Abstract:Background: Interlimb neural coupling implies that arm swing should be included during gait training to improve rehabilitation outcomes. We previously developed several systems for production of walking with arm swing, but the reaction forces on the foot sole during usage of the systems were not satisfactory and there was potential to improve control system performance. This work aimed to design and technically evaluate a novel system for producing walking with synchronised arm and leg movement and with dynamic force loading on the foot soles. Methods: The robotic system included a passive curved treadmill and a trunk frame, upon which the rigs for the upper and lower limbs were mounted. Ten actuators and servocontrollers with EtherCAT communication protocol controlled the bilateral shoulder, elbow, hip, knee and ankle joints. Impedance control algorithms were developed and ran in an industrial PC. Flexible pressure sensors recorded the plantar forces on the foot soles. The criteria of implementation and responsiveness were used to formally evaluate the technical feasibility of the system. Results: Using impedance algorithms, the system produced synchronous walking with arm swing on the curved treadmill, with mean RMS angular tracking error <2° in the 10 joint profiles. The foot trajectories relative to the hip presented similar shapes to those during normal gait, with mean RMS displacement error <1.5 cm. A force pattern that started at the heel and finished at the forefoot was observed during walking using the system, which was similar to the pattern from overground walking. Conclusion: The robotic system produced walking-like kinematics in the 10 joints and in the foot trajectories. Integrated with the curved treadmill, the system also produced walking-like force patterns on the foot soles. The system is considered feasible as far as implementation and responsiveness are concerned. Future work will focus on improvement of the mechanical system for future clinical application.

Design and Control of a Recovery System for Legged Robots

Active Control Of Under-Actuated Foot Tilting For Humanoid Push Recovery

Push Recovery for the Standing Under-Actuated Bipedal Robot Using the Hip Strategy

Push Recovery for Humanoid Robots with Passive Damped Ankles

Design a Fall Recovery Strategy for a Wheel-Legged Quadruped Robot Using Stability Feature Space

Robust Recovery Controller for a Quadrupedal Robot using Deep Reinforcement Learning

Dynamic Fall Recovery Control for Legged Robots via Reinforcement Learning

Biped Robot Push Detection and Recovery

Learning Arm-Assisted Fall Damage Reduction and Recovery for Legged Mobile Manipulators

Safe Balancing Control of a Soft Legged Robot

Slip Detection and Recovery for Quadruped Robots Via Orthogonal Decomposition

Mechanical Design and Control System Development of a Rehabilitation Robotic System for Walking With Arm Swing

Control System Design for an Upper-Limb Rehabilitation Robot

Rough-Terrain Locomotion and Unilateral Contact Force Regulations With a Multi-Modal Legged Robot

Robust Recovery Motion Control for Quadrupedal Robots via Learned Terrain Imagination

Push recovery with stepping strategy based on time-projection control

External force observer aided push recovery for torque-controlled biped robots

A Low-Inertia and High-Stiffness Cable-Driven Biped Robot: Design, Modeling, and Control

Learning Complex Motor Skills for Legged Robot Fall Recovery

Design, Analysis, and Experiment for Rescue Robot with Wheel-Legged Structure

Push Recovery Control Based on Model Predictive Control of Hydraulic Quadruped Robots