Abstract:Here we show that compressive sensing allows 4-dimensional (4-D) STEM data to be obtained and accurately reconstructed with both high-speed and reduced electron fluence. The methodology needed to achieve these results compared to conventional 4-D approaches requires only that a random subset of probe locations is acquired from the typical regular scanning grid, which immediately generates both higher speed and the lower fluence experimentally. We also consider downsampling of the detector, showing that oversampling is inherent within convergent beam electron diffraction (CBED) patterns and that detector downsampling does not reduce precision but allows faster experimental data acquisition. Analysis of an experimental atomic resolution yttrium silicide dataset shows that it is possible to recover over 25 dB peak signal-to-noise ratio in the recovered phase using 0.3% of the total data. Lay abstract: Four-dimensional scanning transmission electron microscopy (4-D STEM) is a powerful technique for characterizing complex nanoscale structures. In this method, a convergent beam electron diffraction pattern (CBED) is acquired at each probe location during the scan of the sample. This means that a 2-dimensional signal is acquired at each 2-D probe location, equating to a 4-D dataset. Despite the recent development of fast direct electron detectors, some capable of 100kHz frame rates, the limiting factor for 4-D STEM is acquisition times in the majority of cases, where cameras will typically operate on the order of 2kHz. This means that a raster scan containing 256^2 probe locations can take on the order of 30s, approximately 100-1000 times longer than a conventional STEM imaging technique using monolithic radial detectors. As a result, 4-D STEM acquisitions can be subject to adverse effects such as drift, beam damage, and sample contamination. Recent advances in computational imaging techniques for STEM have allowed for faster acquisition speeds by way of acquiring only a random subset of probe locations from the field of view. By doing this, the acquisition time is significantly reduced, in some cases by a factor of 10-100 times. The acquired data is then processed to fill-in or inpaint the missing data, taking advantage of the inherently low-complex signals which can be linearly combined to recover the information. In this work, similar methods are demonstrated for the acquisition of 4-D STEM data, where only a random subset of CBED patterns are acquired over the raster scan. We simulate the compressive sensing acquisition method for 4-D STEM and present our findings for a variety of analysis techniques such as ptychography and differential phase contrast. Our results show that acquisition times can be significantly reduced on the order of 100-300 times, therefore improving existing frame rates, as well as further reducing the electron fluence beyond just using a faster camera.

Event driven 4D STEM acquisition with a Timepix3 detector: microsecond dwell time and faster scans for high precision and low dose applications

From STEM to 4D STEM: Ultrafast Diffraction Mapping with a Hybrid-Pixel Detector

High-speed 4-dimensional scanning transmission electron microscopy using compressive sensing techniques

The 4D Camera: an 87 kHz direct electron detector for scanning/transmission electron microscopy

Synchronization of scanning probe and pixelated sensor for image-guided diffraction microscopy

Ultra-fast Digital DPC Yielding High Spatio-temporal Resolution for Low-Dose Phase Characterization

Ultra-fast Digital DPC Yielding High Spatio-Temporal Resolution for Low-Dose Phase Characterisation

4D-STEM Ptychography for Electron-Beam-Sensitive Materials

Increasing Spatial Fidelity and SNR of 4D-STEM Using Multi-Frame Data Fusion

Fast Pixelated Detectors in Scanning Transmission Electron Microscopy. Part I: Data Acquisition, Live Processing and Storage

Sub-100 nanosecond temporally resolved imaging with the Medipix3 direct electron detector

Data-efficient 4D-STEM in SEM: Beyond 2D Materials to Metallic Materials

Fast Pixelated Detectors in Scanning Transmission Electron Microscopy. Part II: Post Acquisition Data Processing, Visualisation, and Structural Characterisation

Live processing of momentum-resolved STEM data for first moment imaging and ptychography

Simultaneous High-Speed and Low-Dose 4-D STEM Using Compressive Sensing Techniques

Complementary ADF-STEM: a Flexible Approach to Quantitative 4D-STEM

Development of a Practicable Digital Pulse Read-out for Dark-field STEM

Optimizing Contrast in Automated 4D STEM Cryotomography

On the temporal transfer function in STEM imaging from finite detector response time