Abstract:The post-modification has been promoted as an efficient approach to achieve task-specific functionalization, but conventionally consumes huge amounts of solvent, which brings great challenges in environmental risks and energy efficiency. In this work, a bi-functionalized adsorbent is fabricated by a simple yet efficient solid-phase post-modification approach. Through one-pot ball milling at room temperature, 3-mercaptopropyltri-methoxysilane (3-MPTS) and 3-aminopropyltrimethoxysilane (3-APTS) are simultaneously grafted on the polyhydroxy naphthalenediol-based porous organic polymers (NTPOP). The operating conditions are optimized through an orthogonal experiment (L9(34)), which shows superior efficiency that at room temperature by consumption only 1 mL ethanol, it takes 2 h to successfully graft 1 mmol silylation reagent on 1g NTPOP at 300 rpm. The obtained bi-functionalized adsorbent NTPOP-SH-NH2 shows excellent adsorption performance with high Langmuir adsorption capacity of Hg(II) of 357 mg g−1 and Pb(II) of 212 mg g−1, and the second-order rate constant of 0.3003 mg−1 min-l and 0.1687 g mg−1 min-l, respectively. More importantly, in a natural water containing organic compounds and various inorganic salts, NTPOP-SH-NH2 shows strong tolerance with the adsorption performance of Hg(II) and Pb(II) maintains almost unchanged. Furthermore, NTPOP-SH-NH2 exhibits extensive applicability for multi heavy metals ions, such as Hg(II), Pb(II), Cd(II), Cr(III), and Ni(II), that an extremely high removal efficiency of higher than 99% was achieved for each metal ion when they co-exist in the natural aqueous solution. Therefore, this environmentally friendly solid-phase post-modification method provides a promising strategy for the synthesis of bi-functionalized adsorbents with high removal efficiency of heavy metal ions.

Synthesis of polyacrylonitrile-grafted cross-linked N-chlorosulfonamidated polystyrene via surface-initiated ARGET ATRP, and use of the resin in mercury removal after modification

Improvement on Stability of Polymeric Latexes Prepared by Emulsion Atrp Through Copper Removal Using Electrolysis

Highly Selective Adsorption of New Bis-Opened-Triazine Materials Hybridized with a Cross-Linked Polymer Support for Palladium and Some Typical Coexisting Metals

Surface Modification of Polystyrene Latex Particles Via Atom Transfer Radical Polymerization

Efficient removal of Cu(II), Pb(II), Cr(VI) and As(V) from aqueous solution using an aminated resin prepared by surface-initiated atom transfer radical polymerization

Graft Polymerization of 2-Hydroxyethyl Methacrylate Via ATRP with Poly(acrylonitrile-Co-p-chloromethyl Styrene) As a Macroinitiator

Efficient Removal of Mercury from Wastewater Solutions by a Nitrogen-Doped Hyper-Crosslinked Polyamine

Synthesis Of Sulfur-Containing Polyacetylenes And Fabrication Of Their Hybrids With Zno Nanoparticles

Amino- and Thiol- Polysilsesquioxane Simultaneously Coating on Poly(p-Phenylenetherephthal Amide) Fibers: Bifunctional Adsorbents for Hg(II)

Adsorption and Removal of Mercury(II) by a Crosslinked Hyperbranched Polymer Modified via Sulfhydryl

Chemical modification of polystyrene foam using functionalized chitosan with dithiocarbamate as an adsorbent for mercury removal from aqueous solutions

Immobilization of 5-aminopyridine-2-tetrazole on cross-linked polystyrene for the preparation of a new adsorbent to remove heavy metal ions from aqueous solution

Selective and efficient removal of Hg (II) from aqueous media by a low-cost dendrimer-grafted polyacrylonitrile fiber: Performance and mechanism

Triazine-based sulphur-containing polymers for Hg 2+ adsorption: Efficiency and mechanism

Solid-phase synthesis of bi-functionalized porous organic polymer for simultaneous removal of Hg(II) and Pb(II)

Synthesis of amidoximated polyacrylonitrile fibers and its use as adsorbent for Cr (VI) ions removal from aqueous solutions

Utilizing Gamma Radiation to Induce Polymerization of Acrylonitrile/Methacrylic Acid on Nonwoven Fibers and its Potential Use in Metal Recovery

A facile synthesis of hyper-cross-linked polystyrene resins for phenol removal

Microwave-assisted functionalization of PAN fiber by 2-amino-5-mercapto-1,3,4-thiadiazol with high efficacy for improved and selective removal of Hg2+ from water

Preparation and metal ion adsorption properties of the resin containing sulfonic acid groups

A chelating polymer resin: synthesis, characterization, adsorption and desorption performance for removal of Hg(II) from aqueous solution