Abstract:The current research of the global chassis control problem for the full drive-by-wire vehicle focuses on the control allocation (CA) of the four-wheel-distributed traction/braking/steering systems. However, the path following performance and the handling stability of the vehicle can be enhanced a step further by automatically adjusting the vehicle speed to the optimal value. The optimal solution for the combined longitudinal and lateral motion control (MC) problem is given. First, a new variable step-size spatial transformation method is proposed and utilized in the prediction model to derive the dynamics of the vehicle with respect to the road, such that the tracking errors can be explicitly obtained over the prediction horizon at varying speeds. Second, a nonlinear model predictive control (NMPC) algorithm is introduced to handle the nonlinear coupling between any two directions of the vehicular planar motion and computes the sequence of the optimal motion states for following the desired path. Third, a hierarchical control structure is proposed to separate the motion controller into a NMPC based path planner and a terminal sliding mode control (TSMC) based path follower. As revealed through off-line simulations, the hierarchical methodology brings nearly 1700% improvement in computational efficiency without loss of control performance. Finally, the control algorithm is verified through a hardware in-the-loop simulation system. Double-lane-change (DLC) test results show that by using the optimal predictive controller, the root-mean-square (RMS) values of the lateral deviations and the orientation errors can be reduced by 41% and 30%, respectively, comparing to those by the optimal preview acceleration (OPA) driver model with the non-preview speed-tracking method. Additionally, the average vehicle speed is increased by 0.26 km/h with the peak sideslip angle suppressed to 1.9°. This research proposes a novel motion controller, which provides the full drive-by-wire vehicle with better lane-keeping and collision-avoidance capabilities during autonomous driving.

Models and Predictive Control for Nonplanar Vehicle Navigation

A Fast Cornering Method Based on Model Predictive Control

Vehicle Models and Optimal Control on a Nonplanar Surface

Path Following of Autonomous Surface Vehicles with Line-of-sight and Nonlinear Model Predictive Control

Nonlinear Model Predictive Path Tracking Control for Autonomous Vehicles Based on Orthogonal Collocation Method

Predictive Braking on a Nonplanar Road

A Nonlinear Model Predictive Control for Automated Drifting with a Standard Passenger Vehicle

Neural Network Model Predictive Motion Control Applied to Automated Driving With Unknown Friction

Spatial-based Predictive Control for Vehicle Collision Avoidance by Steering Maneuvers

An efficient model-free setting for longitudinal and lateral vehicle control. Validation through the interconnected pro-SiVIC/RTMaps prototyping platform

Nonlinear stochastic predictive control with unscented transformation for semi-autonomous vehicles

Frenet-Cartesian Model Representations for Automotive Obstacle Avoidance within Nonlinear MPC

Adaptive Model Predictive Control for Intelligent Vehicle Trajectory Tracking Considering Road Curvature

Optimal Predictive Control for Path Following of a Full Drive-by-Wire Vehicle at Varying Speeds

Friction-Adaptive Stochastic Nonlinear Model Predictive Control for Autonomous Vehicles

Comparison of two non-linear model-based control strategies for autonomous vehicles

Fast Trajectory Planning for Automated Vehicles Using Gradient-Based Nonlinear Model Predictive Control

Model predictive trajectory optimization and tracking for on-road autonomous vehicles

Coupled Lateral and Longitudinal Control for Trajectory Tracking, Lateral Stability, and Rollover Prevention of High-Speed Automated Vehicles Using Minimum-Time Model Predictive Control

Lane Detection and Trajectory Tracking Control of Autonomous Vehicle Based on Model Predictive Control

Model Predictive Contouring Control for Vehicle Obstacle Avoidance at the Limit of Handling Using Torque Vectoring