Abstract:Plasmonic waveguides based on 2D materials, which enable the formations of guided modes confined around few-layered material, are promising plasmonic platforms for the miniaturization of photonic devices. Nonetheless, such waveguides support modes that are evanescent in the waveguide core with the majority of the fields concentrated around waveguide edges, which are different from those supported by 3D dielectric waveguides where the modal fields are of oscillatory nature and peak at the center. As a result, many photonic devices and functionalities that can be achieved within 3D dielectric waveguides based on total-internal-reflation modes cannot be realized using 2D material-based plasmonic structures. In this work, we propose and demonstrate how to leverage anisotropy in 2D materials to tailor of modal fields supported by 2D material waveguide for the first time. By regulating material absorption of the constituent 2D materials, the modal fields of these 2D modes can be tailored to localize around the waveguide center, which in turn can improve the efficiencies of coupling-based photonic functions using 2D materials, from in-plane multimode-interference couplers to out-of-plane optical radiation. Using natural anisotropic 2D materials such as black phosphorus, these pivotal functions can expand existing device capabilities that are typically achieved in 3D dielectrics but using 2D materials, thus allowing for the implementation of 2D plasmonic circuits with no need to relying on 3D layers.

What problem does this paper attempt to address?

This paper aims to solve the problem of how to use the anisotropy of two - dimensional materials to achieve photon - related functions. Specifically, the paper focuses on how to localize the modal fields supported by two - dimensional material waveguides at the center of the waveguide by adjusting the absorptivity and anisotropy of two - dimensional materials, thereby achieving an oscillating field distribution similar to that in three - dimensional dielectric waveguides. This will help improve the coupling efficiency of photon - based devices made of two - dimensional materials, from in - plane multi - mode interference couplers to out - of - plane optical radiation and other functions. ### Main problems in the paper 1. **Achievement of oscillating fields**: Traditionally, the mode fields supported by plasmonic waveguides based on two - dimensional materials decay exponentially in the core part of the waveguide, and most of the fields are concentrated at the edges of the waveguide. This is different from the modes in three - dimensional dielectric waveguides based on total internal reflection, where the core fields are oscillating and reach their peaks at the center of the core. The paper proposes a method to localize the mode fields supported by two - dimensional material waveguides at the center of the waveguide by adjusting the absorptivity and anisotropy of the materials, thereby achieving an oscillating field distribution. 2. **Expansion of photon - related functions**: Many photon - related functions based on three - dimensional dielectric waveguides, such as in - plane coupling devices (e.g., multi - mode interference couplers and array waveguide gratings) and out - of - plane coupling devices (e.g., grating structures), cannot be directly achieved in plasmonic waveguides made of two - dimensional materials. The paper shows how to use anisotropic two - dimensional materials to achieve these functions, thereby expanding the applications of two - dimensional materials in integrated photonics. ### Main contributions - **Theoretical analysis and numerical verification**: Through theoretical analysis and numerical simulation, the paper shows how to use the anisotropy of two - dimensional materials to achieve modes with oscillating field distributions. In particular, by adjusting the absorptivity and anisotropy of the materials, the localization of the mode fields at the center of the waveguide can be significantly enhanced, thereby improving the coupling efficiency. - **Design of new photon - based devices**: The paper proposes design schemes for multi - mode interference couplers and out - of - plane coupling devices based on anisotropic two - dimensional materials. These designs can not only achieve efficient photon - related functions at deep sub - wavelength scales, but also make use of the design knowledge in three - dimensional optics. - **Non - resonant broadband antennas**: The paper also explores how to use the material absorption characteristics of anisotropic two - dimensional materials to design non - resonant broadband antennas to achieve efficient out - of - plane coupling. Such antennas have broadband operation and high tolerance to manufacturing errors. In conclusion, by using the anisotropy of two - dimensional materials, this paper solves the limitations of plasmonic waveguides made of two - dimensional materials in achieving complex photon - related functions, providing new approaches for future integrated photonics and the applications of two - dimensional materials.

Integrated Photonic Functions Using Anisotropic 2D Material Structures

Structure-Induced Hyperbolic Dispersion in Waveguides

Field canalization using anisotropic 2D plasmonics

Characterization of Planar Hybrid Dielectric-Loaded Plasmonic Nano-Waveguides Used for Nano-Photonic Circuits

Two‐Dimensional Materials for Integrated Photonics: Recent Advances and Future Challenges

Speed-up electronic integrated circuits with plasmonic technology

Optical Performance Of Single-Mode Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Components

Dispersion Engineering of Hyperbolic Plasmons in Bilayer 2D Materials

Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Power Splitter and Ring Resonator: Compact Size and High Optical Performance for Nanophotonic Circuits

The Optical Properties and Plasmonics of Anisotropic 2D Materials

Two-Dimensional Analysis Photothermal Properties in Nanoscale Plasmonic Waveguides for Optical Interconnect

Efficient Directional Coupler Based on Plasmonic Waveguide for Photonic Integrated Circuits

Tuning Two-Dimensional Hyperbolic Plasmons in Black Phosphorus

All Dielectric Metamaterial Loaded Tunable Plasmonic Waveguide

Hybrid Dielectric-Loaded Plasmonic Waveguide and Wavelength Selective Components for Efficiently Controlling Light at Subwavelength Scale

Engineering Plasmonic Environments for 2D Materials and 2D-Based Photodetectors

Waveguides Used for Nano- Photonic Circuits

Glass-on-2-D-material Photonics

Symmetrical Anisotropy Enables Dynamic Diffraction Control in Photonics

Allying nanophotonic structures with two-dimensional van der Waals materials

Functionalizing nanophotonic structures with 2D van der Waals materials