Recyclable flame-retardant epoxy composites based on disulfide bonds. Flammability and recyclability

Xiaolu Li,Jing Zhang,Lu Zhang,Alaitz Ruiz de Luzuriaga,Alaitz Rekondo,De-Yi Wang

DOI: https://doi.org/10.1016/j.coco.2021.100754

2021-05-05

Abstract:A series of recyclable epoxy resin (REP) composites are successfully prepared in this study, aiming to improve flame retardancy while keep good recyclability and mechanical properties. The commercial 9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-Oxide (DOPO) with high reactive P-H bond is used as highly-efficient flame retardant in this work. Compared with pure epoxy resin with a limited oxygen index of 21.7 % and no rating in vertical burning test, recyclable epoxy resin only with 3 wt% DOPO acquires a limited oxygen index value of 27.8% and V-0 rating. In addition, REP composites containing 4 wt% DOPO displays quick self-extinguishing behavior, which shows the 43.5% drop of the peak heat release rate. The main reason might be that traditional phosphorous-containing flame retardant existing in REP composites can play a positive role in both condensed phase and gas phase when burning. On the other hand, both scanning electron microscopy and Raman results also further affirm the improved flame retardancy. Moreover, flame-retardant REP composites can also maintain good transparency and mechanical properties. As well as the favorable recyclability originated from the special exchangeable disulfide crosslinks. High-Performance REP composites possessing expected flame retardancy, recyclability and good mechanical properties pave the way to broaden applications of thermoset epoxy materials.

Applied Physics,Materials Science

What problem does this paper attempt to address?

This paper aims to address two main challenges in the application of epoxy resin (EP) materials: **flame retardancy** and **recyclability**. Specifically:

1. **Flame retardancy**: Epoxy resin is a widely used thermosetting resin, but it is inherently flammable, which limits its use in some application areas requiring high - flame - retardant performance. Therefore, improving the flame - retardant performance of epoxy resin is an important research direction.

2. **Recyclability**: Once the traditional thermosetting epoxy resin is cured, it is difficult to dissolve or reshape again due to its cross - linked structure, resulting in resource waste and cost increase. Therefore, the development of recyclable epoxy resin materials is of great significance for environmental protection and resource conservation.

To solve these two problems, the paper proposes a recyclable flame - retardant epoxy composite (REP) based on disulfide bonds. By introducing highly reactive 9,10 - Dihydro - 9 - oxa - 10 - phosphaphenanthrene 10 - Oxide (DOPO), this study not only improves the flame - retardant performance of epoxy resin, but also maintains its mechanical properties and transparency, while achieving the recyclability of the material.

### Main contributions
- **Flame - retardant performance**: Adding a small amount of DOPO (3 wt%) can significantly improve the flame - retardant performance of epoxy resin, enabling it to pass the UL - 94 V - 0 grade test, and the limiting oxygen index (LOI) is increased from 21.7% to 27.8%.
- **Recyclability**: By introducing a dynamic disulfide - bond cross - linked network, the epoxy resin composite can be re - processed through dynamic exchange reactions at high temperatures, thereby achieving multiple recycling of the material.
- **Mechanical properties and transparency**: Even with the addition of a flame retardant, the composite still maintains good mechanical properties and transparency, broadening its application range.

In conclusion, this study provides a new approach for the development of high - performance, environmentally - friendly thermosetting epoxy resin materials.