Abstract:As a classical type of smart materials, shape memory alloys (SMAs) are of high energy density, light weight, and low actuating voltage, and therefore are of great potential to be used as actuators for robots. Major challenges in controlling an SMA-driven soft robot are the limited bandwidth and in cases with external loads. Active cooling has been demonstrated to dramatically increase its bandwidth, but external load may cause severe inaccuracy in the system modeling. Controllers that do not rely on accurate modeling of the SMA-driven soft robot is essential. In this article, we designed an elastomeric soft robotic tentacle actuated by three pieces of SMA springs with both active heating (Joule heating) and active cooling (compressed air). We proposed a multi-input-multi-output controller that directly uses the heating and cooling states of the three SMAs to control the tentacle's bending posture in three-dimensional (3-D) space. The successful implementation of the controller is attributed to a novel dual-channel control algorithm that integrates the bending motion control and swing motion control, and a state-machine controller for coordinating the three SMAs' actuations to achieve robust swing motion control. The system with such hardware and control algorithm was capable of performing bending motions with maximum actuating speed $ > $ 90 $^\circ /$ s, deactuating speed $ > $ 25 $^\circ /$ s, closed-loop motions with rapidity (6–41 $^\circ /$ s for heating, 4–19 $^\circ /$ s for cooling), accuracy (steady-state error $ < $ 0.1 $^\circ$ for no load, 0.13 $\%$ of the full range; steady-state error $ < $ 1.2 $^\circ$ with load of 1 bodyweight, 1.6 $\%$ of the full range), and load-bearing capability (dynamic load: 1 bodyweight, static load: 8.8 bodyweights). Besides, the tentacle achieved efficient motion tracking by coordinating the bending and swing motion through the controller, for both predefined trajectories and random trajectories. We demonstrated a remotely controlled 360 $^\circ$ image scanning of a room using our proposed robotic tentacle equipped with a camera at its top end to intuitively show its performances. We believe this work will advance the design and control of SMA-driven soft continuum robots for potential uses in surgery and explorations of unknown areas.

Robust Control of a Multi-Axis Shape Memory Alloy-Driven Soft Manipulator

Design, Modeling and Motion Control of a Multi-Segment SMA Driven Soft Robotic Manipulator.

Active-Cooling-in-the-Loop Controller Design and Implementation for an SMA-Driven Soft Robotic Tentacle

Multifeedback Control of a Shape Memory Alloy Actuator and a Trial Application

Modeling and Motion Control of an Octopus-Like Flexible Manipulator Actuated by Shape Memory Alloy Wires

Simultaneous position and force control of a SMA-actuated continuum robotic module

Maximizing Consistent Force Output for Shape Memory Alloy Artificial Muscles in Soft Robots

Modeling and Motion Control of a Soft SMA Planar Actuator

Adaptive control for shape memory alloy actuated systems with applications to human–robot interaction

Model-Free Tracking Control with Prescribed Performance for a Shape Memory Alloy-Based Robotic Hand

Adaptive Variable Impedance Control for a Modular Soft Robot Manipulator in Configuration Space

Adaptive Dynamic Sliding Mode Control of Soft Continuum Manipulators

In-Situ Sensing and Dynamics Predictions for Electrothermally-Actuated Soft Robot Limbs

Design and Control of Modular Soft-Rigid Hybrid Manipulators with Self-Contact

Adaptive Nonsingular Fast Terminal Sliding Mode Control for Shape Memory Alloy Actuated System

Geometric constraint-based modeling and analysis of a novel continuum robot with Shape Memory Alloy initiated variable stiffness

Safe Supervisory Control of Soft Robot Actuators

Reinforcement Learning Control of a Shape Memory Alloy-based Bionic Robotic Hand

Performance-based data-driven optimal tracking control of shape memory alloy actuated manipulator through reinforcement learning

Embodying Control in Soft Multistable Grippers from morphofunctional co-design

Active Modeling and Control for Shape Memory Alloy Actuators