Optimal Precoder Design for MIMO-OFDM-based Joint Automotive Radar-Communication Networks

Ceyhun D. Ozkaptan,Eylem Ekici,Chang-Heng Wang,Onur Altintas

DOI: https://doi.org/10.48550/arXiv.2109.12452

2021-09-26

Abstract:Large-scale deployment of connected vehicles with cooperative awareness technologies increases the demand for vehicle-to-everything (V2X) communication spectrum in 5.9 GHz that is mainly allocated for the exchange of safety messages. To supplement V2X communication and support the high data rates needed by broadband applications, the millimeter-wave (mmWave) automotive radar spectrum at 76-81 GHz can be utilized. For this purpose, joint radar-communication systems have been proposed in the literature to perform both functions using the same waveform and hardware. While multiple-input and multiple-output (MIMO) communication with multiple users enables independent data streaming for high throughput, MIMO radar processing provides high-resolution imaging that is crucial for safety-critical systems. However, employing conventional precoding methods designed for communication generates directional beams that impair MIMO radar imaging and target tracking capabilities during data streaming. In this paper, we propose a MIMO joint automotive radar-communication (JARC) framework based on orthogonal frequency division multiplexing (OFDM) waveform. First, we show that the MIMO-OFDM preamble can be exploited for both MIMO radar processing and estimation of the communication channel. Then, we propose an optimal precoder design method that enables high accuracy target tracking while transmitting independent data streams to multiple receivers. The proposed methods provide high-resolution radar imaging and high throughput capabilities for MIMO JARC networks. Finally, we evaluate the efficacy of the proposed methods through numerical simulations.

Signal Processing,Networking and Internet Architecture

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to design the optimal precoder when the automotive radar and communication system work jointly, in order to achieve high - precision target tracking and multi - user data transmission. Specifically, the paper focuses on the joint operation of automotive radar and communication systems in the millimeter - wave frequency band (76 - 81 GHz) by using multi - input multi - output (MIMO) orthogonal frequency - division multiplexing (OFDM) technology. The directional beams generated by traditional methods during communication will damage the imaging and target - tracking capabilities of MIMO radar. Therefore, this paper proposes a joint automotive radar - communication (JARC) framework based on MIMO - OFDM waveforms and designs an optimal precoding method, which can maintain high - resolution radar imaging and high - precision target tracking while transmitting independent data streams.

### Main problems:
1. **Tight spectrum resources**: With the large - scale deployment of connected vehicles, the V2X communication demand in the 5.9 GHz frequency band increases, resulting in tight spectrum resources that cannot support broadband applications.
2. **Compatibility between radar and communication**: The directional beams generated by traditional precoding methods during communication will affect the imaging and target - tracking capabilities of MIMO radar.
3. **Requirement for high data rate and high - precision imaging**: A method that can maintain high - precision radar imaging while transmitting multi - user data is required.

### Solutions:
1. **MIMO - OFDM waveforms**: Use the preamble part of MIMO - OFDM waveforms to perform MIMO radar processing and communication channel estimation simultaneously.
2. **Optimal precoding design**: A method of optimal precoding design is proposed, which can maintain high - precision target tracking while transmitting independent data streams.
3. **Performance evaluation**: The effectiveness of the proposed method is verified by numerical simulation, showing its advantages in high - resolution radar imaging and high - throughput communication.

### Technical details:
- **System model**: Describes the transmission signal model and transceiver architecture of the joint MIMO system, including virtual MIMO radar processing.
- **Communication channel**: Considers the communication channel in a multi - user scenario and proposes the minimum SINR constraint to ensure that each receiving - end data stream receives sufficient signal strength.
- **Radar channel**: Models the point - target reflection signals in the radar channel and derives the radar channel matrix and target - parameter estimation method.
- **Range - angle imaging method**: Proposes a range - angle imaging method based on DFT, which solves the frequency - space coupling effect and improves the accuracy of target detection and parameter estimation.
- **Performance indicators**: Derives the Cramér - Rao lower bound (CRLB) of target - range and angle estimation and defines the positioning - accuracy indicator.

### Contributions:
- Proposes an efficient range - angle imaging method, which uses the preamble and precoding symbols of MIMO - OFDM waveforms for high - resolution MIMO radar imaging.
- Derives the performance indicators of MIMO radar imaging and multi - user MIMO communication functions.
- Designs a joint precoding method to achieve independent data transmission and high - precision target tracking, and simultaneously evaluates the trade - off between communication and radar performance.

Through these methods, the paper provides an effective solution for the efficient joint operation of automotive radar and communication systems in the millimeter - wave frequency band.