Abstract:Dielectric Electro-Active Polymer (DEAP) has been generally used to fabricate smart actuators or sensors in recent years because the DEAP-based actuators or sensors are widely considered to be potential for many applications, especially in intelligent bio-inspired robotics. However, except for the hysteresis nonlinearity which can lead to reduce tracking accuracy of actuator, the occurrence of creep also makes the response of DEAP-based actuator unstable and difficult to control, especially for tasks requiring sustained actuation where the strain is to be held constant for longer periods. Furthermore, in practical operating conditions, the external mechanical loads put on the DEAP-based actuators strongly affect the creep response induced by high voltage. Although a closed-loop strategy can be applied to eliminate the creep easily, it requires many displacement sensors which are usually expensive and difficult to install in some specific applications. Therefore, the aim of this paper is to develop a feedforward compensation scheme for dynamical cancelling the creep phenomena, considering the DEAP-based actuator is working in practical operating conditions with different input control voltages and external mechanical loads. First, a relative creep model which is only related to the properties of material is developed from five-parameters Voigt-Kevin viscoelastic model. Then, a creep compensator is obtained that can compensate the creep phenomena without inversion of creep model. Moreover, in order to fitting the compensator to varied external load situations, a neural network is used to extend the parameter of compensator as a function of input control voltages and external loads. Eventually, the proposed feedforward creep compensator has two inputs and one output. Comparative experiments have been implemented and the results clearly shown that the proposed compensator significantly reduces the creep phenomena induced by varied input control voltages and loads.

Compensating the delayed electro-optical deflector response

Recent Progress of Electro-optic Polymers for Device Applications

Electro-optic Modulator Feedback Control in Phase-Sensitive Optical Time-Domain Reflectometer Distributed Sensor.

Adaptive Phase Correction For Phase Measuring Deflectometry Based On Light Field Modulation

Performance Limitations of a Y-branch Directional-Coupler-based Polymeric High-Speed Electro-Optical Modulator

Dynamic response characteristics of optical beam deflection in liquid crystal optical phased array

Space-charge-controlled electro-optic effect: Optical beam deflection by electro-optic effect and space-charge-controlled electrical conduction

Dynamic Compensation of Load-Dependent Creep in Dielectric Electro-Active Polymer Actuators

Combined effects due to phase, intensity and contrast in electrooptic modulation. Application to ferroelectric materials

Fast beam steering with a ferroelectric-liquid-crystal optical phased array

Variable phase retarder made of a dielectric elastomer actuator

Adaptive beam steering implemented in a ferroelectric liquid-crystal spatial-light-modulator free-space, fiber-optic switch

End-to-end simulations of photonic phase correctors for adaptive optics systems

A Pulse-Duration Compensation Scheme for GHz Electro-Optic Frequency Comb

Simulation of thermo-effects in average-power Pockels cell and stress-induced birefringence compensation

Simple Adaptive First‐order PMD Compensator Using a Faraday Rotator and a Variable DGD Element

Dual-Frequency Addressed Infrared Liquid Crystal Phase Modulators with Submillisecond Response Time

Ultrasensitive Beam Deflection Measurement via Interferometric Weak Value Amplification

Laser-controlled adaptive optic for beam quality enhancement in a multipass thin disk amplifier

Electrically switchable metasurface for beam steering using PEDOT

Fourier Analysis of a Polymer Directional Coupler Electro-Optic Switch with Two-Section Cosine-Transitive CPWG Electrodes: A New Theoretical View