Abstract:Wavelength modulation-direct absorption spectroscopy (WM-DAS) combines the advantages of DAS and WMS, which can directly measure the absorbance and improve the measurement signal-to-noise ratio (SNR). It can be used to measure the spectroscopic parameters of gas molecular spectral lines. Firstly, the WM-DAS method is used to measure the absorbance of CO molecule 4 300. 700 cm(-1) spectral lines under the condition of 24. 151 mu mol center dot L-1 CO concentration, room temperature and pressure, combined with Herriott cell with an effective optical path length of about 45 m. The absorbance is optimally fitted by Voigt profile (VP)and the results show that the standard deviation of the absorbance fitting residual from WM-DAS is reduced by more than half compared with that from the traditional DAS method, which proves that the anti-interference ability of the WM-DAS method is stronger than that of the DAS method. Then, this method combined with an absorption cell with an optical path of about 50 cm was used to measurethe absorbance of 8 weak absorption spectral lines of CO at 4 278 similar to 4 304 cm(-1) under different pressures. The CO standard gas with a concentration of 0. 411 mu mol center dot L-1 was used in the experiment. The measured absorbance was fitted by VP, Rautionprofile (RP) and quadratic-speed-dependent-Voigt profile (qSDVP) to obtain the collision broadening coefficient gamma(0) (T-0), the Dicke narrowing coefficient beta(0) (T-0) and the speed-dependent collision broadening coefficient gamma(2) (T-0) in qSDVP, respectively, and the uncertainty of the measurement results was analyzed. The measured gamma(0) (T-0) obtained by Voigt profile fitting agree well with those from the HITRAN database, with a relative error of less than 1%. The measurement results of beta(0) (T-0) and gamma(2) (T-0) provide an important data for further perfecting molecular spectral database and high-precision measurement of gas parameters.

Baseline-free scanned-wavelength direct absorption spectroscopy: theoretical analysis and experimental validation

High-accuracy Sinewave-Scanned Direct Absorption Spectroscopy.

Application Conditions of Scanned-Wavelength Direct Absorption Spectroscopy for Combustion Diagnostics

Highly Sensitive, Calibration-Free WM-DAS Method for Recovering Absorbance-Part I: Theoretical Analysis

Cepstral Analysis for Baseline-Insensitive Absorption Spectroscopy Using Light Sources with Pronounced Intensity Variations

Wavelength modulation-direct absorption spectroscopy combined with improved experimental strategy for measuring spectroscopic parameters of H<sub>2</sub>O transitions near 1.39 m

Analysis of Relative Wavelength Response Characterization and Its Effects on Scanned-Wms Gas Sensing*

Baseline reduction algorithm for direct absorption spectroscopy with interference features

Wavelength Modulation Spectroscopy for Recovering Absolute Absorbance.

High Precision Calibration of Spectral Parameters of CO at 1567 Nm Based on Wavelength Modulation-Direct Absorption Spectroscopy

Long-path Supercontinuum Absorption Spectroscopy for Measurement of Atmospheric Constituents.

High Precision Measurement of Spectroscopic Parameters of CO at 2. 3 m Based on Wavelength Modulation-Direct Absorption Spectroscopy

Experimental and Simulated Study of Line-Shape Models for Measuring Spectroscopic Parameters Using the WM-DAS Method - Part I: Collisional Broadening and Absorption Coefficients of H2O-Ar System

Preflight Spectral Calibration of Airborne Shortwave Infrared Hyperspectral Imager with Water Vapor Absorption Characteristics.

Baseline-free Quantitative Absorption Spectroscopy Based on Cepstral Analysis

Analysis of Calibration-Free Wavelength-Scanned Wavelength Modulation Spectroscopy for Practical Gas Sensing Using Tunable Diode Lasers

Ultraviolet scanning technique for water COD measurement and its instrument development

Intensity-Stabilized Fast-Scanned Direct Absorption Spectroscopy Instrumentation Based on a Distributed Feedback Laser with Detection Sensitivity down to 4 × 10−6

Calibration-Free Scanned Wavelength Modulation Spectroscopy-Application to H2o and Temperature Sensing in Flames

Artificial Absorption Creation for More Accurate Tunable Diode Laser Absorption Spectroscopy Measurement

Monitoring of ambient carbon monoxide concentrations based on wavelength modulation direct absorption spectroscopy