Abstract:The use of conventional imaging techniques becomes problematic when faced with challenging logistics and confined environments. In particular, such scenarios are not unusual in the field of archaeological and mining explorations as well as for nuclear waste characterization. For these applications, even the use of muography is complicated since the detectors have to be deployed in difficult areas with limited room for instrumentation, e.g., narrow tunnels. To address this limitation, we have developed a portable muon detector (muoscope) based on glass Resistive Plate Chambers (RPC) with an active area of 16 $\times$ 16 cm$^{2}$. The specific design goals taken into consideration while developing our first prototype are portability, robustness, autonomy, versatility, safety and low cost. To help further improve our design goals, we are currently studying the possibility to switch the sensitive units from strips in the old prototype to pixels for the new one However, for performing high resolution muography, the number of readout units per layer will also need to increase significantly, leading to increase in the overall cost and power consumption of the muoscope. To mitigate these issues, we are developing a novel 2D multiplexing algorithm for reading out several pixels with a single electronic channel. In this article, we give an overview of the detector development, focusing mainly on the design goals and the choice of detector technology. Furthermore, we present the details of the expected changes in the new prototype as well as a simulated 2D multiplexing study based on general principles.

Development of high-rate capable and ultra-low mass Resistive Plate Chamber with Diamond-Like Carbon

Prototype study of $0.1\%\,X_0$ and $\mathrm{MHz/cm^2}$ tolerant Resistive Plate Chamber with Diamond-Like Carbon electrodes

Radiation Hardness Studies of RPC Based on Diamond-Like Carbon Electrodes for MEG II Experiment

Study of an avalanche-mode resistive plate chamber

Production and Performance Study of Diamond-Like Carbon Resistive Electrode in MPGD

Diamond-Like Carbon for the Fast Timing MPGD

Resistive Plate Chambers for Muon Detection at LHC

Towards a portable high-resolution muon detector based on Resistive Plate Chambers

Development of Hybrid Resistive Plate Chambers

Development of High-Rate Mrpcs for High Resolution Time-Of-Flight Systems

High granularity resistive Micromegas for tracking detectors in future experiments

R&D of a Real-Size Mosaic MRPC Within the Framework of the CMS Muon Upgrade

A Prototype of a High Rating MRPC

Development of Multi-Gap Resistive Plate Chambers with Low-Resistive Silicate Glass Electrodes for Operation at High Particle Fluxes and Large Transported Charges

Performance of a New LMRPC Prototype for the STAR MTD System

Production of Long-Strip Multi-Gap Resistive Plate Chamber Module for the Star-Mtd System

Development of a new Front End electronics in Silicon and Silicon-Germanium technology for the Resistive Plate Chamber detector for high rate experiments

Beam Test Results of the First Full-Scale Prototype of CMS RE 1/2 Resistive Plate Chamber

Multigap Resistive Plate Chambers for Time of Flight Applications

Wide-Gap Resistive Plate Chamber for the Trigger System of the TOF MPD Test Bench

Study on the Position Resolution of Resistive Plate Chamber