasing the adsorbent dosage improved effectiveness, excessive quantities led to particle aggregation, hence diminishing adsorption performance. The optimal dosage of 5.0 mg/mL optimized the efficacy and use of resources. Adsorption was more efficacious at acidic to neutral pH levels (5–6), enhancing the accessibility of functional groups on the biomass. Kinetic analysis indicated that adsorption process followed a pseudo second-order model, whereas isotherm studies demonstrated a heterogeneous adsorption mechanism, with the Freundlich model providing the optimal fit. The TPB exhibited enhanced adsorption capacities for both mycotoxins, offering a viable solution for mitigating mycotoxin contamination in food and feed. These findings illustrate the significance of biomass treatment techniques in improving mycotoxin removal efficacy and suggest the potential of algal biomass in food safety applications.

chemistry, multidisciplinary,biochemistry & molecular biology
Effect of Acid-Treated and Hexadecyltrimethylammonium Bromide–modified Montmorillonites on Adsorption Performance of Mycotoxins

Jiaqi Mao,Guanglie Lv,Renxian Zhou

DOI: https://doi.org/10.1007/s11356-019-07118-2

IF: 5.8

2020-01-01

Environmental Science and Pollution Research

Abstract:A series of modified montmorillonites treated by acid and hexadecyltrimethylammonium bromide (HTAB) were prepared and characterized, and their adsorption performances for three mycotoxins (aflatoxin B1, zearalenone, and deoxynivalenol) were evaluated at pH 2.8 and 8.0, respectively. The results indicate that the layers of raw montmorillonite are exfoliated after acid treatment and more active sites for adsorption of weak polar mycotoxins are exposed. While the intercalation of HTAB leads to an obvious increase of the interlamellar spacing and hydrophobic character of montmorillonite. The HTAB-AMMT-3 modified by acid and HTAB exhibits excellent adsorption capacity towards aflatoxin B1 (AFB1) and zearalenone (ZEA) whether in acidic or alkaline conditions compared with raw montmorillonite (MMT). However, all modified montmorillonites have low adsorption capacity for DON due to its poor planarity preventing it from entering into interfacial layer of montmorillonite.
Complex Interplay and Catalytic Versatility of Tailoring Enzymes for Efficient and Selective Biosynthesis of Fungal Mycotoxins

Yong-Jun Zhong,Fei Cao,Long-Shuang Hu,Chu-Xuan Xu,Yan-An Zhu,Xuepeng Chen,Xu-Ming Mao

DOI: https://doi.org/10.1021/acs.jafc.2c07681

IF: 6.1

2023-01-01

Journal of Agricultural and Food Chemistry

Abstract:Mycotoxins have substantial impacts on agricultural production and food preservation. Some have high similarities in bioactivity but subtle differences on structures from various fungal producers. Understanding of their complex cross-biosynthesis will provide new insights into enzyme functions and food safety. Here, based on structurally related mycotoxins, such as aurovertins, asteltoxin, and citreoviridin, we showed that methyltransferase (MT)-catalyzed methylation is required for efficient oxidation and polyketide stability. MTs have broad interactions with polyketide synthases and flavin-containing monooxygenases (FMOs), while MT AstB is required for FMO AstC functionality in vivo. FMOs have common catalysis on pyrone-polyene intermediates but different catalytic specificity and efficiency on oxidative intermediates for the selective production of more toxic and complex mycotoxins. Thus, the subtle protein interaction and elaborate versatile catalysis of biosynthetic enzymes contribute to the efficient and selective biosynthesis of these structure-related mycotoxins and provide the basis to re-evaluate and control mycotoxins for agricultural and food safety.
Decontamination of Mycotoxin-Contaminated Feedstuffs and Compound Feed

Radmilo Čolović,Nikola Puvača,Federica Cheli,Giuseppina Avantaggiato,Donato Greco,Olivera Đuragić,Jovana Kos,Luciano Pinotti

DOI: https://doi.org/10.3390/toxins11110617

IF: 5.075

2019-10-25

Toxins

Abstract:Mycotoxins are known worldwide as fungus-produced toxins that adulterate a wide heterogeneity of raw feed ingredients and final products. Consumption of mycotoxins-contaminated feed causes a plethora of harmful responses from acute toxicity to many persistent health disorders with lethal outcomes; such as mycotoxicosis when ingested by animals. Therefore, the main task for feed producers is to minimize the concentration of mycotoxin by applying different strategies aimed at minimizing the risk of mycotoxin effects on animals and human health. Once mycotoxins enter the production chain it is hard to eliminate or inactivate them. This paper examines the most recent findings on different processes and strategies for the reduction of toxicity of mycotoxins in animals. The review gives detailed information about the decontamination approaches to mitigate mycotoxin contamination of feedstuffs and compound feed, which could be implemented in practice.

toxicology,food science & technology
Advances in the Applications of Clinoptilolite-Rich Tuffs

Jelena Pavlović,Jasna Hrenović,Dragan Povrenović,Nevenka Rajić

DOI: https://doi.org/10.3390/ma17061306

IF: 3.4

2024-03-13

Materials

Abstract:Adsorptive, catalytic, and antibacterial properties of clinoptilolite-rich tuffs (ZT) are presented here. ZT transformed into Fe-containing ZT (Fe-ZT) removes various organic and inorganic anions from water. Fe-ZT, which contains selenium, is beneficial for growing Pleurotus ostreatus mushrooms. The fungi convert inorganic Se from Fe-ZT into a more useful organically bonded form. ZT and Fe-ZT as supplements retain nitrogen and potassium in sandy, silty loam and silty clay soils. ZT shows an affinity toward toxic metal cations, which are essential for cleaning contaminated water. The adsorption of atenolol, acetylsalicylic, and salicylic acid onto M-ZT (M–Cu2+, Mn2+, Ni2+, or Zn2+) from water solutions suggests that both the natures of M and pharmaceuticals have a significant impact on the adsorption mechanism and determine the adsorption capability of the ZT. ZT is an excellent carrier for ultrafine (2–5 nm) nano oxide particles, which have been shown to have catalytic activity in different chemical processes and photodegradation reactions of organic pollutants. ZT can also be transformed into SO4-SnO2-ZT, which is catalytically active as a solid acid. M-ZT is an effective carrier of valuable bacteria. Ag-ZT possesses beneficial bactericidal activity in disinfecting water and soil remediation.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
High Efficiency of Myclobutanil Adsorption by CTAB-zeolite Structures: Experimental Evidence Meets Theoretical Investigation

Caio S. Moraes,Patrícia A. Carneiro,Diêgo N. Faria,Daniel F. Cipriano,Jair C. C. Freitas,Rodrigo G. Amorim,Ramon S. da Silva,Mendelssolm K. Pietre

DOI: https://doi.org/10.1007/s12633-024-02950-9

IF: 3.4

2024-03-27

Silicon

Abstract:Pesticides effectively manage fungal diseases in fruits and vegetables; however, their toxicity poses significant environmental risks to human beings. Consequently, the chemical industry faces a daunting challenge in controlling or eliminating the presence of pesticides in the natural environment. The present work reports the synthesis of zeolitic materials with distinct structural properties (starting from the layered precursor PREFER and 3D-faujasite) and their use for the removal of the pesticide myclobutanil. The PREFER sample underwent two distinct treatments: external functionalization with CTAB and layers separation (delamination). On the other hand, external functionalization of the faujasite surface with different CTAB contents was performed. The results showed that the potentially delaminated PREFER sample (PREFER-CTAB-90oC) performed better in removing the pesticide among all the samples due to the higher availability of CTAB on their exposed lamellae. In contrast, the samples with a double-layered arrangement of CTAB chains presented better pesticide removal performance in comparison with the samples with a single CTAB arrangement. DFT calculations were performed to elucidate the interaction mechanism occurring between myclobutanil and CTAB. The obtained results indicate that the adsorption of myclobutanil by two CTAB molecules is more efficient than a single CTAB; the calculated binding energy considering two CTAB molecules in the process was nearly four times larger than for a single CTAB. The theoretical data provided validation for the adsorbent performances, including a detailed discussion of molecular mechanisms (with and without solvent effects). This proof-of-principle study emphasizes the significant potential of CTAB-functionalized zeolite in removing myclobutanil. This represents an important advancement toward better understanding and harnessing the capabilities of this material for effective and efficient pesticide removal.

materials science, multidisciplinary,chemistry, physical
Tri-octahedral bentonites as potential technological feed additive for Fusarium mycotoxin reduction

Pilar Vila-Donat,Sonia Marín,Vicente Sanchis,Antonio J. Ramos

DOI: https://doi.org/10.1080/19440049.2020.1766702

2020-06-12

Abstract:In 2009 the EU Regulation 386/2009 established a new functional group of feed additives called "substances for reduction of the contamination of feed by mycotoxin". Later, di-octahedral bentonite (1 m558) was authorised, as an anti-aflatoxin additive, being the only additive of this group authorised to date. This work aims to demonstrate the effectiveness of other bentonites, such as tri-octahedral bentonites, versus Fusarium-mycotoxins, since very few adsorbents have proved their effectiveness in relation to this group of mycotoxins. For this purpose, 7 bentonites (six of them tri-octahedral) and 7 commercial adsorbents, added at 0.02% (w/v), were assayed in an in vitro adsorption experiment using two simulated gastro-intestinal (GI) juices (pH 1.3 and 6.8) versus zearalenone (ZEN: 0.1–5 mg/L), fumonisin B1 (FB1: 1–10 mg/L) and deoxynivalenol (DON: 2–10 mg/L). Mycotoxin adsorption data were fitted to Langmuir and Freundlich isotherms. In vitro adsorption experiments showed that ZEN and FB1 (in the latter case only in acid medium) were partially adsorbed, while the adsorption of DON was negligible. Moreover, the increase of adsorbent dose (up to 0.20%, w/v) significantly improved the in vitro adsorption of ZEN and FB1, reaching >90% of adsorption. The present work proposes the use of some tri-octahedral bentonites as feed additives for Fusarium-mycotoxin reduction.
Comparative Assessment of Different Yeast Cell Wall-Based Mycotoxin Adsorbents Using a Model- and Bioassay-Based In Vitro Approach

Ran Xu,Alexandros Yiannikouris,Umesh K. Shandilya,Niel A. Karrow

DOI: https://doi.org/10.3390/toxins15020104

IF: 5.075

2023-01-25

Toxins

Abstract:Frequently reported occurrences of deoxynivalenol (DON), beauvericin (BEA), and, to a lesser extent, ochratoxin A (OTA) and citrinin (CIT) in ruminant feed or feedstuff could represent a significant concern regarding feed safety, animal health, and productivity. Inclusion of yeast cell wall-based mycotoxin adsorbents in animal feeds has been a common strategy to mitigate adverse effects of mycotoxins. In the present study, an in vitro approach combining adsorption isotherm models and bioassays was designed to assess the efficacy of yeast cell wall (YCW), yeast cell wall extract (YCWE), and a postbiotic yeast cell wall-based blend (PYCW) products at the inclusion rate of 0.5% (w/v) (ratio of adsorbent mass to buffer solution volume). The Hill's adsorption isotherm model was found to best describe the adsorption processes of DON, BEA, and CIT. Calculated binding potential for YCW and YCWE using the Hill's model exhibited the same ranking for mycotoxin adsorption, indicating that BEA had the highest adsorption rate, followed by DON and CIT, which was the least adsorbed. PYCW had the highest binding potential for BEA compared with YCW and YCWE. In contrast, the Freundlich isotherm model presented a good fit for OTA adsorption by all adsorbents and CIT adsorption by PYCW. Results indicated that YCW was the most efficacious for sequestering OTA, whereas YCWE was the least efficacious. PYCW showed greater efficacy at adsorbing OTA than CIT. All adsorbents exhibited high adsorption efficacy for BEA, with an overall percentage average of bound mycotoxin exceeding 60%, whereas moderate efficacies for the other mycotoxins were observed (up to 37%). Differences in adsorbent efficacy of each adsorbent significantly varied according to experimental concentrations tested for each given mycotoxin (p < 0.05). The cell viability results from the bioassay using a bovine mammary epithelial cell line (MAC-T) indicated that all tested adsorbents could potentially mitigate mycotoxin-related damage to bovine mammary epithelium. Results from our studies suggested that all tested adsorbents had the capacity to adsorb selected mycotoxins in vitro, which could support their use to mitigate their effects in vivo.

toxicology,food science & technology
Adsorptive and responsive hybrid sponge of melamine foam and metal organic frameworks for rapid collection/removal and detection of mycotoxins

Zhishang Li,Xiahong Xu,Haoran Quan,Jie Zhang,Qi Zhang,Yingchun Fu,Yibin Ying,Yanbin Li

DOI: https://doi.org/10.1016/j.cej.2020.128268

IF: 15.1

2021-04-01

Chemical Engineering Journal

Abstract:Mycotoxins have been regarded as one of the most severe threatens to food safety and environment, however, conventional detection methods are limited by low collection efficiency and tedious detection procedures. In this work, adsorptive and responsive hybrid sponge was prepared by integrating porous fluorescent Zr-MOF (metal organic frameworks) and robust melamine sponge for simultaneous collection/removal and detection of mycotoxins. The hybrid sponge achieved high load capacity of 15.8 mg g-1 within 10 min and worked well in a wide range of pH and temperatures. The fluorescence of the hybrid sponge was efficiently quenched by AFB1 in the aqueous water in 10 min due to the hierarchical pore structure enabled absorbent-target interaction. This simple, robust and low-cost dual functional hybrid sponge enabled the detection with relatively low LOD of 1.6 ppb and wide linear range of 31.2 ppb-15.6 ppm. Additionally, AFB1 in water was quickly absorbed by the Zr-LMOF crystals on the melamine microfibers with the removal efficiency reached as high as 90%. The removal efficiency towards other mycotoxins including aflatoxin B2, aflatoxin G1, aflatoxin G2, aflatoxin M1 and ochratoxin also reached 80%. Overall, this low-cost, robust and elastic hybrid sponge has great potential in the construction of novel sensors for practical applications to ensure environmental and agricultural safety.

engineering, chemical, environmental
Exploring the Efficacy of Using Geotrichum fermentans, Rhodotorula rubra, Kluyveromyce marxiamus, Clay Minerals, and Walnut Nutshells for Mycotoxin Remediation

Gintarė Vaičiulienė,Jurgita Jovaišienė,Rimvydas Falkauskas,Algimantas Paškevičius,Neringa Sutkevičienė,Audronė Rekešiūtė,Šarūnė Sorkytė,Violeta Baliukonienė

DOI: https://doi.org/10.3390/toxins16060281

IF: 5.075

2024-06-20

Toxins

Abstract:The aim of this study was to evaluate the effectiveness of nine different biological compounds to reduce mycotoxins concentrations. The hypothesis of this study was that a static in vitro gastrointestinal tract model, as an initial screening tool, can be used to simulate the efficacy of Geotrichum fermentans, Rhodotorula rubra, Kluyveromyce marxiamus yeast cell walls and their polysaccharides, red and white clay minerals, and walnuts nutshells claiming to detoxify AFB1, ZEA, DON, and T-2 toxin mycotoxins. Mycotoxin concentrations were analyzed using high-performance liquid chromatography (HPLC) with fluorescent (FLD) and ultraviolet detectors (UV). The greatest effects on reducing mycotoxin concentrations were determined as follows: for AFB1, inserted G. fermentans cell wall polysaccharides and walnut nutshells; for ZEA, inserted R. rubra and G. fermentans cell walls and red clay minerals; for DON, R. rubra cell wall polysaccharides and red clay minerals; and for T-2 toxin, R. rubra cell walls, K. marxianus, and G. fermentans cell wall polysaccharides and walnut nutshells. The present study indicated that selected mycotoxin-detoxifying biological compounds can be used to decrease mycotoxin concentrations.

toxicology,food science & technology
Odors Adsorption in Zeolites Including Natural Clinoptilolite: Theoretical and Experimental Studies

Izabela Czekaj,Natalia Sobuś

DOI: https://doi.org/10.3390/ma17133088

IF: 3.4

2024-06-24

Materials

Abstract:This publication presents the results of combined theoretical and experimental research for the potential use of natural clinoptilolite zeolite (CLI) as an odor-adsorbing material. In this study of adsorption capacity, CLI of various granulation was used and its modifications were made by ion exchange using Sn and Fe metals to check whether the presence of metals as potential active centers does not lead to catalytic processes and may lead to enhanced absorption of odorous substances through their adsorption on the created metallic forms. Additionally, in order to increase the specific surface area, modifications were made in the form of hierarchization in an acidic environment using hydrochloric acid to also create the hydrogen form of zeolite and thus also check how the material behaves as an adsorbent. To compare the effect of CLI as a sorption material, synthetic zeolite MFI was also used—as a sodium form and after the introduction of metals (Sn, Fe). The above materials were subjected to adsorption measurements using odorous substances (including acetaldehyde, dimethylamine, pentanoic acid and octanoic acid). Based on the measurements performed, the most advantageous material that traps odorants is a natural material—clinoptilolite. Depending on the faction, its ability varies for different compounds. In the case of acetaldehyde, an effective material is clinoptilolite with a grain size of up to 2 mm. In the case of carboxylic acids, it is material after hierarchization with a fraction of 3–4 mm. In the case of theoretical calculations, information was obtained to show that metallic centers are more stable above oxygen, which is associated with the skeletal aluminum in clinoptilolite.

materials science, multidisciplinary,metallurgy & metallurgical engineering,physics, applied,chemistry, physical, condensed matter

Adsorption of mycotoxins by organozeolites.

Adsorption Performance and Mechanism of Mycotoxin on Montmorillonite Modified by Organosilicon Grafting

Lamellar mesoporous Mg-containing silicate adsorbents derived from iron ore tailings for high-efficient adsorption of mycotoxins and antibiotics

Modification of bentonite with orange peels extract and its application as mycotoxins’ binder in buffered solutions and simulated gastrointestinal fluids

Adsorption of toxic organic compounds from water with hydrophobic silica aerogels

Simultaneous Detoxification of Aflatoxin B1, Zearalenone and Deoxynivalenol by Modified Montmorillonites

Removal of Aflatoxin B 1 and Zearalenone in Mixed Aqueous Solution by Palygorskite-Montmorillonite Materials In Situ Prepared from Palygorskite Mineral

Adsorption of Volatile Organic Compounds Onto Natural Porous Minerals.

An Overview of Conventional and Emerging Analytical Methods for the Determination of Mycotoxins

Gluconobacter oxydans – potential biological agent for binding or biotransformation of mycotoxins

Innovative Use of Spirogyra sp. Biomass for the Sustainable Adsorption of Aflatoxin B1 and Ochratoxin A in Aqueous Solutions

Effect of Acid-Treated and Hexadecyltrimethylammonium Bromide–modified Montmorillonites on Adsorption Performance of Mycotoxins

Complex Interplay and Catalytic Versatility of Tailoring Enzymes for Efficient and Selective Biosynthesis of Fungal Mycotoxins

Decontamination of Mycotoxin-Contaminated Feedstuffs and Compound Feed

Advances in the Applications of Clinoptilolite-Rich Tuffs

High Efficiency of Myclobutanil Adsorption by CTAB-zeolite Structures: Experimental Evidence Meets Theoretical Investigation

Tri-octahedral bentonites as potential technological feed additive for Fusarium mycotoxin reduction

Comparative Assessment of Different Yeast Cell Wall-Based Mycotoxin Adsorbents Using a Model- and Bioassay-Based In Vitro Approach

Adsorptive and responsive hybrid sponge of melamine foam and metal organic frameworks for rapid collection/removal and detection of mycotoxins

Exploring the Efficacy of Using Geotrichum fermentans, Rhodotorula rubra, Kluyveromyce marxiamus, Clay Minerals, and Walnut Nutshells for Mycotoxin Remediation

Odors Adsorption in Zeolites Including Natural Clinoptilolite: Theoretical and Experimental Studies